Latest incineration service Tenders | Government incineration service Tenders

State Government

CTN :44405181

11 May, 2026 12.10 Crore

Umaria - Madhya Pradesh

Tender For corrigendum : work of re-insulation of generator rotor coils, damper segment of generator rotor unit no. 4, packing, transportation from sgtps ph-ii to firm workshop n vice versa, work of generator rotor repairing for the rectification of rotor earth of 210, sgtps - work of re-insulation of generator rotor coils & damper segment of generator rotor unit no. 4 and packing and transportation from sgtps ph-ii to firm workshop and vice versa and work of generator rotor repairing for the rectification of rotor earth fault of 210 mw unit no. 3 at ph-ii, sgtps, mppgcl, birsinghpur.

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

Central Government/Public Sector

CTN :45025069

14 May, 2026 NA

Delhi - Delhi

Tender For g 145 f:- first class 'a' free card pass, single foil. size- 3.5x5.5 inch. loose card. both side printing in hindi & english bilingual with black ink, use white pulp board 225 to 275 gsm with hatching in red. white rexine to be pasted at backside of white pulp board and printing on white rexine. inner & outer text matter in black. job is to be serially given numbered strictly as per sample. spec. :- white rexine and pulp board white 275 gsm. the art work for printing and sample card pass complete should be got approved from consignee before bulk supply. packing:- 08 to 10 bundle, each of 25 cardsshall be packed in suitable size five ply corrugated paper constructions carton box conforming to is : 2771 (part-1) 1990 with amendment no.1 and 2 and style 0620 od is : 6481/1971. the carton shall be then closed with gum paper tap 50 mm (min.) wide and finally secured by 02 nos nylon strapping of size 13mm wide each side. the edge of nylon strap shall be heat sealed overlapping each other by minimum 25 mm. packing slip must be pasted on carton box indicating po no. & other details ]

Central Government/Public Sector

CTN :45026020

19 May, 2026 NA

Delhi - Delhi

Tender For genl-99l: printed letter head pad large, containing 100 leaves. finished size 20.8 cm x30.1 cm (plus minus 2 mm tolerance). paper to be used maplitho paper 70 gsm, conforming to is 1848/2007 or latest amendments. the pad to be printed one side in single colour as per specimen.binding: one wire stitch on top as per specimen.material should be supplied in packing of 20 pad in each bundle. the art work for printing and sample workman ship should be got approved from consignee before bulk supply.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :45037673

06 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For g 145 f:- first class %u2018a%u2019 free card pass, single foil. size- 3.5x5.5 inch. loose card. both side printing in hindi & english bilingual with black ink, use white pulp board 225 to 275 gsm with hatching in red. white rexine to be pasted at backside of white pulp board and printing on white rexine. inner & outer text matter in black. job is to be serially given numbered strictly as per sample.spec. :- white rexine and pulp board white 275 gsm. the art work for printing and sample card pass complete should be got approved from consignee before bulk supply. packing:- 08 to 10 bundle, each of 25 cards shall be packed in suitable size five ply corrugated paper constructions carton box conformingto is : 2771 (part-1) 1990 with amendment no.1 and 2 and style 0620 od is : 6481/1971. the carton shall be then closed with gum paper tap 50 mm (min.) wide and finally secured by 02 nos nylon strappingof size 13mm wide each side. the edge of nylon strap shall be heat sealed overlapping each other by minimum 25 mm. packing slip must be pasted on carton box indicating po no. & other details. as per drg.no. denoting number g 145 f [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45012264

30 Apr, 2026 15.77 Lacs

Multi City - Andhra Pradesh

Tender For supply and delivery of hdpe pipes, fittings and packing rope, for maintenance to water supply in ae-8 section work division -iii area during summer season to mitigate heat wave action plan-2026. 9th call general funds

