Get complete information related to latest Hysd Bar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hysd Bar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hysd Bar Tenders.
Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysdbars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysdbars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm
Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysdbars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysdbars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket
Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned heavy melting items such as hook draw bar screw coupling parts , control arms and lower and upper cover traction centre ,coupler cutting parts such as side bearer assembly, yoke , front plate bearing plate, rear plate , align screw, leaf spring ,carrier assemble and scrap tm m.s items such as t m rotor parts, rotor core lamination ,end sheild , m s pinion , transmeter wheels ,msu ,leg chain string , alternator shaft,casing blower casing,front chember,piston,plate,oil pump part,darft gear, pinion,heavy loco parts,tsc exhaust chamber parts,liner,cbc housing casing, power assembly parts ,head ,joints,knucles, roll bar link,gear case cover , con rod knuckle bc parts , dv parts ,caliber & cylinder, plunger,and other types of coupling and heavy melting items etc. in dismenteled and broken condition. scrap items with or without minor nf/ss, rubber etc attachments etc (qty approx).
Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf gslrd coaches 4 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following 9 reclaimable mechanical rc items common to all 4 coaches - 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors -6 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributor valve complete full set 1 set, 8], cut off angle cock- 4 nos, 9] dirt collector- 2 nos.. 1} coach no. special repair gslrd 056750 (year built 2005), ds-8 no. 334706 dt 02.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 15 nos, 6] 2w led lamp 4 nos, 7] 5 w led lamp 4 nos 8] side lamp 2 nos 9] tail lamp 2 nos 10] toggle switch 17 nos 11] rotary switch with panel board- 1 no 12] v belt- 4 nos, 13] axle pulley- 1 no 14] alternator to regulator copper wire- 1 kg. 2} coach no. special repair gslrd 051121 (year built 2005), ds-8 no. 334707 dt 21.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 14 nos, 6] 5 w led lamp 4 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 2 nos 15] vrla battery - 19 nos, 16] battery tray 4 nos..3} coach no. ner gslrd 073723 (year built 2007), ds-8 no. 334712 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 1 no 15] vrla battery - 19 nos, 16] battery tray 4 nos. 17] luggage light 4 nos ..4) coach no. nr gslrd 064925 (year built 2006), ds-8 no. 334713 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] switches 15] emergency lamp unit- 2 nos 16] vrla battery - 19 nos, 17] battery tray 4 nos. 18] luggage light 4 nos...custodian sse/ c&w/ shoranur. location: 3 coaches stabled at ioh shed premises/ shoranur coach no 051121 presently available at road no 12 shoranur yard, it is to be shifted to ioh shed siding for cutting/delivery by the custodian.
Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) distributor valve complete set, 2) buffer plunger with buffer casing complete set, 3) screw coupling with draw bar hook complete set, 4) aluminium water tanks . coach nos.- 1) kr/swr gslr 97763, 2) nr gslrd 044728 ,3) wr gslr 997191, = 3coaches, ds8 no: 232867,dt 08.09.2025, pl.no.98111061, location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2) all rc items should be handed over to custodian at respective locations . 3)bio toilets should be defaced before delivery.4)rate per number should be quoted , 5)coaches are in grounded condition(bogies and wheel sets are removed). 6)cutting permitted to loadable sizes only. 7) crane loading may be permitted. 8) purchaser should take safety precaution while cutting/delivery of wagons. 9) rate per number should be quoted.
Tender For supply of various items required for implementation of mgnregs & vb-g ram g - 1st class picked jhama bricks(traditional) , stone boulder 225 mm above) , stone boulder (225mm-150mm) , laterite boulder , fine sand , medium sand , coarse sand , bamboo (8cm-10cm diaj including fixing , eucalyptus bullah (7.5cm-10cm dia) , eucalyptus bullah (12.5cm-15cm dia) , eucalyptus bullah (17.5cm-20cm dia) , sal bullah (7.5cm-10cm dia) , sal bullah (12.5cm-15cm dia) , sal bullah (17.5cm-20cm dia) , nail , hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings , hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings , hire charges of 5 kva generator , hire charges of 3 kva generator , hire charges of monkey set , loading unloading & stacking sand/stone aggregate (less than 40mm nominal size) , loading unloading & stacking stone aggregate (above 40mm nominal size) , loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material , stone screening type a (13.2 mm) , stone screening type b (11.2mm) , 1st class traditional bricks (kiln burnt) , loading, unloading & stacking by manual means (r.c.c. pipes, c.1. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia , loading, unloading & stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced cement pipes) 900 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia , sausage wire net , wood dust , tor steel rods/hysdbars/tmt bars , (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysdbars/tmt , bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ss l)(fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysdbars/tmt bars (other than sail/tata/rini/jsw/jspl/shyam/srmb/bmasl/elec rosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786) , loading, unloading and stacking by manual means of , steel , neem wood , other local wood , sisu/gamar wood , local sal wood , bright finished or black enamelled mild steel screws , 40 mm , bright finished or black enamelled mild steel screws , 20 mm , bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm. , bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm. , bright finished or black enameled mild steel butt , hinges 100x58x 1.90 mm , coal tarring , fan hook , r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area , udaypur marble slab (for floor, lobby etc) 18 mm. thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m , udaypur marble slab (for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for wall/dado) 18 mm. thick of size 0.3 sq m to 0.6 sq m , frp composite door frame 66mm x 70mm. , frp composite door frame 66mm x 90mm , coloured pedestal type w.c. pan 580x440 mm , 32 mm dia polythene flush pipe , 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble) , gl pipe 32 mm dia medium quality for underground works , gl pipe 40 mm dia medium quality for underground works , cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia) (for concealed work) , thermocol 12.5 mm thick. , chromium plated stop cock (equivalent to code no. 513(a) & 513(8) & model - tropical/sumthing special of essco or similar brand). , chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model - flore
Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysdbars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysdbars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysdbars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a
Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalizing stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxy. cut ferrous ball bearing, miscellaneousellaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar ,ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousellaneous ferrous items etc. as available in the lot, except any non ferrous. qty-150mt. location-east of vm road in ncb- 08.
Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81039019379 bwta (2) nr 81039019096 bwta (3)cr 81018560175 bwta (4)nr 81039019331 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(79.120 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(79.120 mts) on approx basis , advice note no.25-03385 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot