Latest hydro pump Tenders | Government hydro pump Tenders

State Government

CTN :45724795

13 Jul, 2026 5.00 Lacs

Jhunjhunu - Rajasthan

Tender For annual rate contract for reparing & rewinding work of centrifugal pump set (monoblock/ coupled) at rural water supply schemes under phed division nawalgarh

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

CTN :45624154

08 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : procurement of spares for 6kl and 10 kl transformer oil filtration machines- coarse filter pp coarse filter pp, cotton yarn on ss core.61 mm diax20 inch long (5 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), fine filter pp cotton yarn on ss core.61 mm diax20 inch long (1 micron), 01 set equals to 18 nos. (for 10kl transformer oil filtration machine of nach make), coarse filter resin bonded cellulose/ 1 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., fine filter max.filtration of particle size:0.5 micron, catridge type, active length:500mm. (for 6kl transformer oil filtration machine)., heater element type: indirect, 2.77 kw, 1ph,230 v ac, temperature range:30-110 deg.cen, (for 6 kl transformer oil filtration machine)., heater element type: indirect, 4 kw,1ph,230v ac temperature range:30-110 deg.cen, (for 10 kl transformer oil filtration machine)., vacuum pump oil, for 10000 lph transformer oil filtration machine, roots pump oil, dial type thermometer 0-150 deg c, oil inlet motor with pump pump make: del pd pumps and gears(p) ltd pump type: positive displacement with gear pump. model: hgn-150 size: 1 half inch bsp, 1440 rpm min capacity: 110 lpm max. pressure: 10kg/cm motor make and type: siemens, 3 ph., induction type rating: 415v, 5.1a, 3 hp (2.2 kw), 1430 rpm type of starter: dol min. suction head at rated output(meters): 3-5 mtrs frame: 100l, oil outlet motor with pump(6kl) flow well canned motor pump set pump make: cee dee/flowwell pump type: glandless centrifugal. capacity: 6000 lpm motor make and type: monoblock rating: 415v, 50 hz, 3 hp output: 2.2 kw type of starter: dol min. suction head at rated output(meters): 15 mtrs flow: 100 lpm type: cmp: 0.18.6, water pump capacity: 18lpm type: centrifugal make: cri/kirloskar/reputed, smps(6kl) i/p: 230 vac o/p: 24 vdc, 5a make: nhp, mx-o contactor(6kl) i/p: 240 vac, 2no+2nc type: 22e suitable for 55 deg.cen make: landt, oil inlet motor with pump(10kl) inlet gear pump: del pd pumps and gears (p) ltd model: hgn-250 size: 2 half inch bsp, 1440 rpm min. capacity: 350 lpm max. pressure: 10kg/cm motor make: crompton greaves limited rating: 5 hp, 415 vac, 50 hz, 1430 rpm, frame: nd112m, oil outlet motor with pump(10kl) make: nxl flow instruments rating: 3 ph. 415vac, 2850 rpm, 7.5/10 hp, 10000 lph, glandless pump: nxl model: 31100 s head: 15 mtrs discharge: 200 lpm size: 65 x 38 mm, solenoid valve: rating: 24v dc, 50nb, threaded end 0.00 to 4.00 bar 80 deg.cen model: 9230d504/cf8/s6/bn/bsp m50-rd/gp/h make: avcon, solenoid valve: rating: 230 vac / 8 w, 1 by 4 th inch nb, threaded type make: kushako, solenoid valve: rating: 230 vac,50 hz, 40nb operating pressure: 0 kg/cm 2 5 kg/cm 2 model: uw-40-1 bsp make: avcon/pro-unid, solenoid valve: rating: 230 vac,50 hz, 45nb operating pressure: 0.00 to 2.00 bar model: 9220a6015/br/s4/bn/bsp m45-1-rd/gp/h make: avcon/pro-unid, solenoid valve: rating: 230vac, 50hz model: m50 h make: avcon, solenoid valve: rating: 24vdc, 40 nb make: avcon

Central Government/Public Sector

CTN :45469070

02 Jul, 2026 6.75 Crore

Goa - Goa

Tender For corrigendum : annual operation & day to day maintenance of internal & external e&m installations at goa international airport for the year 2026-2028. - servicing, testing and checking of breakers , "servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. l&t make acb of rating 800-1600 a " , "servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. l&t make acb of rating 2000 a - 2500a " , servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. l&t make acb of rating 3200a - 4000a , servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. schneider make acb of following rating , servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. ge make acb of following rating , one time servicing, checking and testing of 33kv vaccum circuit breakers (vcb) including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. make jyoti , servicing, checking and calibration of the following relays as per recommended standards and submission of calibration report complete as required through authorised agency of oem / agency approved by engineer-in-charge. , servicing of 3x 4kw grundfos make hydropneumatic pumps along with control panel which includes cleaning, safety check, motor, gear box, drive check, vfd parameters check etc. as per oem recommendation through oem or authorised service partner of oem. , servicing of 0.55 kw - 5kw grundfos make pumps which includes cleaning, safety check, motor, gear box, drive check etc. as per oem recommendation through oem or authorised service partner of oem. , dehydration & filteration of transformer oil of 1000 kva transformer of aai residential colony to improve the breakdown voltage of oil up to 50 kv by oil filtration machine and carrying out bdv test of oil, top up of transformer oil etc. by keeping the dehydration equipment out side the 33kv yard including transportation of filtration machine up to site etc. complete as required (excluding the cost of transformer oil). , "the execution of items mentioned in cpwd, delhi schedule of rates (e&m) 2025 for electrical repair and maintenance of electrical e&m installations as and when required as per direction of engineer-in-charge at goa airport for period of two years. agency will quote against basic rate of rs. 5,00,000.00 (say x) (including gst) in ""rate column"" for examples : (i) if bidder is quoting rs. 4,00,000.00 (including gst) (y1) then it will be

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45632639

30 Jun, 2026 8.8 Thousand

Dehradun - Uttarakhand

Tender For supply of oil filter , fuel filter , air cleaner cover assy , hydrolic pump repair kit , kilometer cable , fuel pipe inlet , bearing , carbon bush set , bulb 12v 8 amp , fuel flexible pipe , repair kit minor , ignition switch

State Government

CTN :45640697

13 Jul, 2026 2.35 Lacs

Alwar - Rajasthan

Tender For providing, installation, testing and commissioning of centrifugal monoblock pump set in rwss harsoli under subdivision kotkasim of division bhiwadi

State Government

CTN :45641768

13 Jul, 2026 2.35 Lacs

Alwar - Rajasthan

Tender For providing, installation, testing commissioning of centrifugal monoblock pump set in rwss harsoli under subdivision kotkasim of division bhiwadi ncr

State Government

CTN :45397934

29 Jun, 2026 9.43 Lacs

Alwar - Rajasthan

Tender For corrigendum : regular operation maintenance of pump house with centrifugal monoblock pump set , starter etc. at various at rwss narayanpur under sub division narayanpur, division bansur - regular operation & maintenance of pump house with centrifugal/monoblock pump set , starter etc. at various at rwss narayanpur under sub division narayanpur, division bansur.

State Government

CTN :45570487

29 Jun, 2026 31.33 Lacs

Bharathpur-Rj - Rajasthan

Tender For 05/2026-27 providing laying jointing and commisioning of pipeline and centrifugal monoblock pump set in saras dairy plant madarpur road bharatpur under uwss bharatpur

Hydro Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

State Government