Latest hylomar jointing compound Tenders | Government hylomar jointing compound Tenders

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government/Public Sector

CTN :45326383

04 Jun, 2026 1.45 Lacs

Mugma - Jharkhand

Tender For retro-reflective tape pasting at suitable position on 17 nos.dumper ,water sprinkler ws-28189 and tyre handler bl-14th at dahibari ocp, cv area.

CTN :45032622

01 Jun, 2026 30.00 Lacs

Chhatarpur - Madhya Pradesh

Tender For inviting rates for procurement of civil work samgri for financial year 2026 to 2027 - metal 6 mm , including spreading murram, , centering shuttering ply bali, , centering shuttering iron plate pail, , chips of various sizes (40 mm thick), , stone dust, , jali grills etc. (complete with shutters, hinges etc.), , complete iron centering (including installation and dismantling), , brick (potter, local), , brick chimney (second class), , stone 20x20x20 cm., , wolder (oversize) 90 to 63 mm (local), , ballast (63 to 45 mm local), , ballast 40 mm (crusher), , ballast 20 mm (crusher), , sand local, , black soil, , cement isi mark 53 grade 50 kg velocity, , enamel paint (nerolac), , distemper (nerolac), , emulsion (nerolac), , interior paint (nerolac), , putty complete, , marble stone white, , marble stone black, , kota stone, , 8 gauge steel sheet, , 10 gauge steel sheet, , 12 gauge steel sheet, , 18 gauge steel sheet, , s west's sheet, , iron rod 8 ma,, , iron rod 10 ma,, , 12 mm iron rod, , iron rod 16 ma,, , angle, , gutter size wise, , oil distemper, , primer, , mixer machine (diesel, with driver), , soil dumping 01 km, , soil fikai 02 km, , soil fikai 03 km, , soil fikai 04 km, , jvc machine 03d, , lnt machine 200, , stanleys steel, , colour g.i. profile seat tata company 4x16, , steel roofing seat tata company 4x16, , complete with retro reflective seat board with writing and fittings, , tractor trolley (with diesel driver) up to two km, , dumper 03 sec capacity (including diesel driver) up to 2 km, , dumper 04 cc capacity (with diesel driver upto, , pvc false ceiling paneling work, , p.v.c. wallpapering work, , acp paneling single colour, , acp paneling wooden colour, , aluminum window and door 3 trucks complete with glass, , aluminum window and door 2 trucks complete with glass, , aluminum partition complete, , aluminum door closer, , complete with 12mm coach with fittings, , 08 mm coach complete with fittings, , wpc door 25 mm thickness, , wpc door 30 mm thickness, , wpc door frame 24.6 feet long, , granite stone, , forged gi chain link for fencing, , facing gi bonded wire, , 40x40x6 including sliding shutter frame, , white mica sheet, , color mica sheet, , fevicol, , nail 02 inch, , nail 01 inch, , mica tape, , pop false ceiling, , firewood, , rcc chair, , lawn mower, , godrej almirah buddy 20 gauge, , godrej almirah small 20 gauge, , box box large 20 gauge, , box box left 20 gauge, , ply 10 mm, , ply 12 mm, , ply 18 mm, , ply 19 mm, , hilti on rent with lever, , pcc m-15 complete, , rcc above m-20 plinth, , below the shuttering plinth, , above shuttering plinth, , tmt bar with binding as required, , aluminium work with 4mm glass in any size and shape with complete finishing, , aluminium work with 6mm glass in any size and shape with complete finishing, , rcc hume pipe np3 1200 mm, , rcc hume pipe np3 1000 mm, , rcc hume pipe np3 600 mm, , rcc hume pipe np3 400 mm, , rcc hume pipe np3 200 mm, , rcc hume pipe np3 100 mm, , rcc hume pipe np2 1200 mm, , rcc hume pipe np2 1000 mm, , rcc hume pipe np2 600 mm, , rcc hume pipe np2 400 mm, , rcc hume pipe np2 200 mm, , angle frame banners, , pipe frame banner wall, , pavers 60 mm, , pevse 80 mm, , pevse 100 mm, , pre cast conduit 30x.45, , pre cast conduit .45x.45, , pre cast conduit. 45x.60, , rcc cover for drain 75x.80x.10 cm, , rcc cover for drain 0.60x.80x.10 cm, , chamber iron, , pvc profile seat

