Latest indicator meter Tenders | Government indicator meter Tenders

Central Government / Public Sector

CTN :40295195

15 May, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply, design, fabrication and fitment for set of 3 items consisting of gravity based coil springs rolling c hutes for lhb & icf and coil springs storage table crs/tpty as per drg no-scr/crs.j&t.no-283 attached at annexure-a and quantity as mentioned below. 1. lhb coil spring rolling chute (1 table-2.5 meter)-8 nos. 2. icf coil spring rolling ch ute (1 table-2.5 meters)-12 nos. 3. coil springs storage tables- (square table- 2.5 meter)- 07 nos. make: chaitanya or e quivalent. [ warranty period: 30 months after the date of delivery ]

CTN :40265060

28 May, 2025 2.70 Crore

Bilaspur - Chhattisgarh

Tender For construction of pressurized pipe system to supply water for solar micro irrigation to deliver at farmers field up to 1 ha with a duty of 0.84 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for micro pressurized irrigation (drip/sprinkler) by rotation in distt. bilaspur in 44 ha. in kharif and 44 ha. in rabi (right side of barar anicut as indicated in index map), out of total gross command area 100 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of barar anicut as indicated in the index map for micro irrigation system without exceeding total power requirement for solar pumps with solar panel of 250 kw. it includes all activities starting from survey, investigation, designing, estimating costing, procurement, construction, laying, installing, energizing, etc. of pumping system, rising and gravity mains, main line, branch lines, distribution network, controlling and regulation system etc. for supply of filtered water for irrigation under pressure. the work also includes formation of fpo as per company act/rule, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work. mou between agency and fpo to operate scheme after 05 years of mom and dl period and to arrange linkage facility to the fpo.

Central Government / Public Sector

CTN :40256500

14 May, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply, design, fabrication and fitment for set of 3 items consisting of gravity based coil springs rolling c hutes for lhb & icf and coil springs storage table crs/tpty as per drg no-scr/crs.j&t.no-283 attached at annexure-a and quantity as mentioned below. 1. lhb coil spring rolling chute (1 table-2.5 meter)-8 nos. 2. icf coil spring rolling ch ute (1 table-2.5 meters)-12 nos. 3. coil springs storage tables- (square table- 2.5 meter)- 07 nos. make: chaitanya or e quivalent. [ warranty period: 30 months after the date of delivery ]

CTN :40218965

13 May, 2025 52.49 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 1 qc subdivision kibbanahalli - supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve bras frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning 20cm dia bras frame sieves with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning lechatelier flask - used for the determination of specific gravity of hydraulic cements as specified in is4031-ii, aim-401 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning digital thermometer range-50 to 280 deg c , aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., suply, instalation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., suply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, aim-414 with all lead and lift complete as per direction of the engineer-in-charge of work., spply, instalation, testing and comisioning vicat apparatus with isi certification mark is5513 fitted in aluminium box. item code aim-394 with all lead and lift complete as per specifiations and directions of the engineer-in-charge of work., suply, installation, testing and commisioning le-chatelier mould, with isi certification mark is 5514, each (resistance of mould test apparatus). supplied complete with over weight 300g +/- 1 g item code aim-400 with all lead and lift complete as per direction of the engineer-in-charge of work., suply, instalation, testing and commisioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per direction of the engineer-in-charge of work., suply of heating glove with all lead and lift complete as per direction of the engineer-in-charge of work., suply, installation, testing and comissioning swell test apparatus as per is2720 (part 16

CTN :40218968

13 May, 2025 53.37 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 3 qc subdivision yediyur - supply, instalation, testing and commisioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. aim-161 with all lead and lift complete as per direction of the engineer-in-charge of work., supply, installation, testing and commissioning sample tray (enamel tray), size 200x150x30mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and commisioning sample tray (enamel tray), size 300x250x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and commisioning sample tray (enamel tray), size 450x300x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commisioning sample tray (enamel tray), size 600x450x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply of sample tray (enamel tray), size 50x500x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel-as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, there by checking its strength. aim-110-ms with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. calcium carbide reagent, moisture gauge, 0-25% x 0.5%, digital balance, 50g, steel balls, 12.7mm dia and 25mm dia, scoop, cleaning brush, aluminum dish. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning micro oven with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.6mm, item codeaim-05338 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.70mm, item codeaim-05308 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 2.00mm , item cod

