Latest impeller pump Tenders | Government impeller pump Tenders

State Government

CTN :45739217

15 Jul, 2026 NA

Ukai - Gujarat

Tender For supply of abb make ph sensor , abb make ph analyzer , abb make conductivity analyzer , conductivity sensor , annual spares kit , tubing kit exc pump tubes , power supply board panel mount ac

Central Government/Public Sector

CTN :45713891

20 Jul, 2026 20.00 Lacs

Chandimandir - Haryana

Tender For repair / maint of split acs 2/1.5 ton , windows acs 2 / 1.5 ton , voltage stablizers and connected items installed at command hospital (wc) and other various location in aor of age e/m ch - servicing of split type ac of capacity 2/ 1.5 tr after disconnecting all incoming and outgoing electric connection, water drain pipe line connection etc. and wash with approved chemical mixed water with the pressure pump, after servicing cleaned all the disturbed area and reassembling the water/electric connection and testing for entire satisfaction of engr-in-charge., all as per item no. 1 here-in-above but window type ac 2/1.5 tr capacity., supplying and charging of refrigerant gas r-22 only after vacuuming dehydration, leak testing of the system as per standard practice testing for proper cooling effects and satisfactory performance complete all as specified and as directed by engr-in-charge for room split/window type ac of capacity 2/1.5 tr., all as per item no: 3 above but gas r-32, all as per item no: 3 above but gas r-410a., all as per item no: 3 above but gas r-134a., taking out defective capacitor of capacity 50+6 mfd after disconnecting all incoming and outgoing electric connection including supply & fix new capacitor on same place and testing complete all as specified and as directed by engr-in-charge, all as per item no:7 here in above but of capacity 45+4 mfd ., all as per item no:7 here in above but of capacity 45 mfd ., all as per item no: 7 here in above but of capacity 6 mfd ., all as per item no: 7 here in above but of capacity 4 mfd ., supply & fixing as in replacement copper pipe 1/2" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 1/4" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 5/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 3/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply and fixing of insulation foam for copper pipe of size 1/2" after removing old one., supply and fixing of insulation foam for copper pipe of size 1/4" after removing old one., supply and fixing of insulation foam for copper pipe of size 5/8" after removing old one., supply and fixing of insulation foam for copper pipe of size 3/8" after removing old one., supply and fixing as in replacement of pvc flexible pipe 15 mm dia including any fittings as required complete inclusive of any type of leakage testing., all as per item no: 20 above but pipe of 20 mm dia., supply and fixing as in replacement of pvc water drain pipe 25 mm dia complete inclusive all fittings and any type of leakage testing., material and labour for sub main wiring with 2 x 2.5 sqmm +1 x 2.5 sqmm single core flame retardant pvc insulated unsheathed cable with stranded copper conductor drawn in and including heavy grade frlsh pvc concealed conduit isi marked with all accessories on walls and making good the disturbed surfaces including all conduits fittings, clamps guittes etc for earth dbs and boxes with proper thimbles all as directed by engr-in-charge. note :02 run of 2.5 sqmm , 01 run of 2.5 sqmm cable and 01 run of conduit shall be measured as one unit and paid accordingly., all as per item no: 23 here in above but of size 2x 4 sqmm +1x 4 sqmm., m&l cutting chases, pinning in stone concrete block or slab walls & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring ,etc., and making good, cutting exc. 10 cm girth., supply and fix as in replacement of rigid non-metallic pvc conduit of size 20

CTN :45560058

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of clamp meter , 5 gallon compressor oil tin , core for filter drier , filter drier core rpe48bd , relay base type rxze2m114 , relay 24v dc 4 co rxm4ab2bd , single core 40 mmsqlfh cable , ss washer 125 , screw driver set , ss 304 tubing , pilot tube fitting , filter drier replacement core , potentiometer shaft , relay , store room thermostat , piston set , valve plate set , pocket for temp switch , gasket , therm injection valve , defrost heater element tat 30 , shut off valve , shut off valve , shut off valve , temperature transmitter pt 10 , solenoid valve on oil return line , condensers of chilled water units ac , thermometer discharge line , thermometer cwinlet , flex metal hose , oil heater , therm injection valve , needle valve , gauge oil pressure , feeler pocked , stop valve , stop valve , power contactor 115 vac , air contactor , chilled water pump of air conditioning plant , fuse 500v , relay 24vdc , rc module , auto controller , antifreeze thermostat , fuse switch , fuse switch , sight glass set , current meter , pilot lamp , valve relief , metaflex coupling api 671

CTN :45416452

22 Jul, 2026 2.42 Crore

Rohtak - Haryana

Tender For corrigendum : rate contract for 02 years( extendable) for purchase of various types of consumables for department of aneaesthesiology, pgims, rohtak- heat & moisture exchange filters (hmef): hepa bacterial and viral fi with hme properties offering optimum hydrophobic filtration performance. gas sampl port, for end tidal co2 monitoring. recommended tidal volume range 150-1200ml.ev pleated filter medium to allow maximum filtration efficiency with minimal resistance flow. low dead space, not more than 45-55 ml. single use, sterile ece/usfda/iso/ , heat&moisture exchangers (hme) filter for pediatric us , recommended tidal volume <600ml.low weight. low dead space. suitable for b ventilated and spontaneously breathing patients. low resistance to flow. corrugated pa medium with high efficiency to recover about 75% of the energy and moisture. single sterile. ece/usfda/iso , heat & moisture exchangers (hme) for spontaneous breathing in tracheostomized patients. suction port to allows access to suct , catheter. clear housing to allow visualization of contamination. integrated oxygen port allow delivery of supplemental oxygen. recommended tidal volume range from 1000ml.compact and lightweight. corrugated paper medium device can be used fo maximum period of 24 hours. single use sterile. minimum resistance anti occlus mechanism. ece/usfda/iso , epidural set. a set containing tuohy's epidural needle minimum length 80m 16g, 17g and 18g, and corresponding gauge epidural catheter with closed tip and th lateral eye, length 90-100 cm and flat filters 0.2 micrometer hydrophilic two way, fill area approx 4.91 cm², priming volume 0.75 ml all connections should be of luer lock ty lor(loss of resistance) syringe, presterilized. ece marked/usfda approved , combined spinal epidural set. containing 18 g touhy epidural needle minimum 80 mm length. pencil point, spinal needle with twist lock system, marking tuohy's needle hub and depth marking on tuohy's needle hub containing correspond clear catheter with connection, closed end and 3 lateral eye of approx. length 90-100 with epidural filter 0.2 micrometer hydrophilic two way, epidural sponge and lor (loss resistance) syringe. ece marked/usfda approved - , needle for spinal anaesthesia, quincke type, same colour coding the hub and stylet, presterilized. usfda and europen ce approved- , (a) 23 g, 90mm length od approx 0.64 mm, , (b) 24g,90mm length od approx 0.5mm with/without introducer , (c) 25g, 90 mm , (d) 26g, 90 mm , (e) 27g, 90mm , paed. spinal needle without introducer, colour coded length 50mm, g, od 0.5 mm, presterilized. usfda and europen ce approved , cuff manometer: allows controlled initial cuff inflation. intermittent press monitoring facility. instant visual confirmation of intra-cuff pressure. simple operation pressure adjustment without need for disconnection or introduction of syringe into syst solid green zone indicates usual cuff pressure range for tracheal & tracheosto tubes.connecting tube is supplied with the gauge for convenient positioning. portable ga and clips easily into pocket. , face mask- clear, reusable, pvc material, transparent for good visibil adjustable cushion for better comfort. , sizes:- , a) 0, , b) 1, , c) 2, , d) 3,0) 4,1) 5- , anatomical facemask made up of antistatic inflating pad, malleable, anatom. chaned to give precise seal and fit comfortably, sizes 1.2.3.4 , disposable lma with preformed curve 90 degree like ilma with airwa tube with standard connectors for anaesthesia circuit. us fda approved. sizes 1, 1.5,2, 2.5,3,4,5 , resuable pressure infusion bag for administration of fluid to patient unde pressure, compatible with 500 ml fluid bags, flexible, stury, pvc tubing and manometer stop cock and hand pump, latex free , clear pressure- monitoring lines, which can withstand pressure up to 500 psi with minimal damping, non kinkable, pre-sterilized, disposable, id/ed1/2 mm. length 100 cm, 150cm & 200 cm. low dead space but pe may be optional

CTN :45718565

09 Jul, 2026 NA

Allahabad - Uttar Pradesh

Tender For supply of changeover four pole 100 amps h d , capacitor 3 point 15 mfd , switch piano modular type 5 amp , desert cooler fan motor 1400rpm with fan blade , power contractor ml 3 with 2 no 2 nc , copper lugs heavy duty long barrel 95 sqmm , on change over 200 amp 4pole 415 volts , gun metal gate valve 20 mm bore , capacitor 2 point 5 mfd , gun metal gate valve 15 mm bore , mcb tp 100 amp , cable jointing kit for 11 kv earthed indoor terminate 3 core heat shrinkable xlpe of size 120 sqmm to 185 sqmm , cable jointing kit for 11 kv earthed outdoor terminate 3 core heat shrinkable xlpe of size 120 sqmm to 185 sqmm , copper lugs 35 sqmm , mcb tpn 100amp 4 pole , power contactors 240 volts , pvc adhesive tape 25mm 25 mtr long , alluminium lugs heavy duty long barrel 35 sqmm , wood wool pad for desert cooler , gi nipple 20x75mm long , alluminium lugs heavy duty long barrel 25 sqmm , pvc insulation tape 9 10m 20mm , pvc adhesive tape 20mm 25 mtr long , mcb 160 amp , gi tee equal 20mm dia isi marked , batton holder , gi elbow 20mm dia isi marked , gi union 25mm , power contractor ml 4 with 2 no 2 nc , gi union 20mm , alluminium lugs heavy duty long barrel 95 sqmm , gi union 50 mm , ac starter unit comprising 25 amp mcb , pvc tape 20mm 15 mtr long , alluminium lugs heavy duty long barrel 70 sqmm , copper lugs heavy duty long barrel 10 sqmm , water lifting pump for desert cooler , gun metal gate valve 25 mm bore , alluminium lugs heavy duty long barrel 120 sqmm , starting capacitor 100 to 120 mfd , holder angle bkl , candle bulb 40w , led 0.5 watt lamp colorful red green , gi plug 20mm dia , running capacitor 40 to 60 mtd , al lugs heavy duty long barrel 25 sqm , washer nut and bolt size 2x2mm thick as per sample , running capacitor 4 mtd , electrical tape ht scotch 23 of width 19mm 25mtr length , cable jointing kit cold shrinkable straight through of cable size 120 sqmm 3 core 11kv ht , electrical tape ht scotch 23 of width 38mm 25mtr length , cable jointing kit cold shrinkable outdoor of cable size120sqmm 3core 11kv , electrical tape ht scotch 23 of width 25mm 25mtr length , cable jointing kit cold shrinkable outdoor of cable size 95 sqmm 3core 11kv , cable jointing kit cold shrinkable straight through of cable size 95 sqmm 3 core 11kv ht , sheet metal enclosure with plug top and mcb sp 20a, , cable jointing kit cold shrinkable indoor of cable size 70 se 120sqmm 3 point 5 core , thermostat for geyser 25 ltr , cable jointing kit cold shrinkable indoor of cable size 150 oblique 240sqmm 3 point 5 core , cable jointing kit cold shrinkable indoor of cable size 25 oblique 50 sqmm 3 point 5 core. , cable jointing kit cold shrinkable outdoor of cable size 150 oblique 240 sqmm 3 point 5 4 core. , cable jointing kit cold shrinkable outdoor of cable size 16 oblique 50 sqmm 3 point 5 4 core , gi tubing 40mm bore med grade , gi tubing 50mm bore med grade , cable jointing kit cold shrinkable indoor of cable size 300 oblique 400sqmm 3 point 5 core. , gi tubing 25mm bore med grade , capacitor 2 point 5 mfd 230 v , cable jointing kit cold shrinkable outdoor of cable size 70-120 sqmm 3 point 5 4 core , electrical tape ht scotch 23 of width 50mm 25mtr length , sluice valve isi marked pn 1 point 6 brass spindle with hand wheel 100mm , sluice valve isi marked pn 1 point 6 brass spindle with hand wheel 80mm. , led bulb 7 watts 230 v , sluice valve isi marked pn 1 point 6 brass spindle with hand wheel 150mm , non return valve isi marked pn 1 point 6 150mm , gm gate valve isi marked pn 1 point 6 50mm , led down lighter 6w , aluminium cable lugs long //bid details 2 / 126 barrel bolt hole size 240 sqmm cable , heating element 1500 watt triangular type , gi tubing 20mm bore med grade , non return valve isi marked pn 1 point 6 100mm , aluminium cable lugs long barrel bolt hole size 120 sqmm cable , aluminium cable lugs long barrel bolt hole size 25 sqmm cable , led lamp bulb holder batten type bakelite , aluminium cable lugs long barrel bolt hole size 50 sqmm cab

State Government

CTN :45710371

30 Jun, 2026 NA

Panipat - Haryana

Tender For alupur block: madlauda panchayat: alupur dist.: panipat annual maintenance work for water supply. - labour for opening and fitting charges, labour for pumpset lowering and lifting, providing and fixing new bowel, providing and fixing new impeller, pump spare parts & repairs - new shaft, impeller brazing and turning, pump bowl bush, gm neckring , gm neckring.

CTN :45690148

15 Jul, 2026 1.50 Lacs

Leh - Jammu And Kashmir

Tender For supply of joint rubber , sea flow bilge pump 2000 gph , impeller pump , hose sea water pump , quick fix

CTN :45688947

06 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of syringe 50 mcl for mms , quartz sample boats 40 x 9 mm , hook for abd , cooling unit with temperature sensor , multi purpose combustion tube , uv lamp for uvfd detector, standard , tubing kit multi ea 5000 by 5100 , adsorption material for boat combustion , sealing elements horizontal set-1 , set sealing disks 17 mm , o-ring for membrane dryer 48 , auto protection filter set , membrane dryer 48 for multi ea 5000 , auto-protection valve assembly , pump unit cld 5x00 , mfm multi ea and n by c , air filter for membrane dryer pump

corporations/Associations/Others

CTN :45433595

02 Jul, 2026 30.00 Lacs

Ranchi - Jharkhand

Tender For corrigendum : supply of elite diluent , elite lyse 1 , elite lyse 2 , elite lyse 3 , elite h580 cleaner , tuberculin ppd 10 tu , tuberculine ppd 5 tu , elite h 5 con h 3ml , elite h 5 con n 3ml , elite h 5 con l 3ml , dispsable esr pipette , vaccum esr vial , tooth forcep , s s tray , pastere pippette , pvc bottle plastic 500ml , micropipette 5 to 50ul , micropipette 100 to 100 ul , plastic copline jar , centrifuge tube 15 ml , edta vaccum 3 ml vial , plain vaccum with gel 5 ml , oxa - flu vaccum 3 ml , urine pot 60 ml , glass slide , cover slip , urine strip 2 parameter , urine strip 10 parameter , haemospot obt kit , geimsa stain , leishmain stain , cytofixer , iso propyl alcohol , semen diluting fluid , surgical sprite 400ml , cotton roll , hand sanitizer 500ml , tissue paper roll , nitrile gloves , blood collection needle , capillary tube , filter paper , face mask 3 ply , reference electrod for ise , sodium electrode for ise , potassium electrode for ise , chloridfe electrode for ise , ise 4 ch pump tubing kit * /bid number : gem/2026/b/7491790 + /dated: 04-06-2026 ' ' / bid document 1 / 39

State Government

CTN :45674739

26 Jun, 2026 NA

Rohtak - Haryana

Tender For kahni 7 1/2 biswa , kahni 121/2biswa , group of 2 no. of habitations annual mtc.works for water supply. - providing and placing chuck nut on pump, making heavy duty steel sleeve, providing and fixing multi size ss stud for pump, repairing of pump housing with brass welding and turning, providing and fixing 10hp impeller, pump coupling.

Impeller Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government