CTN :45303092

08 Jun, 2026 NA

Delhi - Delhi

Tender For supply of instant curing bituminous ready cold mix , coarse sand zone iii , stone aggregate 20mm 10mm , granular sub base , brick , precast rcc gt slab 550x600mm , paver block , road gully grating , kerb stone of m-25 grade , cement opc 43 grade , flexible median marker , bollard size 950 mm height and 150 mm round m 25 grade , delineator , retro reflective tape

CTN :45264146

26 May, 2026 NA

Mumbai - Maharashtra

Tender For procurement of general material for vehicles of worli garage under ex eng tr city - wd 40 spray (350 ml) electronic contact cleaner (250 ml) rear view mirror welding electric rod (no. 10) welder wire brush retro reflective tape (yellow) 50 mm width retro reflective tape (white) 50 mm width retro reflective tape (red) 50 mm width fan (8 inch) 12 v fan (8 inch) 24 v ms plain washer 1/4" ms plain washer 5 / (16 deg) ms plain washer underline 1 /2^ * bolt with nut full thread 1/4 x 2 bolt with nut full thread 5/16 *1^ prime prime bolt with nut full thread 5/16 *2^ prime prime bolt with nut full thread 3/8 x 1 bolt with nut full thread 3/8x2 bolt with nut full thread 1/4 x 1 bolt with nut full thread 1/2 x 13/4" lt wire 3 mm lt. wire 4 mm lt wire 5 mm lt. wire 6 mm fuse 5 amp fuse 10 amp fuse 15 amp fuse 20 amp fuse 25 amp fuse 30 amp bulb 12 v 67 bulb 12v 1141 bulb 12 v 2441 horn 12 v insulating tape battery lugs battery cable relay head lamp spark plug battery terminal petroleum jelly

Central Government/Public Sector

CTN :45255519

03 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of arrow marker having retro-reflective rectangular sheet made up of 3 mm thick acp sheet face to be fully covered with red color high intensity prismatic type iv grade sheeting (make-3 m/avery dennison or equivalent), size of sheet:- 275mm x 130mm. retro-reflective sheet high intensity grade red with imprinted arrow in white with film thickness of 0.3mm without steel clamp as per drg.no. 19-d-10. make-3m/ avery dennison/or equivalent.note:- 1. make brand is applicable only for retro reflective sheet/tape and numbers. 2. proof of purchase from oem and nabl certificate is required at the time of supply. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45233440

28 May, 2026 1.47 Lacs

Jharsuguda - Odisha

Tender For providing and fixing of necessary items required for fitness of 16 nos of light vehicles running at ilbl ocp, lakhanpur area, mcl - replacement of back light, replacement of head light, replacement of head light bulb, replacement of indicator (front), wiring of back side, wiring of front side, replacement of number plate (front & back), providing & fixing of retro reflective tape, replacement of horn, repairing of driver & co-driver seat, labour charges for above work, total impact of labour cess [@ 1 % (bocw cess to be deducted from the ra bill as per the value of the work progress)] for the purpose of ctc

