Latest impeller shaft Tenders | Government impeller shaft Tenders

corporations/Associations/Others

CTN :41289149

19 Aug, 2025 1.15 Crore

Rajkot - Gujarat

Tender For supply of spare-parts of vertical turbine pumps at bhadar dam site.--, intermediate column pipe, , distance pipe, , taper column pipe, , head shaft, , impeller shaft, , intermediate shaft, , discharge head, , intermediate shaft sleev, , rubber brg.

Central Government/Public Sector

CTN :41303730

12 Aug, 2025 NA

Burnpur - West Bengal

Tender For supply of complete bowl assembly stgcwp , sleeve for line shaft 1 stgcwp , sleeve for line shaft 2 stgcwp , sleeve for line shaft 3 stgcwp , sleeve for impeller shaft stgcwp , coupling fastener set stgcwp , bowl ring 750t , bowl bearing 750t , impeller shaft 750t , bearing 750t , sand collar 750t , suction bell bearing 750t , modified impeller stgcwp , line shaft 750t

CTN :41306060

23 Aug, 2025 5.49 Lacs

Bardhaman - West Bengal

Tender For supply of bearing housingh , set of tie bars , casing cover suction side , casing cover delivery side , enclosed impeller , shaft sleeve , shaft sleeve ps , bearing housing bolt , balancing disc , balancing ring , oil ring for bearing , compound , rotating element , contactor main , pilot relay , guide tips , set of two gland , middle body , bearing bushes , suction plate , partition plate , tie bolts ts and nut

Central Government/Public Sector

CTN :41288351

11 Aug, 2025 14.54 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of key, part no. shs6532320 , key, part no. shs6532321 , hex lock nut, part no. shs6532336 , bearing bush, part no. shs6532352 , helicoil lock insert, part no. shs6532479 , pump casing, part no. shs6532107 , impeller, part no. shs6532151 , pump shaft, part no. shs6532180 , casing ring, part no. shs6532190 , thrust bearing carrier, part no. shs6532247 , thrust bearing adopter, part no. shs6532272 , screw for impeller, part no. shs6532669 , gunmetal bush 100 mm x 70 mm, part no. shs6532353 , casing cover, part no. shs6532220 , column pipe, part no. shs6532132 , motor stool, part no. shs6532290 , bearing cover foor impeller shaft brg, part no. shs6532271 , thrust ball bearing, part no. shs6532262 , bend, part no. shs6532280 , gasket for casing, part no. shs6532511

CTN :41242658

19 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of servo motor control valve, running time meter, 1-4 mxpu4 elbow, frp filter od 137, solenoid valve, sampling cock, seal ring, filter and permeate pump casing, o ring, shaft seal, casing p-1, i b bearing p-16, o.b. bearing p-18a, circlip internal p-18b, oil level viewer p-19d, bearing lock out p-22, o-ring bearing housing p-33b, deflector p-40, breather p-45, lip seal i.b. p-47, lip seal o.b. p-49, mech seal p-60, bearing lock washer p-69, cover gasket p-73, bolts p-171d, foot bolt p-171g, flexible hose h.p.feed inlet, chi 2-40 shaft seal, pressure tube 1000l, pressure switch, bearing ring p- 47a, spacing pipe -p - 64.c, slotted nut p - 67, pump head for pump p-2, stay bolt for pump p - 26, chamber complete p - 4, neck ring p - 45, neck ring retainer, chamber with bearing ring p - 4a, spacing pipe - p - 64.a, wear part kit - repair kit, ball bearing d244 p153, ball bearing p- 154, shaft pin p-10, chamber, o-ring 16.3 od x 2.4 thk, o-ring 137.5 od x 3.3 thk, chamber complete, chamber, neck ring, neck ring retainer, bearing ring, spacing pipe 17.52l, spacing pipe 4.50l, washer, 8.20id x 13.50od, shaft seal, impeller, shaftseal p-105, ball bearing p-153, anode plug, rod connecting assy, plug for priming, spacer v-packing p-157, o ring over hauling kit, piston set, retainer set, seal kit, seal ring, charging screw, charging plug screw, head distributor 3-4 air connection, o ring for head distributor assembly, cartridge filter housing, cartridge filter head, o ring hydraulic disc, solenoide valve actuator, 3 way ball valve, hp straight conn .3-4 for smcv, connector 1 1-4 bsp f x 1 1-4 vivt, vict end connector 1 , module bypass nozzle, victaulic couplings 1 1-4, victualic coupling 1. 1-2, coupler for vict. coup.1, victualic couplers 1. 1-2, permeate male elbow, smcv spindle seat, smcv valve unit for 3-4 valve, smcv valve spindle unit, servo motor control valve, solenoid valve 3-8 f 2-way ve83, solenoid valve actuator, ball v/v brass 1-4 bspf chrome plated, compressed air regulator, control cabinet ro 1530, door stay for cabinet, circuit breaker 1.6-2.5amp, circuit breaker 1.6-2.5 amp, thermister over load relay, single phase protector, hrc fuse 2 amp, hrc fuse 25 a, hrc fuse-bs-3nw 415vac 32 amp, main control switch 63a, potention meter, running hour meter, pressure gauge 0-10 bar, pressure transmitter, hand conductivity meter, flow meter feed, flow switch, sand filetr bracket, lp hose 32mm, hp line pressure gauge pi 61 hp pump discharge, hp hose 3-8id 1 2unfmx1 2unffx800l, high pressure hose module outlet, hp hose of module in, hp hose 1 idx1-vicx1500l saf 2507, lp hose hp pump inlet, pulley for motor 2 groove, pulley for pump 2 groove, seal kit, ho pump seat kit, taper bush 1610 20 mm bore, taper bush for motor pulley, wedge belt, av mount akcc 85m, av-mount between main frame and hp pumpbase frame, hp pump crank case oil, allen key set, socket dt module, belt spanner, jubilee clips for d 25, membrane cleaner 22, membrane cleaner 55, h.p connection - feed-brine, high pressure transmitter 4 to 20 ma pt60, high pressure manifold 6 x 1, rubber hose from c-f outlet to hp pump inlet 20-30tpd, abs service kit ro 200-102, abs service kit - 40 tpd, e-spare kit ro 0510-510, filter pump motor bearing pump end , hp pump seal kit, hop pump valve kit, hose for pk-20 pump in-out, level switch

CTN :41065701

14 Aug, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : tender for supply of pump spares e e - nut bearing , impeller , sleeve shaft , oring set sor , oring pumpunit , ring wearcase , bearing bowl , oring , oring , sleeve shaft , sleeve shaft , bearing , oring set , sleeve shaft , coupling muff , key impeller , disc kbl , brg bowl , bearing trans , key , key , key , oring , spider brg , sleeve shaft , sleeve shaft , sleeve shaft , washer , impeller , cplg , oring pumpunit , oring coloumnunit , oring head unit , shaft impeller , pin ratchet , bush coupling kbl 400 up10a-f , nipple muff , impeller , oring bearing , packing gland , coupling screwed , impeller , shaft head , shaft impeller , carrier thrust , impeller , impeller , sleeve shaft , sleeve shaft , oring , ring split , gasket set

Central Government/Public Sector

CTN :41259880

06 Aug, 2025 NA

Porbandar - Gujarat

Tender For engineering defect rectification - defect rectification of various engineering defects as per rfp, e-678: aft ac sea water pump not developing sufficient pressure and excessive vibration observed. suspect pump impeller, shaft and bearing worn out. defect to be rectified and pump to be proved for satisfactory operation. in way job includes removal and re-fitment of pump in position., e-763: abnormal noise/ vibration observed from stbd sea water pump of ref plant view pump shaft and bearing worn out. defect to be rectified and proved for satisfactory operation. in way job includes removal and fitment of pump., e-764:lub oil leakage observed from port gearbox built on sea water pump tell tale hole. suspect oil seal worn out. defect to be rectified and pump to be proved for satisfactory operation. in way job includes removal and re-fitment of pump in position.

corporations/Associations/Others

CTN :41204378

04 Aug, 2025 NA

Kolkata - West Bengal

Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast

Central Government And Public Sector

CTN :41220798

18 Aug, 2025 NA

Thane - Maharashtra

Tender For supply of impeller shaft for screen wash pump as per drawing no m-17-s-30-rev-0 material - ss 316 as per astm , line shaft for screen wash pump as per drawing no m-17-s-30-rev-0 material - ss 316 as per astm a , top shaft for screen wash pump as per drawing no m-17-s-30-rev-0 material - ss 316 as per astm-a-276 , shaft coupling as per drawing no m-10- s-27-rev-0. material - ss 316 as per astm-a-276-uns- 31600

CTN :39113802

14 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of shaft sleeve , impeller , impeller nut , shaft sleeve , impeller nut , impeller nut , impeller , impeller nut , shaft , shaft sleeve , wear ring , mechanical seal part no 14350 rn 12ee000c0067 , mechanical seal , mechanical seal , mechanical seals , mechanical seals , spacer sleeves , set of lock washers , set of gaskets , set of motor bearings , set of motor bearings , set of motor bearings , set of motor bearings , set of motor bearings , set of pump bearings , set of pump bearings , set of pump bearings , shaft sleeve , impeller , shaft , lock tab washer , elastic washer w27d127bm27va4 , o ring , gasket un 65/80x12

Impeller Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector