Latest induction motor scrap Tenders | Government induction motor scrap Tenders

Central Government/Public Sector

CTN :45265927

25 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of speed prob housing (machined) for wap7/wag9 traction motor type 6fra 6068 to clw spec no. 4tms.096.068 rev.2 alt-2 or latest and clw drg. no.- 1twd.096.077 alt-5 or latest , abb document no-3ehm 11880 or latest with reference date as tender closing date. (latest alteration/revision of specification/drawing will be acceptable with reference date as tender closing date.) [ warranty period: 30months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Central Government And Public Sector

CTN :45267072

12 Jun, 2026 NA

Bangalore - Karnataka

Tender For helical inline gear motor to the model no. sk973.1-112mp/4 tf of make m/s nord or substantially equivalent with following features: input speed(rpm): 1440; output speed(rpm): 15; gear ratio: 94.96; power (kw): 4; service factor: 1.3; output torque: 2519 nm; overhung load: 23.6 kn; axial load: 22 kn; motor inverter speed range: standard line powered inverter capable; voltage: 400/690 v; frequency: 50 hz; efficiency class: ie3; current 1: 7.85 a; current 2: 4.53 a; cosinus: 0.83; motor duty: s1 - continuous; enclosure: ip55; insulation class: f; mounting pos - m1; housing material: cast iron housing; type of housing: foot mount; output shaft: solid keyed shaft; output shaft (dia x length): 60x120 mm; output shaft material: standard; gearbox breather options: auto vent; gearbox sealing options: fkm seals; bearing design: standard bearings; motor cooling: tefc - totally enclosed fan cooled; motor thermal protection: thermistor; motor option: fluoro rubber motor seals. note: - i. material of construction: fabricated steel housing (stress relieved) ii. all gears shall be manufactured from steel forgings or rolled bar made from steel 17cr ni mo6/18cr ni mo6 (case hardening steel). iii. all gears shall be case hardened to 58-62 hrc and profile ground. iv. output shaft shall be of en 9 material normalized to 201 bhn (min) v. bearing used shall be rollingelement type of make skf/ntn/timken/fag only. special conditions: a) only authorised license manufacturers of gear boxes or their authorised dealers shall participate in the tender and must furnish an authorizedlicense or dealer certificate at the time of technical scrutiny. b) mtc and heat treatment shall be submitted along with the supply. c)warranty: the material shall have a warranty of 12 months from the date of installation or 18 months from the date of supply, whichever is earlier d)above specified materials are the minimum required standard to be considered while desiging the gear motor. [ warranty period: 18 months after the date of delivery ] ]

CTN :45252855

28 May, 2026 NA

Siliguri - West Bengal

Tender For tender for supply of lv7 tmb 2523-0715-0104 cold start pilot kit , lv7 tmb 2754-2910-0127 assy sleeve cyl , lv7 tmb 2867-4210-0175 assy spring brake actuator type 16 56 , lv7 tmb 2752-2540-0105 cover assy 1 75 inch spline dia , lv7 tmb 2573-4311-0125 assy brake master cyl 31 8x75 strokes , lv7 tmb 2530-017910 assy master cylinder 25 4 dia , lv7 tmb 2574-1500-9910 starter motor 12v make tvs lucas steel , lv7 tmb 2523-2310-0101 steering pump , lv7 tata 3501-030-9113 spanner deac 9x11 , lv7 tmb 322-337-0118 bearing housing , lv7 tmb 2060-3210-7144 leaf 7th , lv7 tmb 2525-0714-0129 pressure line 6th cyl

CTN :45002542

21 May, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras tender for supply of timing device piston , pump housing , governor shaft , repair kit water pump major , starter engine electrical , assy face side lh , main leaf with bush , drive shaft , assy jerricane carrier frame , fixing bracket assy , pressure plate assy , delivery valve holder , pushing electromagnet , filter fuel , bearing tappered roller , major kit starter motor 12v consisting o

CTN :45024826

22 May, 2026 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply of boq23 d d - harness assy wiring no.1 , gasket cylinder head , spring assy rear lh , joint assy axle shaft lh , switch assy starting motor , oil seal , lever assy parking brake , gasket set , housing starter , back assy rh , end steering tie rod , yoke reverse shaft , bush , horn assy high , bearing input shaft

CTN :45260246

29 May, 2026 NA

Panchkula - Haryana

Tender For supply of mounting eng front , box assy steering gear , gasket cyl head , body assy throttle , dual brake valve , ignition switch , spg brake chamber repair kit , sub assy clutch housing , armature , gear fly wheel ring , field coil assy , chain and sprocket kit , door lock assy rh , wiper motor , water pump , slave cyl assy

CTN :44961942

26 May, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

CTN :45252644

29 May, 2026 NA

Ambala - Haryana

Tender For supply of rpav chasis , omni directional antenna assembly with housing set , propellers set of 12 props , 32 pin nav cam cable , gimble pitch motor , vio navigation camera , vio navigation camera lens , antenna base mount , arm lock stoppers hardstop set , bldc motor complete set with esc , vio dome

CTN :45224880

08 Jun, 2026 1.47 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For supply of cylinder linner , main and big end bearing 0.10 us , kit piston ring pin circlip , bearing connecting rod , valve stem guide , valve intake , valve exhaust , thrust washer upper , thrust washer lower , bush connecting rod , came shaft bush , temprature sensor unit , oil seal front , oil seal rear , fly wheel assy , fly wheel bush , valve seal , oil pump assy , oil filter , water pump , thermo state valve , belt alternator , oil pressure switch , insulator front , clutch driven plate , clutch cover assy , clutch release brg , assy clutch master cyl , clutch sleeve cyl , hose radiator , hose radiator outlet , air filter assy , ball end assy acc cable , filter plate with hand primer , thrust plate cam shaft , engine overhauling gasket , housing water pump inlet , tv damper pulley , brkt compressor , egr pipe short , egr diffuser pipe , egr pipe long -e iii , egr pipe long bsiv , starter moter , ac compresser 138 cc , alternator assy without vacuum pump , insulator engine front , brkt alternator , brkt engine mtg. front rh , brkt engine mtg. front lh , husing water pump inlet , egr cooler , hose egr cooler out let , shaft intermediate front axle , shaft fin front axle , cover motor assy front motor assy , gas strut hood , cable assy hood ) /bid number : gem/2026/b/7548765 * /dated: 16-05-2026 & & / bid document 1 / 43

Central Government And Public Sector

CTN :45255394

09 Jun, 2026 NA

Bangalore - Karnataka

Tender For helical worm gearmotor for long conveyor b shop and stn-4 main outgoing chip conveyors machine chip conveyor to model no-sk 42125-100lp/4 tf of m/s nodes and loads or equivalent 1) acceptable make of gear box-nodes and loads,power build,new allen berry,shanthi gears, sew.2) acceptable make of motor-abb,bharath bijlee,nodes and loads,siemens,crompton greaves,sew ,technical specification: 1) power -2.2 kw, 2) input speed-1460 rpm ,3) output speed-19 rpm ,4) ratio-76.95 ,5) output torque- 894 nm, 6) voltage-230/400 v, 7) frequency-50hz ,8) efficiency class-ie3 ,9) enclosure-ip55, 10)type of housing-foot mount, 11) mounting position-m4(should be capable for horizontal and vertical mounting without any modification) ,12) output shaft-solid keyed shaft,13) output shaft diameter-60 x 120mm. 14) motor cooling -tefc 15) service factor-2.5. 16) the motor used shall be without any modification either on shaft/ flange.17) mounting hole to hole -180mm x 200 mm.18) mounting hole dia-22mm.19) warranty: 18 months from the date of supply or 12 months from the date of commissioning. 20) motor inverter speed range standard line powered - inverter capable(motor should be designed to work with vfd in the range 25hz to 65hz. 21) base weight-125 kg maximum. 22) the overall length shall not exceed 700 mm. 23)gear motor should be unicase(housing (casing) is made as a single, integral unit) type. special conditions 1)the offerer shall furnish technical specification catalogue/data sheet duly indicating dimensional details, torque value and motor details during tender participation and along with material supply.2) only authorized dealers or manufactures of above mentioned makes shall participate in tender.3) drawing of modelno- sk 42125-100lp/4 tf is attached for reference only. [ warranty period: 18 months after the date of delivery ] ]

Induction Motor Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector