Latest hypalon coating roll Tenders | Government hypalon coating roll Tenders

Central Government/Public Sector

CTN :45737382

15 Jul, 2026 NA

Jaipur - Rajasthan

Tender For supply of non absorable tackers with polymer coating cap with marking (iso) 30 tackers ]

CTN :45738740

21 Jul, 2026 NA

Nilgiris - Tamil Nadu

Tender For water based primer composed of acrilic emulsion polymer (preferable brands dr. fixit roof seal, , single component cold applied elastomeric water proof coating (preferable brands - dr. fixit roof se

CTN :45703781

17 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of upgradation fabrication and refurbishment of conference room with all associated accessories-, slate size: 18 x 18 inches, thickness of slate: 03 mm, slate base: polyfiber, colour: naturally slated teak wood finish, ingredients - recycled rubber crumb and polymer - voramer rr-1009, characteristic-shock absorbent and anti skid, . specific feature: water repellant and scratch resistant, provisioning of over head partition boards for conference room, , aluminum frame paneling for over head structure. area: -288 sq.ft, over head partition boards-288 sq.ft, cooler warm white energized shades with a kelvin range of 2200 k to 6500 k. quantity: 04 nos, moisture absorbent anti odour fragranced overlay coating, temperature control unit with moisture controller and all associated accessories, specifications and performance parameters:, capacity: 2 ton, type of indoor: cassette, voltage/frequency / phase: 380-415v/50 hz/3 phase, compressor type: dual rotary, refrigerant: r 32, -nominal capacity (tr) as per bee: 3 tr, -noise level indoor (high/medium/ low) in db(a): 57.5/53/50.2, - moisture removal (litres/hour): 5.2, cooling capacity (btu/hr): 35997, - ambient temp (cooling)°c: 52°c, 840 x 245 x 840 idu dimension (wxhxd) mm, idu grill dimension (wxhxd) mm: 1020 x 50 x 1020 user interface - lcd remote with night glow function

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

CTN :45628776

22 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh-supply of painting material for external finishing- anti-termite pesticides -(imidacloprid) , cement opc/ppc, , cement - white, , admixture for concrete, , reinforcement steel (thermo-mechanically treated bars (fe 550 d), , alccofine, , mechanical couplers for reinforcement, , ready mix cement concrete, , architecture expansion/seismic joint system, , expansion filler board premoulded compressible (non bituminous), , concrete curing compound, , core cutting, , expanded polystyrene sheet (eps), , soil anchor for diaphragm wall, , pvc water stop, , ready mix polymer jointing cement mortar, , glass brick/glass block, , all type of door lock, floor spring, door closer including mortice locks, , customised door window hardware /joinery fittings, , flush door shutter, , aluminium, , façade and window system, , fire stop in curtain wall system, , pop out vent for façade and system window hardware, , aluminium glass partition system, , aluminium openable louver, , air transfer grill, , fire rated glazed door, , metal fire rated doors, , wooden fire rated doors, , fire rated hardware & system, , fire seal, fire smoke seal, , fire rated glass, , fire rated rolling shutter, , fire curtain, , glass shower partition, , modular toilet cubical, , laminates, , compact laminate sheet, , polysulphide sealant/pu sealant, , glass & mirror, tinted glass,, , high performance glass, reflective glass, lacquered/back painted glass all superior quality, , silicone sealant, , polyester powder coating/pvdf coating, , wired glass, figured/pattern glass, , acoustic seal / door seal, , pvb/sgp laminate film, sentry film, , wood adhesive, , frosted film, , bmu/ façade cleaning system, , dry stone cladding undercut anchor, , stone sealer, , water & stain repellant coating for stone cladding and stone flooring, , gypsum lightweight plaster, , ready mix cement plaster, , crystalline integral, , waterproofing, , water proofing compound, , water proofing membrane (pvc/hdpe)/water, , proofing coating (pu/polyurea/ acrylic/elastomeric cementitious) / sri coating/pitch pu, , water stops - hydrophilic swellable rubber strip (non bentonite type), , polyurethane over deck insulation foam, , food grade epoxy coating for water tank, , vitrified tiles, , tiles/stone fixing adhesive/epoxy grout, , polyurethane concrete flooring, epoxy flooring, self leveling flooring, , wooden flooring and skirting, , raised/false access flooring system, , solid surface (corian), , car deck flooring system, , engineered marble, , rubberized sports flooring (gym flooring), , stainless steel, , structure steel & hollow section-primary producers only, , , , , , access panel in false ceiling system, acoustic panel, aluminium/metal ceilings (baffle and open cell ceiling), aluminum panels, anchor fastener, rebar, chemical/mechanical fastener, expandable fasteners, b, bonded particle board, cement fiber board/ cement, d, dry wall gypsum partition/paneling system for toilet, gypsum wall paneling, , , , , , , grg/gi suspended ceiling grid system & close/ c stud framing system, gypsum ceiling system (plain/perforated),, i c, non shrink cementious precision (anchoring) grout, paint - acrylic emulsion (exterior), paint - anti carbonation paint, paint - plastic emulsion (internal), paint - pu & epoxy paint and primer, paint - synthetic enamel, paint texture paints (interior), plywood (all plywood shall be procured from fully owned factory of the manufacturer and not from jv / outsourced), pu polish for wood work, rock wool/glass wool insulation, , , , , , ss modular railing system, steel (ms) rolled section & plate, steel hollow sections, t, tile trim/threshold, veneer, white cement based putty, soft board, , polycarbonate sheet/skylight, , c, , galvanized/galvalume roofing sheet and accessories d, , pre cast concrete landscape elements, gratings, kerb, drain cover, , preca