CTN :40194203

16 May, 2025 NA

Kokrajhar - Assam

Tender For tender for supply of safranine staining solution 125ml , compound microscope with led lamp , cotton blue 25gm , slides boxes for 100 slides , specimens , cover slips box english glass 22x22 square , inoculating loop , bunsen bumer , spirit lamp , binocular microscope , crystal violet 125ml , gram iodine stain solution 125ml , potato dextrose agar , ethanol , herbarium sheets 50 pieces , stopwatch or timer , balance scale digital balance 2 digit , scissors or pruning shears , calipers digital , weighing machine digital balance 3 digit , fast green 125ml , xylene ar 500ml , dpx mountant for biochemistry 250ml , balsam canada 100ml , glycerine 500ml , watch glass 4inch dzn , oven , incubator 14x14 , refrigerator , magnetic stirrer with hot plate , ph stips box , cavity tile 12 cavity , ph meter lt-10 , deep freezer 300 ltr , centrifuge machine 6000 rpm , digital colorimeter , ocular micrometer , stage micrometer , scalpel , razor blade , fine forceps , stirring rod , vorter mixer , graduated pipettes , droppers , test tubes 15x125 box , test tube rack -16mmx60tubes , beakers 250ml , hemocytometer , water bath 12 hole digital , chemicals all x 25 , extra preserved speceimen , digital balance 2 digit , digital balance 3 digit , digital ph meter with electrode , digital photo colorimeter , water distillation plant , heating mental with regulator 500 ml , hot air oven , test tube , beaker 250ml , beaker 500ml , conical flask 250ml , conical flask 500ml , chemical thermometer , round bottom flask 250 ml , measuring cylinder 50ml , measuring cylinder 100ml , filter paper , burette 50ml , pipette 25ml , bloating paper , flame photometer , electrical conductivity meter , specific gravity bottle , desiccators , digital melting point apparatus , stalgnometer , viscometer , digital potentiometer with electrode , kipps apparatus , spectrophotometer , polarimeter , weighing bottle , volumetric flask 250ml , buchner funnel , separating funnel 250ml , whatman filter paper , petridisc , mortar and pastel , digital multimeter of big display , dc voltmeter 0- 25volts , dc voltmeter 0-10volts , dc multimeter 0-25ma , dc ammeter 0-3amp , newton ring complete set with transformer , mercury lamp with transformer , determination of young modulus of a wire by optical lever method , rc coupled amplifier experiment trainer board , dual power supply , calender and barne constant flow method , digital oscilloscope dso , meter bridge of good quality , plane diffraction gratting , bar pendulum , kater pendulum , optical bench , de sauty bridge set up , potentiometer , to show the tunneling effect in tunnel diode , b-h curve of fe using solenoid and determine energy , copper connecting wires , vernier callipers , prism , fractional resistance , determination of moment of inertia of a flywheel , meter scale , capillary tube , key 1 way or 2way , spectrometer , thermocouple trainer kit , spirit level , plank constant photo electric cell set up with filters , 8085 microprocessor , opamp , tuning fork , series and parallel lcr circuit , compass needle , two junctions of a thermocouple with temperature , solar and photo cell characteristics kit vi , bar magnet , verify the malus law for plane polarized , function generator 1mhz , screw gauge , travelling microscope , rheostat , sextant for height measurement , stop watch , solenoid , p-n junction diode characteristic apparatus , resistance box , zener diode , diffraction grating with 1500 lpi , he-ne laser , sodium lamp with vertical box , convex lens , concave lens , plano convex lens , acordc battery eliminator , breadboard , jumper wires for breadboard , hall effect set up , four probe complete set up , gm counter , compound microscope , autoclave 50 ltr , incubator , ph meter , digital colony counter , vortex shaker for test tube , water bath digital , haemocytometer , haemoglobinometer , plankton net and collection vial , gel doc , electrophoresis , electrophoresis power supply , microtome blade , microtome ,

CTN :40194225

16 May, 2025 NA

Kokrajhar - Assam

Tender For supply of digital multimeter of big display , dc voltmeter 0-25volts , dc voltmeter 0-10volts , dc multimeter 0-25ma , dc ammeter 0-3amp , determination of wavelength sodium , mercury lamp with transformer , determination of young modulus of a wire , rc coupled amplifier experiment trainer board , dual power supply , calender and barne constant flow method , digital oscilloscope dso , meter bridge of good quality , plane diffraction gratting , bar pendulum , kater pendulum , optical bench , de sauty bridge set up , potentiometer , to show the tunneling effect in tunnel diode , to draw the b-h curve of fe using solenoid , copper connecting wires , vernier callipers , prism , fractional resistance , determination of moment of inertia of a flywheel , meter scale , capillary tube , key 1 way or 2way , spectrometer , thermocouple trainer kit , spirit level , plank constant photo electric cell set up , 8085 microprocessor , opamp , tuning fork , carry foster bridge , series and parallel lcr circuit , compass needle , study of variation of thermo emf across two junctions , solar and photo cell characteristics kit , bar magnet , verify the malus law for plane polarized , function generator 10mhz , screw gauge , travelling microscope , rheostat , sextant for height measurement , stop watch , solenoid , p-n junction diode characteristic apparatus , resistance box , zener diode , diffraction grating with 1500 lpi , digital balance 2 digit , digital balance 3 digit , digital ph meter with electrode , digital photo colorimeter , centrifuge machine 6000 rpm , water distillation plant , magnetic stirrer with hot plate , heating mental with regulator 500 ml , hot air oven , refrigerator , test tube , beaker 250ml , beaker 500ml , conical flask 250ml , chemical thermometer , round bottom flask 250 ml , measuring cylinder 50ml , measuring cylinder 100ml , filter paper , burette 50ml , pipette 25ml , bloating paper , flame photometer , electrical conductivity meter , specific gravity bottle , desiccators , digital melting point apparatus , stalgnometer , viscometer , digital potentiometer with electrode , kipps apparatus , compound microscope , binocular microscope , autoclave 50 ltr , incubator , deep freezer 300 ltr , digital colorimeter , ph meter , digital colony counter , vortex shaker for test tube , water bath digital , inoculating loop , bunsen burner , spirit lamp , soil thermometer , anemometer , lux meter , haemocytometer , haemoglobinometer , plankton net and collection vial bid details/ 2 / 91

corporations/Associations/Others

CTN :40098622

14 May, 2025 50.00 Lacs

Ranchi - Jharkhand

Tender For supply of pathology department equipments - coagulometer , magnifying lens , blood pressure instrument , automatic timer , balance for weighing organs , slide boxes , x-ray viewing box , drill for boring glass , sternal puncture needle adult size , sternal puncture needle child size , liver biopsy needle , stop watch , ph meter electric , electrophoresis , specimen jars , surgical instruments , glassware , automatic urine analyzer , microscopes , sp gravity measure , ph meter , incubator , haemacytometers , staining jars for slides , centrifuge tubes graduated , graduated cylinders , pipettes , reagent bottles , dropping bottles , balances

Indicator Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

corporations/Associations/Others