Web Analytics Made Easy - StatCounter

Impact Roller Tenders

Get complete information related to latest Impact Roller Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Impact Roller Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Impact Roller Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45696572 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

corporations/Associations/Others

CTN :45676412 Due date: 02 Jul, 202602 Jul, 2026 7.71 Crore
Tender For centralized rate contract for two years for supply of various types of spare parts of ms elecon engg. company limited for chp of different plants of dvc. - dowel, part no.-30, type: k2 gear unit, make: elecon engg. co. ltd., drain plug, part no.-45, type: k2 gear unit, make: elecon engg. co. ltd., breather plug, part no.-56, type: k2 gear unit, make: elecon engg. co. ltd., input pinion shaft, part no.-102, type: k2 gear unit, make: elecon engg. co. ltd., input extension key, part no.-107, type: k2 gear unit, make: elecon engg. co. ltd., locknut, part no.-110, type: k2 gear unit, make: elecon engg. co. ltd., lock washer, part no.-111, type: k2 gear unit, make: elecon engg. co. ltd., flanged bush, part no.-120, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-132, type: k2 gear unit, make: elecon engg. co. ltd., output shaft, part no.-202, type: k2 gear unit, make: elecon engg. co. ltd., output gear, part no.-203, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-206, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-232, type: k2 gear unit, make: elecon engg. co. ltd., intermediate pinion shaft, part no.-302, type: k2 gear unit, make: elecon engg. co. ltd., intermediate gear, part no.-303, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-306, type: k2 gear unit, make: elecon engg. co. ltd., roller assembly r-800 drg no- r00673/3, for paddle feeder m/c no. 27-30, make-elecon, roller assembly r-600 drg no- r00686/3 , for paddle feeder m/c no.-27-30,make-elecon, geared coupling ed500, propeller shaft series 1600mm part-m08244/1 for paddle feeder m/c no- 27-30, make-elecon, paddle shaft 88diax477 lg part-m13004/4 for paddle feeder m/c. no.-27-30, make-elecon, paddle shaft 88diax812lg part-m13006/4 for faddle feeder m/c no.-20-30, make elecon, coupling for propeller shaft part-m13005/4 for paddle feeder m/c no.- 27-30, make elecon, wheel drive parto-m11031/3 for paddle feeder m/c no. pf-27-30 , make - elecon, keeper plate part-m08596/4 for paddle feeder m/c no.- 27-30, make - elecon, spacer for bearing 89.8/80diax27thk for paddle feeder m/c no- 27-30, make -elecon, cover for bearing 130diax14 thk for paddle feeder m/c no. 27-30, make-elecon, plain wheel dia 160/90x85thk for paddle feeder m/c no.- 27-30, make - elecon, spindle 40 diax210lg part-m08594/4 for paddle feeder m/c no.- 27-30, make - elecon, deep groove ball bearing single row , part no.- m08593/3 for paddle feeder m/c no.- 27-30, make -elecon, filter return line for hydraulic system of paddle feeder pressure relief valve for hydraulic system of paddle feeder, spring, drg. no. m02728/4spare for vibrating feeder,spring, drg. no. m02728/4spare for vibrating feeder, paddle hub with arm, part no. m08456/2 (spares for paddle feeder plough drive assembly of elecon make paddle feeder, m/c no. pf: 27-30), locking plate(spare for paddle drive assy.), locking assy. d0b1kon1012140x190 for paddle drive assy., ci cast housing for extra bearing housing (spare for paddle drive assy. of paddle feeder), spacer 75 od x 55 id x 48 lg (for paddle drive assy.), spacer part no. m13062/4(for travel drive assy.), torque arm for travel drive, spacer part no. m13007/4(for travel drive assy.), boss p no. dc0269414, deep groove type ball bearing (for spacer for d.s. trolley), nylon ring 3thk 125od x80 id for spare of ds trolly assy., pin 80 dia x 235 lg(spare for ds trolly assy.), cover 20/80 dia x 20 thick(spare for ds trolly assy), wheel dia 315 mm(spare for ds trolly assy.), drive gear box (type-c082111)make;pbl without electric motor for ilms, planetary gearbox input sun pinion for elecon make planetary gear box type and size pav 45 ratio-5:1, planetary gearbox set of oil seal for elecon make planetary gear box type and size pav 45 ratio-5:1, annulus (part no.5), of planetary gearbox type:pav-45, ref drg no.7741891/3, planet bolt (part no.8) of planetary gearbox type:pav-45, ref drg no.7741891/3, planet carrier cum output shaft(part n