Central Government/Public Sector

CTN :45607221

20 Jul, 2026 40.00 Crore

Lucknow - Uttar Pradesh

Tender For supply of surgical consumables - ll, absorbable hemostat (oxidized regenerated cellulose) 4 in.x 8 in. (10 cm x 20 cm), absorbable hemostat (oxidized regenerated cellulose) 2 in x 4 in (5.1cm x 10.2cm), absorbable hemostat (oxidized regenerated cellulose) 2 in. x 3in. (5.1cm x 7.6cm), absorbable hemostat (oxidized regenerated cellulose) 3 in x 4in. (7.6 cm x10.2 cm), absorbable hemostat powder microporous polysaccharide hemosphere in one single sterile pack, absorbable hemostatic gelatin sponge (7cm x 5cm x 1cm), absorbable hemostatic gelatin sponge (8cm x 3cm) anal, absorbable nasal dressing, absorbent mat, access sheath kink resistant ureteral access sheath with hydrophilic coating. flexible, single tapered tip design to reduce trauma to the scope during insertion and dilation, should have radiopaque marker band for fluoroscopic confirmation. single latch hub for single handed operation without rotational alignment. dual durometer dilator to reducer buckling and facilitate placement in tortuous ureters. length of the access sheath should be 28cm/36cm/46cm. should be available in size 11/13, 12/14, 13/15., accessories (tubings, humidifier chamber, nasal prongs) for resipicare high flow nasal oxygen therapy adult and pediatric, accessories compatible for probes of mindray monitor (i) lncs disposable probes (ii)ecg cable (iii) spo2 extension (iv) masimo probe (v) ibp cable with transducer (v) etco2 sample line (vi) eeg cup electrode (vii) temprature probe (viii) nibp hose (ix)nibp cuff (x) battery., acd solution bag 500 ml, acrylic powder (for cranioplasty), acrylic repair material, active life bag with clip, active life one piece drainable cut to fit pouch with stomahesive skin barrier with one sided comfort panel & tape collar-19mm to 64mm, adhesive felt pad 5x5cm, 10x10cm, adhesive remover spray consists hexamethyldisiloxane and cyclonentasiloxane silicone polymer for easy removal of the base plate. alcohol and sting free. neutralize odour with lemon grass formulation., adhesive silk tape all sizes, adhesive suture less securement device for stabilization of vascular access devices. the devices should have a sliding post retainer and a pigtail clip for holding the catheter lumen and should be sterile latex-free, non-absorbent with breathable pads., adhesive tape (silk based cloth) 3", adhesive tape cloth 3" , 100mm linear cutter blue cartridge/ reload for 1.5mm closed staple height enabled with 3d staple and tissue gripping technology to stabilize the tissue with anti tissue slippage groves, compatible with stapler which has curved anvil and locked halves, 100mm linear cutter green cartridge/ reload for 2mm closed staple height enabled with 3d staple and tissue gripping technology to stabilize the tissue with anti tissue slippage groves, compatible with stapler which has curved anvil and locked halves, 2-octyl cyanoacrylate 0.5 ml quantity for skin closure up to 15 cm incision., 3d acetabular shell, 4mm cutting drill compatible with spine endoscopy drill system, 4mm diamond drill burr compatible with spine endoscopy drill system, 5mm laparoscopic shear with 15mm curved coated blade, 360 degree rotation, capable of cutting, sealing, grasping, and coagulating blood vessel upto and including 7mm in diameter, having advance hemostasis mode and compatible with generator installed in institute through tender process, available in sizes 23cm, 36 cm, 45cm, with the next-generation adaptive tissue technology algorithm, improved pad life, and improved temperature management for enhanced tissue protection., 5mm laparoscopic shear with 18mm curved coated blade, 360 degree rotation, capable of cutting, sealing, grasping and coagulating blood vessels upto and including 7mm in diameter, with integrated transducer, having advance hemostasis mode and compatible with generator installed in institute available in sizes 36 cm, 20 cm compatible with generator installed in the institute., 60mm linear cutter blue cartridge/ reload for 1.5mm cl

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

Central Government / Public Sector

CTN :45560874

13 Jul, 2026 NA

Secunderabad - Telangana

Tender For hq_med_cath_gte_zrc_zonal rate contract for supply of ph no:.(158300) ptca guide wire, tip load 0.6gf, tip radiopaque length 16cm, spring coil length 16cm, polymer sleeve with slip coat (hydrophilic coating) 17cm, 0.014 inch guide wire with distally tampered tip of 3cms of diameter 0.01 inch (0.26mm), composite core construction with multiple wire components comprising of rope coil ]

Central Government/Public Sector

CTN :45550753

17 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of dining table with six seating capacity, heavy teck wood structure with six heavy duty chairs with cushion, handle supported. marble top or glass top 25mm thickness. product name: heavy-duty steel frame recreation chair with stretcher. 1. structural frame: the main structure must be constructed from heavy-duty crca (cold rolled close annealed) steel tubing (minimum 25mm diameter and 1.2mm wall thickness). the design must incorporate a steel stretcher (horizontal reinforcement bar) between the legs for enhanced structural stability and to prevent frame spreading under heavy loads. 2. support & armrests: integrated handle support (fixed armrests) made of steel or high-impact polymer, designed for ergonomic comfort and securely fastened to the main frame. 3. cushioning & upholstery: > * seat & back: must feature high-density, high-resilience molded pu foam (minimum density 32 kg/m? for back and 40 kg/m? for seat) to prevent sagging over time. tapestry: upholstered in premium-grade, breathable heavy-duty fabric or high-quality pvc leatherette with high abrasion resistance (martindale test > 30,000 rubs). 4. finish: all metal parts must be treated with an anti-corrosive, 7-tank phosphating process followed by an epoxy powder coating (minimum thickness 50?60 microns) for a scratch-resistant and rust-proof finish. highest; known for strict gauge standards.excellent; premium finish and aesthetics. best value for high-volume use.foam quality, molded pu (long life).,thick cushioning; soft feel. high-density resilient foam. weight capacity: if not specified in the description, add a clause: "the chair must safely support a static load of minimum 130 kg." would you like me to adjust the "estimated rate" for your requisition based on the current market price for these brands make: godrej, nilkamal or or similar [ warrantyperiod: 24 months after the date of delivery ] ]

State Government

CTN :45519504

22 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For procurement of waterproofing material for treatment at shakti bhawan mppmcl jabalpur - providing of acrylic polymer waterproofing material of pidilite/ cico/ mymix/ arda/ approved equivalent make (20 kg each bucket), providing of black liquid waterproofing compound of pidilite/ cico/ mymix/arda/ approved equivalent make (20 kg each bucket), providing of roof coat wh 700 white liquid waterproofing compound of pidilite/ cico/ mymix/ arda/ approved equivalent make (20 kg each bucket), providing of fiber net 45 gsm (each roll of 1m*50m), providing of pu sealant of pidilite/ cico/ mymix/ arda/ approved equivalent make (600ml each pack), providing of silicone based water repellent for exterior coating of pidilite/ cico/ mymix/ approved equivalent make (10 lt each bucket), providing of silicone sealant of pidilite/ sika/ loctite/ approved equivalent make (280 ml each pack)

Hypalon Coating Roll Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

State Government