corporations/Associations/Others

CTN :45021660

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate of purchase of materials of waterworks, light and sanitary department for year 2026-27 - 40mm dia double acting air valve flange (i.s.i.), 100 mm c.i. pipe, 150 mm c.i. pipe, 350 mm c.i. pipe, 250 mm c.i. pipe, 150 mm dia c.i. sluice valve 2nd class (i.s.i. mark) ( with c.i. flange tailpiece), 80 mm dia c.i. sluice valve 2nd class (i.s.i. mark) ( with c.i. flange tailpiece), 100 mm dia c.i. sluice valve 2nd class (i.s.i. mark) ( with c.i. flange tailpiece), lead wood (sisu), rubber packing 6 mm thickness, rubber packing 6 mm thickness, c.i. collar rubber ring (50mm), c.i. collar rubber ring (63mm), c.i. collar rubber ring (90mm), c.i. collar rubber ring (110mm), c.i. collar rubber ring (125mm), c.i. collar rubber ring (140mm), c.i. collar rubber ring (160mm), c.i. collar rubber ring (250mm), high speed ‘miranda make’ hacksaw blade (12"x1/2"1), simple hacksaw blade (12"x1/2"1), 90mm c.i. collar (with nut bolt rubber ring), 110mm c.i. collar (with nut bolt rubber ring), 125mm c.i. collar (with nut bolt rubber ring), 140mm c.i. collar (with nut bolt rubber ring), 160mm c.i. collar (with nut bolt rubber ring), 250mm c.i. collar (with nut bolt rubber ring), 300mm c.i. collar (with nut bolt rubber ring), 350mm c.i. collar (with nut bolt rubber ring), 400mm c.i. collar (with nut bolt rubber ring), 450mm c.i. collar (with nut bolt rubber ring), 90mm rubber ring, 110mm rubber ring, 125mm rubber ring, 160mm rubber ring, 250mm rubber ring, 300mm rubber ring, (1/2", x 3") m.s. nut bolt full thread, (1/2", x 4") m.s. nut bolt full thread, (1/2", x 6") m.s. nut bolt full thread, (1/2", x 8") m.s. nut bolt full thread, (1/2", x 10") m.s. nut bolt full thread, 90 mm c.i. pipe mark d1 i.h.(k9/k7), 110 mm c.i. pipe mark d1 i.h.(k9/k7), 160 mm c.i. pipe mark d1 i.h.(k9/k7), 250 mm c.i. pipe mark d1 i.h.(k9/k7), 300 mm c.i. pipe mark d1 i.h.(k9/k7), price of new submersible pump/motor (complete fitting i.s.i. mark) 1/2 hp ( l&t, lubi, crompton), price of new submersible pump/motor (complete fitting i.s.i. mark) 1 hp ( l&t, lubi, crompton), price of new submersible pump/motor (complete fitting i.s.i. mark) 2 hp ( l&t, lubi, crompton), price of new submersible pump/motor (complete fitting i.s.i. mark) 5 hp ( l&t, lubi, crompton), price of new submersible pump/motor (complete fitting i.s.i. mark) 50 hp ( l&t, lubi, crompton), open well vertical pump/motor (complete fitting i.s.i. mark) 50 hp ( l&t, lubi, crompton), price of new submersible pump/motor (complete fitting i.s.i. mark) 90 hp ( l&t, lubi, crompton), prices of submersible pump repairing (1/2 hp), prices of submersible pump repairing (1 hp), prices of submersible pump repairing (2 hp), prices of submersible pump repairing (5 hp), prices of submersible pump repairing (50 hp), prices of submersible pump rewinding (1/2 hp), prices of submersible pump rewinding (1 hp), prices of submersible pump rewinding (2 hp), prices of submersible pump rewinding (5 hp), laying a new mono block motor (1/2 hp), laying a new mono block motor (1 hp), laying a new mono block motor (2 hp), laying a new mono block motor (5 hp), prices of submersible motor cable 3 core copper, prices of submersible motor cable 2 core copper, cable joint patch rubber work roll (tape role), handpump accessories, 1 1/4 handpump cylinder, material for handpump, 1/2" steel rod coupling, 1/2" steel rod, cylinder viser, handpump i.s.i / g.i. government body, flower lucky set, head body, water chamber, handpump stand, chain, bearings (6204), axle, handle, 35 mm flat cable three core coper, 150 mm d.i. pipe pusing ring, 200 mm d.i. pipe pusing ring, 250 mm d.i. pipe pusing ring, 300 mm d.i. pipe pusing ring, 350 mm d.i. pipe pusing ring, c.i./d.i. pipe m.s. clamp(thapo) 150mm, c.i./d.i. pipe m.s. clamp(thapo) 200mm, c.i./d.i. pipe m.s. clamp(thapo) 250mm, c.i./d.i. pipe m.s. clamp(thapo) 300mm, c.i./d.i. pipe m.s. clamp(thapo) 350mm, pvc pipe 25mm (6kg/cm²) i.s.i., pvc pipe 50mm (6kg/cm²) i.s.i., pvc

CTN :45010306

07 May, 2026 20.52 Lacs

Balangir - Odisha

Tender For providing of custom bid for services - loading/unloading of various types of ammunitions products duly packed in different packing boxes of wood/steel/plastic in to rail rake/explosive van/covered truck as per scope of work attached

CTN :45000965

03 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For purchasing and packing work job contractor nsc gvp

CTN :45036947

25 May, 2026 NA

Raebareli - Uttar Pradesh

Tender For mechanized cleaning of shell shop, sms shop, new shell shop, bogie shop, new bogie shop, machine shop and tool room and millwright, cmt and welding lab, wheel shop, new wheel shop, cleaning of woc (utility buildings), auxiliary sub - station blocks (ass), fire pump station, pdc, transport shop, diesel pump house, gas ward and lpg gas ward, toilet and urinal blocks, water booth and cycle/ vehicle stand, engineer blocks, shell store-ii, ward no.58 & 60, scrap yard, segregation & disposal of low value/wooden packing / zero value waste from various shops of shell group to dump yard / nominated place, management of wooden packing/ zero value scrap in dump yard, cleaning of cobweb and mechanized cleaning of side wall & pillars up to the height of 10 meters and cleaning of cobweb (roof cleaning) as per scope of work for 600 working days.

Incineration Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others