CTN :45124160

21 May, 2026 45.00 Lacs

Jaipur - Rajasthan

Tender For purchasing work of essential fire safety and rescue equipments - sledge hammer head material: alloy steel handle material: plastic & rubber product dimensions: 80 cms item weight:5 kg. grip type : contoured head style: flat, crow bar made out of carbon steel duly hardened thickness: 20 mm : : 22 mm : : 25 mm : : 28 mm : size: 900mm : : 1200mm: : 1500mm: : 1800mm:, fireman axe certification: - material: - carbon steel voltage test: - 20,000 volt weight: - 1.5-2.5 kg overall length: - up to 2ft handle material: - wood note: a valid product approval certificate for the proposed brand/make, issued to the firemans axe oem, must be attached to the technical bid. bids received without the oems approval certificate will not be considered further and will be disqualified from price-bid opening., fire fighting helmet style: protection, safety isi marked: is: 2925 of 1984 shell material: high density polyethylene (hdpe) strap material: low density polyethylene (ldpe) adjustable chin strap: nylon chinstrap and rachet type head band slot fix design: provision for easy clip on accessories like face shields and earmuffs colour- yellow adjustable and detachable head band., gum boot indian standard for gumboots:is 15298 (part 2): covers safety footwear, including pvc gumboots with steel toes (often referred to in industrial settings for impact resistance) is 5852: refers specifically to protective rubber knee boots (commonly used in mining, construction, and agriculture).steel toe - gumboots / industrial & construction footwear flexisafe isi marked steel toe pvc gumboots, is:5852 certified safety shoes for industrial, agriculture, mining and rainwear use | waterproof, anti-slip, oil resistant., ceiling hook (fire hook) hook: - forged steel handle: - bamboo pole (3 mtrs length) length (approx.): - 3.0 mtrs weight (approx.): - 3.5 kgs, life jacket technical specifications of solas life jackets adult a-1 are as under; solas lifejacket a-1, adult (pfd) is approved by the indian register of shipping (irs) as per latest international solas regulations, with valid certificate weight: 1.000- 1.100 kgs dimensions: length 45 cms x 68 cms x 8cms floatability of above 16.5 kgs comfortable to wear with a shirt like fit. extremely lightweight and slim in design it can be donned in one way only, in a period of 1 minute without assistance, guidance or prior demonstration has heavy duty buckles for fastening has sufficient buoyancy, with 7 pieces of 10mm foam each in the front and 2 pieces of 10mm foam each in the back, to lift the mouth of an unconscious wearer not less than 120mm clear of the water as per latest solas & lsa regulations the materials used for the covers, tapes and seams of the solas lifejacket a-1, adult (pfd) shall be tested as per iso 12402-7, at government approved laboratories to establish that they are rot proof, colour fast and resistant to deterioration from exposure to sunlight and are not unduly affected by seawater, oil, fungal attack and meet all criteria of tensile and strength shows no deterioration after immersion in diesel oil for 24 hours meets the body strength and shoulder strength test prescribed in solas, regulations, wherein a load of 326 & 90kgs respectively are attached for a period of 30 minutes and then there is no physical deterioration in the lifejacket fitted with approved retro reflective tape of 31 at four strategically high places on the lifejacket for immediate and maximum visibility does not sustain burning or continue melting after being totally enveloped in a fire for a period of 2 seconds fixed with a buddy line of 1.5 meters for rescue as per latest specifications a special feature of solas lifejacket a-1, adult (pfd) shall be such that being extremely slim and lightweight can be easily stacked and stored, saving valuable storage space meets solas 74 as amended, reg iii/4. iii/7.1, iii/34, x/3 lsa code, reg.i/1.2 and ii/2.1.1, msc.207(81), imo resolution msc 81(70), msc 200 (80), msc 226(82

Central Government/Public Sector

CTN :45183358

26 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of retro reflective tape (size-50 mm width x 25 mtr. length minimum), colour-yellow, quality- grade-1, type- pressure bonding (r1- p) conforming to is 14221 : 1995 (reaffirmed 2021). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45083521

20 May, 2026 1.92 Lacs

Nagpur - Maharashtra

Tender For purchase of various miscellaneous items for gumgaon mine - pipe wrench - 24" , pipe wrench-18", , ring spanner -7/16"x9/16", , d e spanner 7/16 x 9/16, , grease gun-5 kg, , hydraulic jack - 50 t, , pad lock-50 mm, , pad lock-40 mm, , gi wire-16 swg, measuring tape - 3 m, , grinding wheel 5", , teflon tape - 1/2", , gas cylinder key, , cotton waste, , cutting electrodes -4.00 mm, , oil seal-60x90x13 mm, , cut off wheel 4"x5mmx16mm, , painting brush - 3", , adjustable screw wrench - 12", , de spanner set - 6 to 32 mm, , ring spanner set - 6 to 32 mm, , flat wire brush -2", , tool bit - 3/8"x4", , pvc suction pipe-2-1/2", , araldite-180 gms, , cut off wheel-125x3x22.23 mm, , hss power saw blade-18"x1 1/4", , anabond 666 t plus-100 gms, ms square bar - 50 mm, , tarpaulin - 30"x20", , tarpaulin - 15'x10', , allenkey spanner set - 1-1/2 mm το 10 mm, , allen key set inches, , hacksaw blade -12"x1/2", , combination plier -8", , wonder x-spray, , retro reflective tape red-50 mm, , retro reflective tape yellow -50 mm, , flat file (rough) -12", , round file (rough)-12", , triangular file (fine) - 12", , u clamp - 1/2" (12mm equivalent), , u clamp - 3/4", , u clamp -5/8" (16 mm equivalent), , cut off wheel-350x2.5x25.4mm, , nylon rope - 5/8"

Hylomar Jointing Compound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector