Latest hydropneumatic pump Tenders | Government hydropneumatic pump Tenders

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

Central Government/Public Sector

CTN :43081602

15 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of lub water pump cw system ntpc khargone

Central Government/Public Sector

CTN :43052802

10 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of head shaft for wpil make st 3 cw pump

Central Government/Public Sector

CTN :43061608

09 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of spares for cw pump-cvp2100 of kbl make for ntpc gadarwara - gasket for lock nut,8070101,cvp 2100, blind flange gasket,6850101,cvp 2100, gskt/companion flg,5180101,cvp 2100, o-ring,5250301,kbl,pump,cvp-2100, circlip,4850101,kbl,pump,cvp-2100, impeller lock nut,3300101,kbl,pump

CTN :43062017

15 Dec, 2025 NA

Kadapa - Andhra Pradesh

Tender For dr. mvr rtpp-m12-cam-stage1-procurement of cw pump shaft assembles suitable for pump model no. cw 1q b6 goa-reg

State Government

CTN :42756492

08 Dec, 2025 3.94 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work contract for fabrication and erection work of pit below ground level near cw pump house of phase-i to collect discharge of drains of ph-1 and 2 and laying of pipeline at 2x600 mw, sstpp, mppgcl, dongalia.

corporations/Associations/Others

CTN :42941512

01 Jan, 2026 NA

Anpara - Uttar Pradesh

Tender For supply of misc items for ffsd-i & ahd btps anpara - ht hex head full thread nut & bolt ; m16x65 mm,, ht hex head full thread nut & bolt ; m16x70 mm,, hthh bolt with nut & washer , half threaded m16x90, hex hd m18x70; ht 10.9 grade, ms bolt & nut size 20x70 mm, ht hex bolt & nut 20x80fth, fluidizing pads for esp hoppers, size: 374 mm x 374 mm, no. of holes: 16, hole dia: 12 mm material: nomex (as per sample), perforated ms plate, size: 374 mm x 374 mm, having 4.76 mm dia holes at 7.14 mm pitch giving 40.5 % open area plate thickness: 1.6mm, no. of mounting holes: 16, hole dia: 12 mm (as per sample), submersible pump, make-kirloskar, model-eterna 1100 cw+ specification : power supply-415v, 3phaseacpower rating-1.1kw/1.5hpmax. solid handling size (mm) - 24minimum submergence (mm) - 460suction - from bottomsize discharge outlet (mm) - 50max. amb. temperature - 40 degree cdischarge 366 to 84 lpmtotal head - 6 to 14 mtrsspeed (nominal) 2800 rpm, discharge tube with fmb(foam making branch) for mechanical foam extinguisher 50 ltr. discharge tube shall be braided rubber plasticof 3.5 mtr length & 12.5 mm internal dia. fitted with plastic fmb (is-7328) as per is-13386 the discharge hose shall have bu stingpressure of not less than 50 kg/cm . (as per sample), discharge tube for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit withdcp fire extinguisher (plunger type) capacity 5 kg and other end to discharge powder.(as per sample), discharge tube washer for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of rubber suitable to be fitted withdischarge tube of dcp fire extinguisher (plunger type) capacity 05 kg.(as per sample), discharge tube for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit withdcp fire extinguisher (plunger type) capacity 10 kg and other end to discharge powder.(as per sample), discharge tube washer for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of rubber suitable to be fitted withdischarge tube of dcp fire extinguisher (plunger type) capacity 10 kg.(as per sample), cap rubber washer for dcp(dry chemical powder) 75 kg extinguishers.made of rubber, suitable to fit in the cap assembly of dcpfire extinguisher capacity 75 kg.(as per sample), discharge tube for dcp 75 kg extinguishers. discharge tube/hose with nozzle squeeze grip aluminum lengths -5 mtr. suitable fordcp type fire extinguisher capacity-75 kg.(as per sample), washer for copper connecting tube 75kg dcp(dry chemical powder) extinguisher. made of rubber. suitable for fitting with copperconne cting tube of dcp 75 kg extinguisher.(as per sample), discharge tube for 9 ltr water type extinguishers (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fittingwithin the thread of squeeze grip assembly of water type fire extinguisher capacity 9 litre (squeeze grip type).(as per sample), discharge tube washer for 9 ltr water type extinguishers (squeeze type). made of rubber. suitable to be fitted with discharge tube/hoseof water type fire extinguisher (squeeze grip type) capacity 09 litre.(as per sample), port tube for 9 ltr water type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit insidecap assembly of water type fire extinguisher capacity 9 litre (squeeze grip type) for release of water when activated. as per sample), siphon tube for 9 ltr water type extinguishers (squeeze grip type). siphon tube suitable for 9 ltr. water type extinguishers (squeezegrip type).(as per sample), cap assembly for 9ltr water type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip foractivation to facilitate the discharge of water. suitable to be fitted in 9l water type extinguishers (squeeze grip type).(as per sample), cap assembly washer for for 9 ltr water type extinguishers (squeeze grip type). as

CTN :42788543

09 Dec, 2025 NA

Kadapa - Andhra Pradesh

Tender For corrigendum : dr. mvr rtpp-m12-cam-stage3-procurement of pump casing suitable for cw 1q model cw pump-reg.

State Government

CTN :42976954

29 Dec, 2025 NA

Midnapore - West Bengal

Tender For supply of di specials for the work design construction of gslr (4900 cum) at nandakumar block gslr (3800 cum ) at chandipur block including high lift pump house, chlorine room, store room, sub station building, administrative building, guard - < supply of di specials for the work "design & construction of gslr (4900 cum) at nandakumar block & gslr (3800 cum ) at chandipur block including high lift pump house, chlorine room, store room, sub station building, administrative building, guard room, staff quarter and other allied structures and construction of zonal overhead reservior (27 nos) including soil investigation of different capacity along with cw rising main ,laying of distribution pipeline and fhtc (51946 nos) including sinking of big dia tube wells and its connections and other allied works as per direction of eic including 1 years operation and maintenance after successful trail run(180 days) for surface water based water supply scheme for nandakumar block and chandipur block under tamluk division phe dte.>

Hydropneumatic Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors