Latest illuminator Tenders | Government illuminator Tenders

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Corporations And Associations And Others

CTN :45723486

08 Jul, 2026 5.01 Lacs

Delhi - Delhi

Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 140 inderpuri under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity as required., supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

CTN :45724100

13 Jul, 2026 NA

Multi City - Multi State

Tender For supply, installation and commissioning of digital measuring microscope with goose neck microscope illuminator.

CTN :45727213

09 Jul, 2026 NA

Jalandhar - Punjab

Tender For supply of led x - ray illuminator (v2) (q2)

CTN :45686753

06 Jul, 2026 15.00 Lacs

Bundi - Rajasthan

Tender For purchase of xray and radiologoy items - part -a, developear powder to make 22.5 ltr., developear powder to make 13.5 ltr., fixer powder to make 22.5 ltr., fixer powder to make 13.5 ltr., fuji medical dry imaging flim d1-hlsizes 8"x10", fuji medical dry imaging flim d1-hlsizes 10"x12", fuji medical dry imaging flim d1-hlsizes 11"x14", fuji medical dry imaging flim d1-hlsizes 14"x17", usg gel 250 ml, dental intraoral x-ray film size 2, sono print roll type 1 normal, x ray cassettes size 12"x15" cassettes single side lock, x ray cassettes size 10"x12" cassettes single side lock, x ray cassettes size 8"x10" cassettes single side lock, x ray cassettes size 14"x17" cassettes single side lock, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 35.4 x 43 cmie, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 35.4 x 35.4cmie, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 25.2 x 30.3 cmie, ip cassette for fuji crfuji ip cassette . ip cass cc bwpb 20.1 x 25.2 cmie, 12"x15"intesifying screen blue sensitve, 10"x12"intesifying screen blue sensitve, 8"x10"intesifying screen blue sensitve, 14"x17"intesifying screen blue sensitve, fuji imaging plate ip -6 st 35.4 x 43 cmie, fuji imaging plate ip -6 st 35.4 x 35.4cmie, fuji imaging plate ip -6 st 25.2 x 30.3 cmie, fuji imaging plate ip -6 st 20.1 x 25.2 cmie, hangers stainless steel size 12"x15", hangers stainless steel size 10"x12", hangers stainless steel size 8"x10", hangers stainless steel size 14"x17", processing tanks 22.5ltr stainless steel, safe light with filter, led apron 0.25 mm to 0.5 mm lead size medium, led later 0 - 9 big size, led later r&l big size, x-ray protecion mobile screen, cassette pass box metal four door type 24" x 24" x 20" d, x- ray clip big size stainless steel, cassatte holder l/r metal marker, lead hand gloves big size, lead sheet 14"x17", lead divider 17"x7", lead divider 15"x6", lead divider 12"x5", illuminator view box 14"x17", lead spects, chest stand head to toe, lead barrier 3 fold, medical dry film for dry printer 08"x10", medical dry film for dry printer10"x12", medical dry film for dry printer11"x14", medical grade ink for dry printer

Central Government/Public Sector

CTN :45678963

15 Jul, 2026 NA

Gurgaon - Haryana

Tender For laser & ir illuminator

CTN :45648834

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For supply of low noise amplifier , band pass filter module , 24 bit adc module , stm32 dsp board , sd card data logger , waterproof enclosure , battery and charger , signal conditioning unit , raspberry pi , high speed adc , gps module , lora lte module , solar panel and charger , marine enclosure , escs , imu and depth sensor , misc wiring mechanics , gnss module , power distribution board , lna , gnss navic receiver , cables and rf parts , microcontroller , battery pack , heat sink and cooling , enclosure , energy meter ic , ct and pt sensors , wesp32 , lcd display , relay module , wifi gsm module , power supply , camera hd , traffic light modules , ir illuminator , temperature sensors , vibration sensor , current sensor , esp32 stm32 , gsm lte module

CTN :45407858

27 Jun, 2026 1.72 Crore

Kanchipuram - Tamil Nadu

Tender For corrigendum : supply of cctv camera , camera housing , bird spike , pole , ir illuminator , nvr , hdd , monitor , wall mounting stand , work station , poe switch , media convertor , sf module , liu , patch cord , rack , rod , cable , power cable , armoured power cable , ups , ofc , splicing charges , splicing cylender , hdpe pipe , pvc pipe , gang box , electrical accessories , db box , wireless mouse , hdmi cable , extender , uextender , laying , diging and refilling , route marker , licence and software , cahrge