CTN :45697950 Due date: 06 Jul, 202606 Jul, 2026 14.38 Lacs
Tender For spares parts for stone crusher abhishek 20 tph em no 21l 39014 of 122 rcc - jcap a02 22 54 pitmen bearing 22238 , jcap a02 28 60 bkt seal gland 10x10 , jcap a02 29 61 bkt cover seal o ring dia 5mm , jcap a02 30 62 pitmen cover o ring dia 5mm , jcap a02 16 48 bkt bearing , jcap a02 21 53 cam shaft , jcap a02 23 55 pitmen outer cover , jcap a02 09 41 balancing weight , jcab a01 005 5 toggle bearing , jcap a02 24 56 pitmen outer cover bolt , 10005607 air filter inner , 10005606 air filter outer , jcab a01 003 3 side plate , jcab a01 004 4 toggle plate , jcab a01 0055 toggle bearing , jcap a02 03 35 swing jaw plate bolt , jcap a02 04 36 swing jaw plate nut , cua 500a12 11 202 bearing , cua 5001a2 15 206 carrier roller std , cua 500a12 17 208 impact roller , cua 500a12 18 209 carrying roller , cua 500a12 24 215 return roller , jcab a01 000 7 toggle bolt , sba a09 15 148 wire mesh 40mm deck 1 , sba a09 16 149 wire mesh 20mm deck 2 , sba a09 17 150 wire mesh 10mm deck 3 , cua 650 a13 13 250 draw bar bolt adjuster screw , jacb a01 006 6 toggle block , jcap a02 02 34 swing jaw plate , jcap a01 002 2 fixed jaw plate , cua650 a13 02 239 main conveyor belt

CTN :45655818 Due date: 06 Jul, 202606 Jul, 2026 NA
Tender For belts conveyor rollers spares > - belt conveyor rollers & spares, chain spair store a/c}idler roller 465mmx4" roller shaft size 25mm(sp0083)shaft length 535 mm, side bearing lebranth seal give properly, {chain spair store a/c}idler roller 470mmx4" roller shaft size 20mm(sp0089)shaft length 540 mm, side bearing lebranth seal give properly, {mill house spare store a/c}idler roller 565mmx5" roller shaft size 25mm(sp0104)shaft length 635 mm, side bearinglebranth seal give properly, {chain spair store a/c}impact roller 290mmx4" roller shaft size 20mm(sp0093)shaft length 360 mm, side bearing lebranth seal give properly, chain spair store a/c}return roller (rbc)1700mmx5" roller shaft size 25mm(sp0074)shaft length 1770 mm, side bearing lebranth seal give properly, {chain spair store a/c}roller 1050mmx4" roller shaft size 25mm(sp0088)shaft length 1120 mm, side bearing lebranth seal give properly, {chain spair store a/c}roller bc1&bc2 1400mmx4" roller shaft size 25mm(sp0081)shaft length 1470 mm, side bearing lebranth seal give properly (487)

corporations/Associations/Others

CTN :44752585 Due date: 26 Jun, 202626 Jun, 2026 NA
Tender For bid to ras bid to ras corrigendum : tender for supply of carrier roller 900 mm belt , roller , impact , roller rtn900 mm belt , roller , return , v for 900mm belt width , roller garld 5 roll assy900 mm , 35 deg. carrier frame , sa carrier frame with rollers , self aligning return frame , roller crr1050 mm belt , carrier roller 400mm len , carrier roller 380mm len , rubber impact roller , roller rtn 1050 mm , roller rtn asy v type , return roller , sa carrier frame , roller garld5 roll , self aligning return frame , 35 deg. carrier frame , frame , roller , carrier , 35 deg. carrier frame , roller crr 1200 mm belt , carrying idler , rubber roller impact , carrier frame with roller , sa carrier frame 1200mm belt , roller pln rtn1200 mm belt , roller rtn assly v type , self aligned return frame , garland roller for 1200 , return roller bracket (plain) , d shackle for garld roller , steel en8 pin , roller guide

Central Government And Public Sector

CTN :45658186 Due date: 14 Jul, 202614 Jul, 2026 NA
Tender For 1.87612010580 carrying idler assembly for 1800mm width belt conveyor size 152.4 x 670 x 25 mm , 2.87612010100 impact idler assembly for 1800 mm width belt conveyor size 114.3 x 665 25 mm , 3.87612010650 carrying idler assembly for 1200mm width belt conveyor size 152.4 x 465 x 25 mm , 4.87612010410 return idler assembly for 1200mm width belt conveyor size 127 x 1400 x 25 mm , 5.87612011600 impact roller with rubber disc

