Latest illumination system Tenders | Government illumination system Tenders

Central Government/Public Sector

CTN :41711038

06 Dec, 2025 NA

Raigarh - Chhattisgarh

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : supply of design, engineering, supply of illumination system as per technical specs and terms and conditions , receipt, storage, security, local transportation, erection, testing, commissioning of illumination system

State Government

CTN :42746084

05 Jan, 2026 NA

Parganas - West Bengal

Tender For corrigendum : revamping of existing illumination system of matla bridge with approach road at canning south 24 pgs - revamping of existing illumination system of matla bridge with approach road at canning, south 24 pgs.

State Government

CTN :43028668

11 Dec, 2025 13.63 Lacs

Mysore - Karnataka

Tender For supplying, fixing, wiring, servicing & maintaining of different type of decorative lighting/illumination system on hire basis for flower show festivities-2025 at mysuru palace, mysuru

CTN :43033449

09 Dec, 2025 5.72 Lacs

Fatehabad - Haryana

Tender For : installation of illumination system in mc uklana

CTN :43017790

08 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of various illumination systems for use during emergency repair and maintenance works of water mains under dy.he(maint) section. tender id :- 2025_mcgm_1253218.

State Government

CTN :42886835

04 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : provision of bpac and double distant signal in badnera chandur bazaar section on bhusawal division - schedule (a) -provision of bpac & double distant signal in bd-cndb section on bhusawal division., supply of relay rack assembly complete with scaffolding, fixtures and accessories including ms bars for fixing of relay plug board, string rods, fuse strips with bracket, 11 way bus bars with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. siemens type & as per extant practice on c. rly. typical part list and rack arrangement as per sketch no sk-727 and rack plan as approved by engineer incharge. (inspection by consignee), supply of tag blocks 200 / 160/120 way with polycarbonate cover as per irs s 77-2006 (rev 1 ) rdso drg. no sa 24751, sa 24752 & sa 24753 requirement of each type shall be specified by engineer incharge .(inspection by rdso), supply of main cable termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks, ladder, string rods, frame, base assembly, insulators, j bolt, nut/bolts & fasteners, backelite sheet, etc. siemens type and as per extant practice on central railway. typical part list and rack arrangement shall be as per sketch no. sk-727 with latest alterations. (inspection by consignee), supply of pvc indoor cable 1x60x0.6mm dia colour coding of insulation of inner core shall be in six colour viz blue , red , grey ,green, brown and black conforming to irs 76/89(amdt 3) or latest. (inspection by rites), supply of pvc indoor cable 1x 40x0.6mm dia. colour coding of insulation of inner core shall be in eight colour viz blue, red, grey, green, brown, black, yellow & white. conforming to irs 76/89 (amdt 3) or latest. (inspection by rites), supply of pvc indoor cable 1 x 24 x 1 mm dia. colour coding of insulation of inner conductor shall be in eight colour viz blue,red,grey,green,brown,black, yellow & white.conforming to irs 76/89 (amdt 3) or latest. (inspection by rites), supply of indoor jumper wire of various colour as per railways standard practice of type atc 1 x 0.6 mm dia. conforming to irs 76/89 (amdt 3) or latest.(inspection by consignee), supply of indoor jumper wire atc 1 x 1 mm dia. conforming to irs 76/89 (amdt 3) or latest. (inspection by consignee), supply of pvc flexible copper cable, single core, multi strand 1x2.5 sq mm(50 conductor each dia 0.25 + /- 0.01) as per specn is 694/2010 with latest amendment. if any with insulation thickness of 0.70 mm nominal conductor resistance 7.98 ohms /km and test parameters are as per irs (s)76/89 (amdt .3). (inspection by consignee), supply of pvc flexible copper cable, single core, multi strand 1x10 sq mm(80 conductor each dia 0.40 + /- 0.01) as per specn is 694/2010 with latest amendment. if any with insulation thickness of 1.00 mm nominal conductor resistance 1.91 ohms /km and test parameters are as per irs (s)76/89 (amdt .3). (inspection by rites), supply of wire 16/0.2(blue,red,gray,yellow,brown,black,white as per site engineer instruction)finolex/polycab/delton make.irs:s-76/89(amd.3),bs:4808 part-2.wire to be procured from rdso approved vendor (inspection by consignee), supply of transformer 230v/110v-130v single phase 1 kva as per spec. irs s-72/88 (amd.2) with latest amendments. (inspection by rdso), supply of transformers rectifier unit 110v ac/24v dc 500ma as per specn.no.cr/s&t/91-12. (inspection by rdso), supply of battery charger self regulating floor mounting type with 230 v ac single phase input and output 24v dc, 30a as per spec. irs.s.86/2000 (amd.1) with latest amendments for axle counter applications (amd.4). (inspection by rdso), supply of automatic changeover for individual supply automatic changeover unit of signal/track/dc circuit supply of 32a, ac/dc consisting of 3tc 44 contactors, led lamp,push button, terminals,vsr,polarity switches. as per rly.drg-sk-841/1-5 for ips supply to mannual discrete e

CTN :42901829

09 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipments - purchase of equipment, bench top glass insitu airlift photo bioreactor1. vessel capacity: 3 liter borosilicate glass (working volume: two to three liters maximum), vessel hxd ratio 4:1 (400x100mm)2. head plate & bottom plate moc: ss 316l3. ports in top plate: ph sensor; dissolved oxygen (do) sensor; pressure sensor; air in and draft tube; air out; acid/base; sampling; and addition port.4. mixing method: ring sparger to create airlift circulation inside the reactor for uniform mixing and better aeration.5. holders for sensor /adapter / blind stoppers in head plate: ph sensor holder; media double inlet for acid/base dosing; air sparger - ring type for airlift application without stirring, air out with exhaust filter and open/close valve; pressure sensor holder; sampling pipe; blind stopper for un used port; unique suitable ss puncturing needles for sampling, air in, air out, inoculum, feed addition.6. ports in bottom plate with stand: port for temperature sensor; heating finger u-tube heat exchanger; drain.7. holders for sensor / adapter / blind stoppers in bottom plate: holder for temperature sensor, heating finger, u-tube heat exchanger.8. sensors: temperature, gel filled sterilizable ph sensor, & pressure sensor.9. controls and display: modular independent system of ph, temperature, pressure with touch screen graphical display & control; two set point control of ph with three-point buffer auto calibration; aeration by flow meter 0-5lpm with air pump; sterilization controls up to 121 without steam generator along with pressure safety mechanism by independent pressure sensor and digital display & control; automatic digital pressure safety and over temperature safety cutoff and alarm; upgradable control system for future prospective as cstr reactor & dissolved oxygen (do).10. measurement and control range: ph: 2-14; process temperature: 20 to 60 ; sterilization temperature: up to 121 ; and pressure up to 15 psi.11. fixed speed peristaltic pump: for acid/base dosing with teflon non spring head. (2 nos)12. cooling system: chiller cum circulator. chiller temperature range 4 to 40 , bath capacity 5l to cool down the reactor after sterilization and to work process temperature below ambient condition.13. illumination system: two illumination assembly with variable intensity control (1000-3000 lux) around the reactor with independent control switch for photobioreactor, or other application and easy detachable if not in use. 14. essential accessories : silicon tubing for acid/base addition (10m); air in and sampling (10m); water circulation (5m); air vent filters 0.2 micron sterilizable (6nos); and silicon septum (25nos)15. starter kit: spare silicon-o-rings for head plate, bottom plate (1no each), all other ports (5nos each), alen key.16. warranty: one year17. support (must): unconditional onsite technical support shall be provided as and when needed. the supplier must provide complete installation and hands-on demonstration of the equipment at the user site upon delivery.18. the vendor should have a registered presence in india with an authorized local service provider in tamil nadu.

CTN :42532947

08 Dec, 2025 NA

Anpara - Uttar Pradesh

Tender For corrigendum : supply of design, engineering, supply of illumination system as per technical specification , erection, testing and commissioning of illumination package as per technical specification

CTN :42985467

08 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of various illumination systems for use during emergency repair and maintenance works of water mains under dyhemaint section

State Government

CTN :42980267

11 Dec, 2025 4.11 Lacs

Parganas - West Bengal

Tender For repairing and overhauling of actuator gear box of butterfly valve, replacing of old damaged ac, restoration of illumination system and repairing of entrance gate of raw water pumping station at glasskol ghat, titagarh under titagarh municipality.

Illumination System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government