Latest indicator plate Tenders | Government indicator plate Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government/Public Sector

CTN :45004499

04 May, 2026 1.10 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs vijit; h719 single track rail assembly end plate holding bracket deteriorated and one fastener sheared off at helo deck holding bracket to be renewed alongwith fas..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs vijit; h720 dressing line wire rope end connecting eye splice joint deteriorated and broken end connecting eye to be fabricated alongwith renewal of thimble eye ma..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs vijit; h721 securing foundation of high pressure deck washing machine deteriorated and thinned down at boat deck securing foundation to be renewed and washing mach..,repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs vijit; h722 wooden steps and ropes of jumping ladder deteriorated and damaged due to prolonged use jumping ladder to be renewed as per sample size of step 520mm x 1..

CTN :43994967

07 May, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

Central Government/Public Sector

CTN :45000768

04 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. ms/ci/gi item scrap consisting of signal items, ground connection, lock rod, point machine parts, loco parts, gears, slide cover, cams, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, rottery key, grill, pulley, air filter, fencing, hood, boiler tube, winch wheel, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder, connecting rod, signal posts ,bearing case, tension rod, cam shaft,ms cut pieces,pipes, pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component,trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery. 4).material available in first location have to be removed first. location: in two locotion:1)b-2 and w-48,below camera of scrap yard/ssd/ptj.

State Government

CTN :44982542

11 May, 2026 NA

Dapodi - Maharashtra

Tender For supply of high mast - pipe , bracket , sheet , pole , plate , foundation , battery , led light , solar pannel

Central Government/Public Sector

CTN :44908463

25 Apr, 2026 NA

Medak-T - Telangana

Tender For corrigendum : fabrication and machining of base plate, outer casing, casing suction discharge , foundation ring assly, head piece assly and motor stool

Central Government/Public Sector

CTN :44905698

27 Apr, 2026 5.60 Lacs

Baikunthpur - Chhattisgarh

Tender For strengthening of existing plate form for diesel generator set and foundation of exhaust chimney for 1x1010 kv dg at pandavpara mine at jhilimili sub area of baikunthpur area

CTN :44598696

10 Apr, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of as per ts , gate size 3 mx 2m double leaf frame made of angle iron 75x 75x6mm isi grade with shutters made of reinforcement tmt bar 12 mm dia as per ts , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac or equivalent , white lime , cement based paint snowcem of make berger or asian or nerolac or equivalent , three phase 1point 2 hp monoblock pump 430 volt complete and incl 3 mtr length required size flexible suction pipe foot valve as per ts , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia 2 point 5 mtr , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , non woven geotextile 500gsm as seperation layer between wall and pvc mebbrance with provision of pvc disk and anchor faster for wall as per ts , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness minus 2 mm 5parcentage as per ts , non woven geotextile 500gsm as protective layer of pvc water proofing membrance with provision of high quality adhesive as per ts , non woven geotextile 500gsm as seperation layer between foundation and pvc mebbrance properties of geotextile 500 gms as per ts , non woven geotextile 500gsm as protective layer of pvc membrance properties of geotextile 500gsm properties of for wall as per ts , non woven geotextile 500gsm as seperation layer between deck slab and pvc mebbrance properties of geotextile 500 gms as per ts , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane as per ts , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive as per ts , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , pvc pipe 75 mm dia 3 mtr long make prince finolex supreme

corporations/Associations/Others

CTN :44721081

22 Apr, 2026 55.84 Lacs

Ernakulam - Kerala

Tender For supply of supply, installation, testing, and commissioning of 125 kva diesel generator set as per the technical specification attached. duly dismantling the existing 50kva dg set for ers , supply and laying of 3.5 x 150 sqmm aluminium armoured cable with glands and termination for ers territory. , supply and laying of 3.5 x 95 sqmm aluminium armoured cable with glands and termination for ers territory. , earth pit with earth chamber, 2x2 copper plate with 1.5 inch dia with 2mtr long gi pipe b class and suitable size of trench, compound, termination, for ers territory. , supply and laying of 1.5 x 4 core ug cable for using ats function, for ers territory. , 25x3 swg copper strip for using earth conductor, for ers territory. , gsb generator switch board with 200 a mccb as incomer and 2nos 125a mccb as out going with suitable size of busbar and enclosure, for ers territory. , double compression gland for ers territory. , 16 sq.mm copper wire for ers territory. , 16 mm, 4 inch exhaust pipe extension with ms pipe for ers territory. , removal of existing amf panel and fixing of 2nos ats panel for ers territory. , supply of 100 amps ats panel for ers territory , existing dg foundation extension workfor ers territory. , electrical inspectorate scheme preparation, site inspection fee, testing, etc for ers territory. , supply of 15kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of 25kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of 50 kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of materials for provision of concrete foundation for dg set as per site requirement for sbc , installation of concrete foundation for dg set as per site requirement for sbc , installation of dg set on the foundation for dg set for sbc , supply and termination of power cable on amf panel, dg sets and ac main distribution panel for dg set including trenching and laying as per site requirement for sbc , supplying and installation of earthing material for three pits for dg set for sbc

CTN :44721174

11 Apr, 2026 12.61 Lacs

Kamrup - Assam

Tender For supply of high mast light and misc items d d - providing and fixing of 16 meters high mast lighting tower for large area with 08 led flood light luminaires , providing and fixing of 10 meters high mast lighting tower for large area with 12 led flood light luminaires , led bulb 9w , copper chemical earthing with complete wire and materials , rubber adhesive providing and fixing of 16 meters high mast lighting tower for large area with 08 led flood light luminaires,octagonal pole construction with metal protection treatment of fabricated mast section, hot dip galvanised as per is:4759 latest, octagonal pole sheet thickness 3 mm, material of octagonal pole high tensile steel, 01 nos of longitudinal welds, type of welding is submerged arc welding process, internal distance between parallel faces at the base of pole 175, 01 no of section,internal distance between parallel faces at the top of pole 70, grades of high tensile steel ish430la as per is:5986 (grade 355), cross section of octagonal pole (no of sides) octagonal, with no door opening, width of base plate 300 mm, number of nuts for each pole 1, foundation bolt type j type en 8 grade, bolts and nuts are conforming to specication as per is:1363 - grade a, base plate material mild steel fe 410 conforming to is : 2062, necessary accessories on each pole foundation bolts,nuts, washers, instruction manuals, bolt size m24x750, thickness of base plate 16 mm, number of washer per bolt for each pole 2, number of bolts for each pole 4, foundation bolts and nuts and octagonal pole shall be galvanized as per is:4759 (latest), length of base plate 300 mm, earthing terminals on the base of the pole, for lightning and electrical protection, regional wind withstand capacity which the pole structure support is suitable to withstand (in m/s) 47, the designed life of the pole shall be 25 years, terminal box ) /bid number : gem/2026/b/7398300 * /dated: 01-04-2026 & & / bid document 1 / 15

Indicator Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others