State Government

CTN :45667106 Due date: 30 Jun, 202630 Jun, 2026 NA
Tender For supply of spares of packing machine 2.5 kg 1.2kg - web belt-285l (paper pulling belts), timing belt,width-25mm, type-at10, length-800, item code-dt10149, timing belt-width -50mm, type at10,length-1940mm, item code-dt10113, timing belt-210l (3/8 inchpx56 teethx3/4inch width), item code-dt10047, timing belt-240lx19wx3/8inch p,item code-dt10127, horizontal heaters-3/8x270l 170vx225w drawing no.509sk82848, vertical seal heater 110v 500w 420lg, item code -fh10233, drawing no -5090200006, vibrating fork level sensor, lsv-t1-h0-g4-pb2+nfl-c4-ei-oul200, item code-elv0078, paper mark sensor datasensor make (i-sensor), item code -epm0013, photo electric sensor, model no:bup-30-p, item code -esp0108, thermocouple, item code- fh10011a, drawing no -750200035a, rod type sensor item code -fh10043c, drawing no -4041100013c, proximity sensor-m18 std pnp, diffused ir sensor, m 18/65, pnp, 10, item code -esp0080, encoder, item code - fp10277, camozzi -double acting cyl dia 32, stroke-20, 31f2a032a020, item code - nc10363 for horizontal jaw, camozzi -qn1a32a10 short stroke single acting cyl -dia 32 stroke 10,item code -nc10279 for knife, camozzi - 31m2a025a080 compact double acting cyl. dia 25 stroke x 80, item code - nc10500 for web, camozzi -31m2a032a015 compact double acting cyl magnetic dia.32 stroke 15, item code - nc10476 for break, camozzi - single solonoid valve-5/2 way-1/8 with 24 dc coil-358-015-02-u77, item code - nv10234, camozzi - single solonoid valve-3/2 way-1/8 with 24 dc coil-338l-015-02-u77, item code - nv10236, knife guide item code - cd45505b, drawing no -1010600002b, knife guide plate, item code - cd60108, drawing no -509sk77470, spline shaft (2-dpm 1530+570l thk) item code - cd63442a, drawing no -5090405000a, driving shaft item code - cd53126b, drawing no -4960400011b, worm gear box-vf44v 7 hs b3,item code - fg10060, worm gear box shaft item code - cd32708b, drawing no -316sk56171b, driven bevel gear, item code - cd38690a, drawing no -3661300017a, driving bevel gear item code - cd38689b, drawing no - 3661300016b, worm bonfiglioli gear motor 20:1, 0.18 kw , vf30f1-20p63b5v6 + bn63b4,item code - fg20066, sprocket 19 teeth 1/2 pitch,item code:cs30182, drawing no:260sk23375, sprocket 1/2 inch p x 38 teeth (plate type) item code:cs30049a, drawing no: 06090049a, chain simplex 1/2inch pitch,item code: cc10001, coupling od 27mm x id 19 mm x 40 mm lg, item code - cc20046, spline shaft nut, item code - bl20014, needle roller bearing hk 1612 ntn make, item code -bn10053, deep groove ball bearing 61808 zz skf, item code -bb10227, bearing (skf) 608 zz, item code - bb10058, pivot pin long item code - cd63926, drawing no -509sk80490, spacer for rear jaw 25 lg item code - cd63633a, drawing no -509sk80366a, spacer for front jaw 17 lg, item code - cd63632a, drawing no -509sk80365a, crank drive shaft, item code -cd58348c, drawing no -5091400004c, compression spring, item code -cs40423, drawing no -1010600013, tension spring, item code -cs40428c, drawing no -5040715010c, tension spring for dancer, item code -cs40434a, drawing no -5092203003a, knife, item code -ck20210, drawing no -509sk82125, knife holders (knife guide pin-a),item code:cd45508, drawing no:104sk64104, knife holders (knife guide pin-b),item code:cd60107, drawing no:509sk77473, vigor make, programmable controller,model no.vb-1pg, unison-ssr, 25amp, model 801 zda 48 25 01, output ac voltage 24-480vac., barings and bushes, vertical sealing assembly, videojet tto 6210 printer rubber pads, schneider electric encoder cable-5m, 3x2x0.14 mm2 +2x0.34 mm2 shielded, motor end 12-pin circular connector m23,device end 10-pin connector rj45, order no.vw3m8102r50 for servo drive lxm32cd30n4, schneider make, 3n lug type pneumatic air shaft code no.cm10390, drawing no.5095k76930, temperature controller model no.sr1, shimaden make, auger for 2.5kg item code:-ca32408,drawing no.509sk82247, gear moter bn80b4, kw-0.75, rpm 1400 item code -em40236

CTN :45646801 Due date: 15 Jul, 202615 Jul, 2026 NA
Tender For supply of spares for all belt conveyors - a. main ash conveyorsreplacement of spares for all belt conveyors (carrying ideal pipe, impact ideal pipe, return roller pipe, head pulley etcconveyor spares specification, carrying rollerpipe dia : 115mmpipe length : 250mmshaft length : 280mm, impact rollerpipe dia : 115mmpipe length : 250mm.shaft length : 280mm , return rollerpipe dia : 90mmpipe length : 750mm shaft length : 810mm , head pulleypipe dia : 420mmpipe length : 750mmshaft dia : 80mm, b. bagasse conveyorsreplacement of spares for all belt conveyors (carrying ideal pipe, impact ideal pipe, return roller pipe, head pulley etcconveyor spares specification, carrying rollerspipe dia : 115mmpipe length : 450mmshaft length : 500mm, impact rollerspipe dia : 115mmpipe length : 450mmshaft length : 500mm, return rollerspipe dia : 100mmpipe length : 1400mmshaft length : 1450mm, take-up pulleys.pipe dia : 400mmpipe length : 1400mmshaft dia : 75mm, snub pulleyspipe dia : 323mmpipe length : 1400mmshaft dia : 75mm, tail pulleyspipe dia : 400mmpipe length : 1400mmshaft dia : 75mm

Central Government/Public Sector

CTN :45642730 Due date: 13 Jul, 202613 Jul, 2026 45.05 Lacs
Tender For supply of return rollers for 600 mm width belt as per drawing no.irel msp add on 003, item no 7 , carrying rollers for 600 mm width belt as per drawing no.irel msp add on 003, item no 4 , impact rollers for 600 mm width belt as per drawing no.irel msp add on 001 , return rollers for 500 mm width belt as per drawing no.irelmspadd on 003, item no1 , carrying rollers for 500 mm width belt as per drawing no.irelmspadd on 003, item no5 , impact rollers for 500 mm width belt as per drawing no.irelmspadd on 002 , guide rollers as per drawing number op-05-m-310 a, item no1 , idler frame for 600 mm width belt as per drawing number op-05-m-269 a1 , idler frame for 500 mm width belt as per drawing number op-05-m-269

corporations/Associations/Others

CTN :45625891 Due date: 04 Jul, 202604 Jul, 2026 NA
Tender For annual rate contract for construction work with materials and labour for mahudha nagarpalika area. - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead (a) for loose or soft soil, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying cement concrete 1:3:6 (1 cement : 3-coarse sand :6- hand broken stone aggregate 40 mm. nominal size) and curing complete excluding cost of form work in :(a) foundation and plinth, providing and laying compacted w.b.m. 100 mm. thick of grading-i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading-ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rcc slabs & landings, providing and casting in situ ordinary cement concrete m-200 forkerbs/kerb blocks including formwork, curing and finishing complete. (upto 10 ton), providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete (upto 10 ton), providing tmt bar fe 500/500d reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level (upto 10 ton), white stone bela masonry block in course in foundation, plinth & super structure with stone of approved quality in cement mortar 1:5 (1cement : 5 course sand) including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 : 4 course sand), providing 15 mm thick cement plaster in single coat on fair side brick/concrete walls for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry. (ii) cement mortar 1:4 ( 1 cement : 4 sand), providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. (ii) cement mortar 1:4 ( 1 cement : 4 sand), 20 mm thick sand faced cement plaster on walls upto height 10 meters above ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1:cement - 3:sand) and 8 mm thick finishing coat of c.m. 1:1 (1:cement - 1:sand) etc. complete, providing and laying white glazed tiles of 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1:cement - 3-coarse sand) finished with flush pointing in white cement., providing and laying white glazed tiles of 6 mm thick in skirting of
 Loading, Please wait...

Connect us via What's Up