Central Government/Public Sector

CTN :45346322

29 Jun, 2026 6.10 Lacs

Jalandhar - Punjab

Tender For bid to ras supply of slotting saw cutter size 0.8 by 75 by 25.4 mm , slotting saw cutter size 1.5 by 75 by 25.4 mm , slotting saw cutter size 1.2 by 75 by 25.4 mm , slotting saw cutter size 1 by 75 by 25.4 mm , angular cutter 45 degree both side , angular cutter 60 degree both side , t slot cutter size 6 by 10 by 2 shank by dia by width , t slot cutter size 12 by 28 by 10 shank by dia by width , t slot cutter size 12 by 18 by 8 shank by dia by width , milling vice swable base standard size , end mill cutter 30 mm , tap size 7 by 32 into 56 tpi , die size 7 by 32 into 56 tpi , tap size 6 into 1 mm pitch , tap 4.8 into 32 tpi , ring spanner set stanley set 12 pieces , taparia socket set 8 mm to 32 mm ratchet handle goti set , breeze deluxe 450 mm hand leaver shearing machine b4ds18 , angle grinder bosch 4 inch gws 800 , tong smith 18 inch shandasi , wire cutter 8 inch , holder arc welding machine 800 a , impact screw driver set taparia , digital micrometer mitutoyo 0 to 25 mm , gas welding torch big esab , oxygen gas regulator two stage esab , d a gas regulator two stages , digital multimeter , glue gun 200 watts , screw driver 10 inch taparia two way , screw driver 04 inch taparia two way , die handle 21 mm inner dia , tap handle 08 inch , thread gauge in inches mitutoyo , thread gauge in millimeter mitutoyo , center drill 01 mm , center drill 1.5 mm , center drill 02 mm , drill bit 4.5 mm , drill bit 5.2 mm , drill bit 5.3 mm , drill bit 5.50 mm , drill bit 03 mm , drill bit 5.7 mm , tap 5 into 0.8 mm pitch , tap 4 into 0.7 mm pitch , die 6 into 1 mm , cardless electric screw driver with r by f function led light and 43 pcs accessories 240 rpm , drill chuck with key and arbor mt 2 shank 1 to 13 mm capacity heavy duty , hss toll bit 1 by 2 into 4 inch , cutting blade 14 inch bosch , cutting blade 04 inch bosch , grinding wheel 04 inch bosch , emery paper no 80 roll , vernier caliper bty 3 v lithium coin , power hacksaw blade 400 into 32 into 1.6 mm , hacksaw blade 24 tpi , hacksaw blade 32 tpi , mini hacksaw blade , file handle plastic , grinding wheel 10 inch rough , grinding wheel 10 inch smooth , diamond dresser grinding wheel , hss tool bit 1 by 2 into 6 inch miranda , hss tool bit 1 into 8 inch miranda , hss tool bit 5 by 16 into 6 inch miranda , hss tool bit 1 by 4 into 4 inch miranda , locktite 495 , lifeboy shop , duco thinner , shalimar normal thinner , squirrel hair mop brush , d battery 1.5 v , white paint 100 gm pack , red paint 100 gm pack , kerosene oil , gas mask , bulb 60 watts , machine cleaning brush 02 inch , painting brush 02 inch , painting bruch 01 inch , emery paper no 220 roll , thinner trisul 01 ltr pack , asian paint white 01 ltr pack , asian paint og 01 ltr pack , asian paint black 01 ltr pack , red oxide primer 01 ltr pack , cotton waste , welding rod no. - 10 esab , gas lighter welding works , illuminator 20 watts , soap hand wash , goggles for grinding machine , total auto darking welding goggle tsp 9403 , gas hose pipe 08 mm wp 15 kg blue , gas hose pipe 08 mm wp 15 kg red , brass brazing rod 1 by 16 inch , plastic container 01 ltrs capacity , file cord wire brush small , pencil cell aa battery , remote cell aaa battery , file flat bastard 12 inch , file flat bastard 10 inch , file flat smooth 10 inch , file half smooth 8 inch , file flat bastard 8 inch , file flat smooth 8 inch , needle file set 12 pcs set , file flat bastard 6 inch , file flat smooth 6 inch , file flat bastard 4 inch , file triangular smooth 6 inch , file half round bastard 8 inch , file round bastard 10 inch , file diamond flat 6 inch , file triangular diamond 6 inch , allen key set 1.5 to 12 mm , lever oil can heavy duty //bid details 2 / 69 lever oil can heavy duty

CTN :45610608

09 Jul, 2026 NA

Kanker - Chhattisgarh

Tender For supply of microscopes - pathological and research as per is 4381, is 5204, is 4381, is 5204 (q3) , stereo microscope (v1) (q2) , ph meters of wide range digital , bottle dispensers , vortex mixers , hot air oven , semi autoanalyser , boiling water baths , analytical balance , weighing machine adult , baby weighing machine , height measuring stand , autoclave - type 1 , bp apparatus digital , vaccine carrier , glucometer , autoclave- type 2 , incubator electric , lab refrigerator minimum 400 litres , electric weighing machine for organs or fetus , mortuary cabinet , led x-ray illuminator double panel , insect control traps , vernier caliper , multifunctional adult iv training arm model , centrifuge

Illuminator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector