Latest impeller ring Tenders | Government impeller ring Tenders

State Government

CTN :45724230

01 Jul, 2026 NA

Fatehabad - Haryana

Tender For tender for pump spare parts & repairs/ bearing ,6309/pump bearings 6309 ,carriage charges of pump from workshop to site after repair / at w/w ,gailn plate new of ms material / glain plate ,labour of pump set opening and fitting./labour charges ,pump housing including bearing sheet made new by welding brass. / 40 hp pump shaft bearing and sheet grinding ,charges ,main bush new of steel / pump bush steel ,making new impeller ring / making of impeller rings

Central Government/Public Sector

CTN :45045190

02 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For bid to ras corrigendum : supply of support ring to spec p355nh 04 nos , impeller ring to spec sa 592 gr f 04 nos , pin fixed end to spec ste500v 02 nos , pin free end to spec ste500v 02 nos

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

Central Government And Public Sector

CTN :45704009

17 Jul, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of kirloskar brothers limited make cooling and purification pump spares - impeller-15100 , pump shaft-18001 , casing ring-19000 , casing ring-19100 , impeller ring-19200 , impeller ring-19300 , drip pan-22600 , liquid deflector-23600 , deflector-de-23603 , bearing housing-24000 , latern bracket-24800 , support foot-25100 , shaft sleeve-31500 , set of keys-32000-32100 , impeller nut-33000 , lock nut-33600 , st box bushing-35000 , quenching bush-36000 , lock washer-41500 , constant level oiler-44300 , oil breather-4440 , internal circlip-48500 , set of oil seals-50000 , set of gaskets-51104-51400-51504-51604-68204 , set of o rings-52301 , impeller-15100 , pump shaft-18001 , casing ring-19000 , casing ring-19100 , impeller ring-19200 , impeller ring-19300 , drip pan-22600 , deflector-de-23603 , liquid deflector-23600 , bearing housing-24000 , latern bracket-24800 , support foot-25100 , shaft sleeve-31500 , set of keys-32000-32100 , impeller nut-33000 , lock nut-33600 , st box bushing-35000 , quenching bush-36000 , lock washer-41500 , constant level oiler-44300 , oil breather-44400 , internal circlip-48500 , set of oil seals-50000 , set of gaskets-51104-51400-51504-51604 , set of o rings-52301 , casing cover -22000 , casing cover-52301

State Government

CTN :45694285

06 Jul, 2026 80.98 Lacs

Umaria - Madhya Pradesh

Tender For procurement of critical spares of tg set for aoh of unit no. 3 and 4, at sgtps, mppgcl, birsinghpur. - hp shaft sealing front as per tender schedule, sealing ring, sealing ring, sealing ring, hp shaft sealing rear as per tender schedule, sealing ring, sealing ring, sealing ring, ip shaft sealing rear as per tender schedule, sealing ring, ip shaft sealing front as per tender schedule, sealing ring, lpc front shaft sealing as per tender schedule, sealing ring, sealing ring, lpc rear shaft sealing as per tender schedule, sealing ring, sealing ring, bearing yoke keys, fitted key for brg. no. 1 yoke bottom, fitted key for brg. no. 1 yoke side, fitted key for brg. no. 2 yoke bottom, fitted key for brg. no. 3 yoke bottom, fitted key for brg. no. 3 yoke side, fitted key for brg. no. 4/5 yoke bottom, fitted key for brg. no. 4/5 yoke side, radial and axial keys as per tender schedule, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key ( hp rear brg pedestals), fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key l -196 (radial gusset block in condenser), key l-78, fitted key ip inlet insert as per tender schedule, fitted key ip inlet insert as per tender schedule, fitted key ip extraction connection, fitted key ip casing assembly, key ip casing assembly, fitted key (hp seal), fitted key for hp casing (radial), fitted key for hp casing (axial), brass sealing strip 8x2x845, brass sealing strip roll 8x2, stud m24 x 250 for ms/hrh strainer with hex nut & washer, coupling bolts m56 x270 for hp/ip, coupling bolt m64x335 for ip-lp, clamping piece for lp turbine, locking plate 7th stage for lp turbine, locking plate 8th stage for lp turbine, helical compression spring, fasteners, stud m52 x 220- 20 x185 modified, stud am64 x 305- 20x248, stud am 72x06x320 25x257, stud am 72x06x520 25x308, stud am 72x06x380 25x252, cap nut m52 for hp inner casing, cap nut pm 64, cap nut pm72 x 6, screw hex m 36x180, screw hex m 30x110, mop spares, bearing bush, bush, mop impeller ring dia 185, governor impeller ring dia 106, o ring, shaft check nut 30x1.5, sealing ring, .

CTN :45407436

30 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of 39 x armt spares b b - e2 csn 021181 24 screw m8x16 , e2 140046 2051 f1 washer , e2 140043 1814 e1 hook , e2 140046 2661 e1 pin , e2 csn 022140.1 pin 4x25 , e2 140045- 1673 e3 pin , e2 140045 3507 e3 hook , e2 140045 10207 e3 clamp , e2 type 6208 rs bearing guiding sheaves tab 88 , e2 140045 1040 e1 spacing ring , e2 type 51 306 bearing , e2 type 51105 bearing , e2 140046 2712 e1 fork , e2 140046 2715 e1 fork , e2 140045 6512 d1 pin , e2 140046 4141 e2 pin , e2 137664 103 e3 union nut , e2 140046 1341 e1 pin , e2 csn 021115 25 screw m16x30 , e2 type 51314 bearing , e2 140041 35291 d1 yoke with pin , e2 137664 104 e3 union nut , e2 137664 306 e1 union nut , e2 type 51205 bearing , e2 140043 1664 e1 flat safety element , e2 1400 11 227 c1 flat tie bar , e2 140045 2238 e3 pin , e2 140043 1663 e1 yoke , e2 140045 1304 e2 distance ring * /bid number : gem/2026/b/7610658 + /dated: 02-06-2026 ' ' / bid document 1 / 27

CTN :45647762

02 Jul, 2026 NA

Multi City - Multi State

Tender For supply of spare for generator transformer & cooling water system - winding temeperature transmitter, dual output: 4-20ma, 90-260v ac/dc, precimeasure , current converter unit ccu18, input-pt100 rtd, output: 4-20ma dc,90-260v ac/dc , digital winding temp. remote indicator, range-0-150°c, model no. 2245.t2, precimeasure , digital oil temp. indicator remote, range-o-150°c, model no. 2245.t2, precimeasure , mcb breaker 4 poles, 10a, 10ka, c-curve, 415v ac, siemens , mcb, 6a, 2 pole, 10ka, c-curve, 240vac, siemens , mcb, 16a, 2 pole, 10ka, c-curve, 2 40vac, siemens , mcb, 2a, 1p, 10ka, c-curve, 240v ac, siemens , mcb 10a, 1p, 10ka, c-curve, 240v ac, siemens , mcb, 6a, 2pole, 10ka, c-curve, 110v, ac, siemens , moulded case ckt breaker (mccb) 32a, 55ka, 4pole, 415v ac, siemens , power contactor, 4 poles, 415vac, 12a, 415v with add on 2no+2nc (aux. supply 110v ac)3tf31-10-0a , aux. contactor (ac supervision), 110v ac, 2no +2nc,3th30-22-0a , aux. contactor, 110v ac, 3no+1nc with add-on aux. contact block 2no+1nc,3th30-31-0a , motor thermal overload relay (4-6.3a),3ua50 001g , relay used in the cooler control circuit (minilec) minilec d1hls1 , time delay relay, 110v, 0.1-10h with 2 c/o contact, micon 2a5dt5 , selector switch 2 way with off, 6a, 240v 2 pole, type: s10-61025-bb, make: l&t/kaycee , selector switch, 10a, 440v, 2 ways with off 4 pole, make: l&t/kaycee , selector switch, 2way on off,10a, 440v, 10 pole , auxiliary transformer, 415v/55-0-55 (110v), 500va, make: l&t/kaycee , led (red, green) for pump on indicator suitable, 110v ac , differential pressure gauge (fiebig) 0-1.5 kg/cm 2 above to 380v 30w 50va , water leakage detector sapcon probe length 68mm , resistance temp. detector (rtd) for (wti and oti), pt 100, precimenasure , pump main & stan - by selector switch, , nylonwasher size 2.5tkx4 id x8 od , generator , carbon brush (50.8x38.1x25.4) mm, hm6 grd , brush holder , slip ring assembly (refer annexure-10) , insulation stud with epoxy with fire , retardant, shaft l= 315 from flange face, ø55, flange l 150, width 90, flange thickness 20, hole ø18, hole spacing(l) 108, hole spacing (w) 46 measurements in mm , duplex rtd pt/100 l-930, b-630, h 370 (mm) , dail type thermometer (dtt)l=35 m,.length of bulb--100mm, bulb coneection-standard p.f. 3/4 double union. 5 kg/cm2, type-gas filled, dial siz- 150 mm or 160 mm. accuracy+-2-degree celcus. (refer annexure-1) , thermostat for (guide bearing) , max operating voltage: 220v dc (±10%) , temperature range: 20°c to 100°c , max working temperature: 110°c , capillary tube length: 6 meters , switch action: 1 spdt for alarm and 1 for trip , (at two different temperatures) , differential temperature: 2°c to 5°c , accuracy: ±3°c of set point , repeatability: ±3°c , working temperature: 110°c ((refer annexure-2) , thermostat for lower guide bearing, (spec same as sl, 35) , thermostat for space heater (maximum current capacity: 1 amaximum operating , voltage: 250 vdc ±10%temperature range: 25°c to 90°ccapillary tube length (l): 5 meters switch action: spdtdifferential temperature: 3°c to 5°caccuracy: ±3°c of set pointsetting temperature:75°c for bearing & hot air40°c for heater controlrepeatability: ±3°c (refer annexure-3) , motorised valve, actuator type- k300 g1/g2a, enclosure -wt to ip 68, output speed-36 rpm, max tourque-305nm, motor 1.2 kw, 415v, average load-3.10a and locked rotor, 25a (roterz brand) , gate valve (1/2") brass , hex bolt m12*30 , hex bolt m12*50 , hex bolt m6*20 , hex bolt m16* 68 , stud m12*100 , cooling water system , moulded case circuit breaker (mccb), 500a 3p 50ka 415vac, mccb, with magnetic releases, dsine dn3-630m,500a, make-l&t , copper 220v mnx 550/650 spare coil cat no:cs94193(10 each) co , power contactor, 250a, 3p, power contactor with 240v ac coil, aux 2no+2nc contacts, mnx250, make-l&t latch relay, latch relay with 3no+1nc, 240vac coil aux supply with mechnical interlock electrical reset , aux contactor, auxilary contactor

Central Government And Public Sector

CTN :45512005

29 Jun, 2026 NA

Kaiga - Karnataka

Tender For corrigendum : 1. lock washer for imp. nut, part no. 4100101 of kbl make pump model bhma87m , 2. casing ring, part no. 1900101 of kbl make pump model bhma87m , 3. bowl bearing, part no. 3540101 of kbl make pump model bhma87m , 4. impeller shaft sleeve, part no. 3160101 of kbl make pump model bhma87m , 5. brg spider with 4 arms, part no. 2450101 of kbl make pump model bhma87m , 6. intermediate shaft sleeve, part no. 3120101 of kbl make pump model bhma87m , 7. transmission bearing, part no. 3570101 of kbl make pump model bhma87m , 8. int. shaft 100 dia - 1400mm long, part no. 1840201 of kbl make pump model bhma87m , 9. int. shaft enclosing tube, 1870 mm, part no. 1710401 of kbl make pump model bhma87m , 10. head shaft sleeve, part no. 3100101 of kbl make pump model bhma87m , 11. lantern ring, part no. 2270101 of kbl make pump model bhma87m , 12. gland split, part no. 2290101 of kbl make pump model bhma87m , 13. cooling coil, part no. 3700101 of kbl make pump model bhma87m , 14. journal brg., part no. 3710101 of kbl make pump model bhma87m , 15. thrust brg. lid, part no. 2790101 of kbl make pump model bhma87m , 16. impeller distance sleeve, part no. 3170101 of kbl make pump model bhma87m , 17. oil level indicator, part no. 4460101 of kbl make pump model bhma87m , 18. nyloc nut, part no. 4080101 of kbl make pump model bhma87m , 19. coupling pin, part no. 4040101 of kbl make pump model bhma87m , 20. couopling washer 70d x 15l., part no. 4090101 of kbl make pump model bhma87m , 21. coupling bush, part no. 4000101 of kbl make pump model bhma87m , 22. bearing bush of impeller, part no. 3530101 of kbl make pump model bhq37m , 23. lock washer, part no. 4100101 of kbl make pump model bhq37m , 24. casing ring, part no. 1900101 of kbl make pump model bhq37m , 25. impeller ring, part no. 1910101 of kbl make pump model bhq37m , 26. bowl bearing, rubbe, part no. 3540101 of kbl make pump model bhq37m , 27. impeller shaft sleeve, part no. 3110101 of kbl make pump model bhq37m , 28. impeller shaft, part no. 1860101 of kbl make pump model bhq37m , 29. pump bowl, part no. 1200101 of kbl make pump model bhq37m , 30. transmission brg, part no. 3570101 of kbl make pump model bhq37m , 31. transmission shaft, 2500mm long, part no. 1840101 of kbl make pump model bhq37m , 32. bearing spider 5 arm in full ring, modified, part no. 2450101 of kbl make pump model bhq37m , 33. head shaft distance sleeve, part no. 3170201 of kbl make pump model bhq37m 5 , 34. bearing bush, thordan brg, head shaft bearing, part no. 3520101 of kbl make pump model bhq37m , 35. head shaft sleeve, part no. 3100101 of kbl make pump model bhq37m , 36. cooling coil, part no. 3700101 of kbl make pump model bhq37m , 37. journal brg., part no. 3710101 of kbl make pump model bhq37m , 38. thrust brg. lid, part no. 2790101 of kbl make pump model bhq37m , 39. int. shaft sleeve, part no. 3120101 of kbl make pump model bhq37m , 40. bush coupling, 12 nos., part no. 4000101 of kbl make pump model bhq37m //bid details 2 / 35

CTN :45615396

29 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of c16m260040 spares for boiler feed water pump tag no 121 g1a in co gen : - casing wear ring , p/n-502.01 , wearing ring casing , p/n-502.02 , impeller wear ring , bearing shell , p/n-370(modified) , bearing housing , p/n-350.01 , thrust bearing housing , p/n-354 , impeller ring , p/n-503.01 , set of fasteners(pn-901 , 902 , 903 , 914 , 921) , sealing ring( a08/11.5x1) , sealing ring(a33/39 x 2) , sealing ring( a21/26x1.5) , sealing ring(a14/18 x 1.5) , throttle sleeve , p/n-522 , matl-aisi-410 , spacer sleeve , p/n-525.01 , matl-aisi410 , spacer sleeve , p/n-252.05 , matl-en 8 , retainer ring , p/n-505.01 , matl-aisi410 , retaing ring , p/n-506.01 , spacer ring , p/n-504.01 , matl-en8 , spacer ring , p/n-504.02 , matl-aisi 410 , gaskets & o-rings(set) , matl-viton , circlip(size-80x2.5) , p/n- 932.04 , balancing disc , p/n- 601.01 , bearing shell(suction&disch.) , p/n-370 , bearing cartridge , p/n-381 tag-121g1ab

Central Government And Public Sector

CTN :45609010

30 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of bearing housing for crd booster pump part no-350 , bearing bush for crd booster pump part no-545.4 , adapter for crd booster pump part no-145 , impeller ring-suction impeller for crd booster pump part no-503.1 , spacer sleeve for crd booster pump part no-521 , split ring for crd booster pump part no-501 , bearing sleeve for crd booster pump part no-529.4 , bearing sleeve for crd booster pump part no-529.2 , bearing sleeve for crd booster pump part no-529.1 , pump shaft with keys ofr crd booster pump part no-211 , bearing bush for crd booster pump part no-545.1 , wearing ring-casing-diffuser-stage for crd booster pump part no-502.2 , bearing bush for crd booster pump part no-545.2 , wearing ring-casing-diffuser- suction for crd booster pump part no. 502.1 , bearing cover for crd booster pump part no-360 , withdrawal nut for crd booster pump part no-923 , centering sleeve for crd booster pump part no-526 , oil level tube for crd booster pump part no-641 , constant level oiler for crd booster pump part no-638 , set of gasket and o-rings for crd booster pump , set of fasteners for crd booster pump , impeller ring-stage impeller for crd booster pump part no- 503.2

Impeller Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector

Central Government And Public Sector