Latest industrial paint Tenders | Government industrial paint Tenders

CTN :45511939

02 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of angle iron picket , ms flat of size 40 x 6mm length 2 point 10m long , barbed wire , chain link fence shall be fabricated using hot down gi wire of dia 4mm and size of mesh 50x50mm including two line wire , ms nut and bolt 10x50mm with two washers of 3mm thickness , 600mm dia punched type concertina coil , gi binding wire 0 point 9 mm dia , ms round bar 03 nos 10mm dia 4 point 20m long , synthetic enamel paint of og colour 1st quality , zinc chromate primer , thinner , paint brush 3 inch , paint brush 2 inch , fd protection barrier relocatable hesco basket

CTN :45509503

27 Jun, 2026 19.60 Lacs

Jahazpur - Rajasthan

Tender For supply of equipment for establishment of smart classroom and commissioning work government college, jahazpur, district bhilwara- 75" inch ultra hd interactive flat panel display , digital podium with mini pc , full hd visalizer , ptz camera , 5-kva online ups , installation, stc,cables and training , chairs for student with writing pad , table for teacher , high back chair for teacher , air conditioner 2 ton , networking and other electrification works per workstation , miscellaneous expenses 1.for hard disks, pen drives stationary item including paper rims, cartridge refill 2.for furnishing of the room lioleum / wooden /flooring, curtains, paint

CTN :45501837

28 Jun, 2026 19.60 Lacs

Bhilwara - Rajasthan

Tender For nit 152 for supply of equipment for establishment of smart classroom and commissioning- 75" inch ultra hd interactive flat panel display , digital podium with mini pc , full hd visualizer , ptz camera , 5-kva online ups , installation, sitc,cables and training , chairs for student with writing pad , table for teacher , high back chair for teacher , air conditioner 2 ton , networking and other electrification works per workstation , miscellaneous expenses , 1. for hard disks, pen drives stationary item including paper rims,cartridge refill , 2. for furnishing of the room lioleum/wooden/flooring,curtains,paint

CTN :45504003

27 Jun, 2026 19.60 Lacs

Bhilwara - Rajasthan

Tender For nit 152 for supply of equipment for establishment of smart classroom and commissioning-- 75" inch ultra hd interactive flat panel display , digital podium with mini pc , full hd visualizer , ptz camera , 5-kva online ups , installation, sitc, cables and training , chairs for student with writing pad , table for teacher , high back chair for teacher , air conditioner 2 ton , networking and other electrification works per workstation , miscellaneous expenses , 1.for hard disks, pen drives stationary item including paper rims, cartridge refill , 2.for furnishing of the room lioleum/wooden/flooring, curtains,paint

CTN :45500985

27 Jun, 2026 19.60 Lacs

Bikaner - Rajasthan

Tender For smart class room-- 75" inch interactive flat panel display , digital podium with desktop , 5 kva online ups , ptz camera , dsp and audio mixer , power amplifier , handheld mic , lavalier microphone , wall/ceiling speakers , student chair with writing pad , table (teacher) , high back chair (teacher) , air conditioner 2 ton , networking, electrification, paint wall (room size 34*28*11.6 ft.), furnishing of the room linoleum/ wooden flooring (room size 34*28 ft.), pvc penal false ceiling (room size 34*28 ft.) & fluted pvc penal one side wall (size 14*10 ft.), curtains (window3, 5*5.5 ft. and entry door2, 9*5 ft.) etc.

CTN :45497691

27 Jun, 2026 19.60 Lacs

Bikaner - Rajasthan

Tender For supply of smart class room - 75" inch interactive flat panel display, digital podium with desktop, 5 kva online ups, ptz camera, dsp and audio mixer, power amplifier, handheld mic, lavalier microphone, wall/ceiling speakers, student chair with writing pad, table (teacher), high back chair (teacher), air conditioner 2 ton, networking, electrification, paint wall (room size 34*28*11.6 ft.), furnishing of the room linoleum/ wooden flooring (room size 34*28 ft.), pvc penal false ceiling (room size 34*28 ft.) & fluted pvc penal one side wall (size 14*10 ft.), curtains (window3, 5*5.5 ft. and entry door2, 9*5 ft.) etc.

CTN :45499722

01 Jul, 2026 NA

Jalandhar - Punjab

Tender For supply of with rexine cover suitable for chair wrting cushion , plywood commercial bwr 8 feet x 4feet x 4mm thck , plywood commercial bwr 8feet x 4 feet x 9mm thick , looking mirror for table dressing gents 760x380x5mm , lock for almirah med steel 75mm , telescopic channel 12inch long , cp handle for table bed side size 4inch , fevicol sh , touch wood , bow handle 100mm for table writing , light sealer nc sanding , caster wheel for chair revolving , teakwood beading 5mm thick 18mm wide , pvc bush for bed hard , handle ss for locker steel , paint synthetic enamel white , pvc bush for table bedside 18mm , french polish , spirit dentured best quality , plywood commercial bwr 6feet x 4feet x 6mm , good quality tapestry cloth for sofa cushion 48 inch wide , pvc arms for chair computer , fevicol sr , handle cp for almirah steel 100mm , pvc handle sitable for chair writing , paint synthetic enamel olive green , regmar patta , cloth malmal , pvc shoe for chair and table with screw , knob for table or drawers , screw 75mm of 100 nos flat head , turpentine oil , mirror for table dressing ladies of size 1200mm x 760mm x 5 mm , magnetic catcher for dressing mirror , thinner , screw wood 35mm of 100 nos phillips head , rubber bush for chair vearandah , screw wood 45mm of 100 nos phillips head , varnish , screw wood steel 50mm of 100 nos flat head , rexine 48inch wide , lock for almirah 50mm , piano type hinges 3 by 4 inch 6 feet length , screw wood steel 30mm of 100 nos phillips head , paint synthetic enamel black , paint synthetic enamal smoke grey , screw wood steel 65mm of 100 nos flat head , paint brush 50mm , screw wood steel 25mm of 100 nos phillips head , screw wood steel 40mm of 100 nos phillips head , nails wire 75mm , paint brush 75mm , nails wire 32mm headless , nails wire 50mm , yellow mitti for furniture polishing , palmet patti pack of 10 nos , nails wire 50mm , emery paper no-120 , emery paper no-100 , nails wire 20mm , nails wire 40mm , nails wire 1 by 2 inch head less , nails wire 100mm , bow handle ss 100mm , paint brush 25mm , hasp and staple 100 mm , nails wire 60mm , emery paper 60 grade , nails wire 15mm , nails wire 25mm , hacksaw blade 1 inch wide , steel butt hinges 50mm , emery paper 220 , emery paper no50 , teakwood beading 5mm thick 25mm wide , emery paper no150 plywood commercial bwr 7feet x 3 feet x12mm, plywood commercial bwr 6feet x 4feet x 12mm, pvc seat and back for chair varandah , sofa cusion with cover 21 inch x 22 inch x4 inch 40 density, pvc seat for chair dining suitable , plywood commercial bwr one side teak face 8 feet x 4 feet x 4mm, plywood commercial bwr 8 feet x 4 feet x 12mm thick, pre laminated particle board 9 feet x 6 feet x 18mm thick, prelaminated board of exterrior quality 2400 x 1200 mm x18mm thick, plywood commercial bwr 8feet x 4 feet x 19mm, plywood commercial bwr one side teakface 8 feet x 4 feet x 12mm , plywood commercial bwr teakface 8 feet x 4 feet x 6mm, leg of charpoy gi pipe 32mm and 408mm length duly threaded at one end, good quality tapestry cover duly stitched for sofa cushion 550x525x100mm , mirror for dressing table 1200mmx 600mmx5mm, cusion with cover suitable for stool dressing ladies , long rail gi 2100mm x 32mm for gi chorpoy both ends duly threaded, shocker hydraulic spindle for chair revolving, seat cushioned foam 21inchx22inchx4inch 40 density suitable for sofa, block board of size 8 feet x 4 feet x 18mm thick, cushion seat with rexine cover suitbale for chair dining , short rail gi 330mm x 32mm for gi chorpoy both side duly //bid details 2 / 80

State Government

CTN :45492697

24 Jun, 2026 NA

Dhar - Madhya Pradesh

Tender For supply of cupboard name plate , emery wheel 4 inch , k type cupboard handle , cupboard lever plate , cupboard lock brass 50 mm , hss drill bit 3 by 8 inch , hss drill bit 2 mm , hss drill bit 11 mm , hss drill bit 6 mm , hss drill bit 8 mm , hss drill bit 10 mm , hss drill bit 1 by 8 inch , tap set bsw 3 by 16 , tap set bsw 10 mm , ms net , mirror frame 12x48 inch , mirror glass 12x48 inch , table grinder wheel 200x25x31.75 mm , crc round pipe 1 inch , crc square pipe 16x16 mm , crc square pipe 50x50 mm , crc rectangular pipe 50x25 mm , crc round pipe 30 mm , ms square pipe 3x3 inch , round file set , flat file , round file 8 inch , ball peen hammer set , bp sheet 4 mm , measuring tape 5 meter , transformer oil , safety shoes , welding goggles black , copper rod spot welding , grease , engine oil 20w40 , spray gun , brasso metal polish , white pencil , paint brush 2 and 4 inch , air compressor pipe , ms nut bolt 5 inch x 10 mm , ms nut bolt 5 inch x 12 mm , l chopani , sitamber , dhar chopani , pullar

CTN :45506329

22 Jun, 2026 1.30 Lacs

Kupwara - Jammu And Kashmir

Tender For supply of ply wood , wick flat 16 mm , paint green , masala box , bucket ss , ecgs 500 dark brown , com hair , paint black , screw driver

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

Industrial Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government