Latest inconel tube Tenders | Government inconel tube Tenders

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45521518

23 Jun, 2026 NA

Murshidabad - West Bengal

Tender For supply, delivery at site of upvc column pipe and other electro-mechanical items at nagar pwss under medb, phe dte.

corporations/Associations/Others

CTN :45494788

16 Jun, 2026 NA

Kheda - Gujarat

Tender For auction sale of scrap alternator/ starter motor,scrap ac compressor,radiator and condenser scrap with attached al pipe,e-waste with speaker,wiring harness,scrap - tyres with rim,scrap - defaced engine (4w-steel 80%),scrap - defaced engine (cv-80%steel),mix steel with chassis scrap,scrap steering column,scrap-steering rack,front shocker with spring & rear shockers,empty catcon,steel scrap - sheared body(l),bale body (bundle),doors assembly and trunk lid assembly,scrap - plastic (bumper + black pp+hd+dashboard+acralic),scrap - rubber

Central Government And Public Sector

CTN :45252649

17 Jun, 2026 NA

Kaiga - Karnataka

Tender For corrigendum : supply of domestic water pump spares e e - 1. domestic water pump spares impeller p-n- 5551 pump model - cpv1-100x80-250 , 2. pump shaft sleeve p-n- 5559 pump model - cpv1-100x80-250 , 3. gasket and packings pump model - cpv1-100x80-250 , 4. bush in lower brg bracket p-n- 5560 pump model - cpv1- 100x80-250 , 5. bush in upper bearing bracket p-n- 5560-a pump model - cpv1-100x80-250 , 6. lower shaft p-n- 5556 pump model - cpv1-100x80-250 , 7. intermediate shaft p-n- 5556-a pump model - cpv1- 100x80-250 , 8. upper shaft p-n- 5556-b pump model - cpv1-100x80-250 , 9. nut for impeller p-n- 5557 pump model - cpv1-100x80-250 , 10. locknut with washer p- n- 5585 pump model - cpv1-100x80-250 , 11. shaft coupling p-n- 5595 pump model - cpv1-100x80-250 , 12. bearing sleeve in upper brg bracket p-n- 5559-b pump model - cpv1-100x80-250 , 13. lovejoy coupling-l225 p- n- 5581 pump model - cpv1-100x80-250 , 14. strainer p- n- 5554 pump model - cpv1-100x80-250 , 15. adaptor p- n- 5555 pump model - cpv1-100x80-250 , 16. ball bearing 3309a-2rs1-c3-mt33 p-n- 5585 pump model - cpv1-100x80-250 , 17. casing p-n- 5552 pump model - cpv1-100x80-250 , 18. bearing housing p-n- 5573 pump model - cpv1-100x80-250 , 19. oil seal in bearing cover p-n- 5584 pump model - cpv1-100x80-250 , 20. impeller key p-n- 5586 pump model - cpv1-100x80-250 , 21. oil seal in upper bearing bracket p-n- 5594 pump model - cpv1-100x80-250 , 22. lower bearing bracket p-n- 5562 pump model - cpv1-100x80-250 , 23. upper bearing bracket p-n- 5571 pump model - cpv1-100x80-250 , 24. bearing cover p-n- 5574 pump model - cpv1-100x80-250 , 25. shaft coupling key p-n- 5596-a pump model - cpv1- 100x80-250 , 26. upper column pipe p-n- 5564-b pump model - cpv1-100x80-250 , 27. intermediate column pipe p-n- 5564-a pump model - cpv1-100x80-250 , 28. bottom column pipe p-n- 5564 pump model - cpv1- 100x80-250 , 29. suction housing p-n- 5553 pump model - cpv1-100x80-251 , 30. split ring for shaft coupling p-n- 5596 pump model - cpv1-100x80-250 , 31. impeller p-n- 5651 pump model - cpv 1-150-100-250 , 32. pump shaft sleeve p-n- 5659 pump model - cpv 1-150-100-250 , 33. ball bearing 3309a-2rs1-c3-mt33 p-n- 5683 pump model - cpv 1-150-100-250 , 34. gaskets and packings pump model - cpv 1-150-100-250. each set of gasket consist of 3 nos. gasket. , 35. adaptor p-n- 5655 pump model - cpv 1-150-100-250 , 36. lower shaft p-n- 5656 pump model - cpv 1-150-100-250 , 37. intermediate shaft p-n- 5656-a pump model - cpv 1-150-100-250 , 38. upper shaft p-n- 5656-b pump model - cpv 1-150-100-250 , 39. nut for impeller p-n- 5657 pump model - cpv 1-150- 100-250 , 40. bush in lower brg bracket and casing p-n- 5660 pump model - cpv 1-150-100-250 , 41. bush in upper bearing bracket p-n- 5660-a pump model - cpv 1- 150-100-250 , 42. locknut with washer p-n- 5685 pump model - cpv 1-150-100-250 , 43. bearing sleeve p-n- 5659-a pump model - cpv 1-150-100-250 , 44. bearing sleeve in upper brg bracket p-n- 5659-b pump model - cpv 1-150-100-250 , 45. strainer p-n- 5654 pump model - cpv 1-150-100-250 //bid details 2 / 39

CTN :45332769

15 Jun, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of submersible pump - 12.5 hp control panel for submersible pump motor assembly , long pvc strainers as per tender , 8 inch dia schl 40 pvc pipe , 3 inch dia ci reflux valve flange type , 6 inch dia schl 80 pvc pipe , 3 inch dia ci sluice valve is flange type , 3 inch dia ms clamp sets complete for column pipe holding , ms tube well cover heavy duty as per tender , submersible pump installation charges , 3 inch dia ci adopter for column pipe jointing , 4 sq mm 3 core wet type flat cable , 3 inch dia gi fittings flanges , submersible pump and accessories , standard pvc column pipe as per tender , pressure gauge with cock complete , pvc nipple as per tender , pvc reducing socket as per tender , supply and carrying charges of pea size washed gravels , 16 mm galvanized metal wire rope

CTN :45492471

19 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of steering column assy , brush carrier assy , air pressure governer , repair kit trailer control valve , pole screw , repair kit consists of 17 items , pipe exhaust

Central Government And Public Sector

CTN :45213404

11 Jun, 2026 2.45 Lacs

Jaipur - Rajasthan

Tender For bid to ras supply of 5 hp borewell submersible motor pump set , 50 mm dia lead free upvc column pipe , 12 mm dia double twisted nylon rope , 3 core 2.5 sq. mm flexible flat submersible cooper conductor cable , 50 mm dia gate valve of class 1 non rising stem type , 50 mm dia b class gi pipe , providing fixing suitable m.s. sheet bore well cover with nut bolt etc as reqd. , ms clamps for holding submersible pump and delivery pipe line , 3 hp mono block pump set , 50 mm dia foot valve , 40 mm dia gate valve of class 1 non rising stem type , 40 mm dia vertical lift check valve of class 1 , 40 mm dia upvc pipe , 50 mm dia upvc pipe , 63 a tpn disconnector fuse switch unit , 63 a 415 volt 4 strip copper bus bar chamber , pump controller , 4 x10 sqmm alu cable , 4 x10 sqmm brass compression gland , 6 swg dia g.i. wire on surface or in recess

Central Government/Public Sector

CTN :45401129

11 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : f9azs00084-machining of cloumn pipe upper,cansiter,thrust bearing pedestal,foundation ring - machining of column pipe upper m/c - 144rnd 660&800mw, cep canister-en8h32 (without dished end), thrust bearing pedestal m/c , 144rnd, foundation ring assly-en7h32

CTN :45329436

13 Jun, 2026 2.48 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair to pumping machinery of 5 cusec vt pump set of unit iv along with extension of column pipe and other allied works at lis katal batal

Inconel Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector