Latest infrared lamp Tenders | Government infrared lamp Tenders

CTN :45730578

22 Jul, 2026 NA

Howrah - West Bengal

Tender For upgradation of pit lights and yard lighting arrangements with associated wiring and cabling work at tikiapara coaching yard and sorting yard coaching complex.

CTN :45602272

02 Jul, 2026 1.20 Lacs

Dehradun - Uttarakhand

Tender For corrigendum : supply of omron nebulizer bracket c nine hundred oblique nec nine hundred bracket , electronic digital weighing machine fitelo , electric infrared lamp or heat therapy lamp for pain relief table lamp , ecg paper for bpl model dash nine thousand one hundred eight , ecg gel , one touch select plus fifty strips bracket for blood sugar bracket , one touch select plus fifty lancets , hot water bag or bottle non-electric for pain relief with cover , bpl b nineteen digital blood pressure monitor , bpl f four non contact infrared thermometer , bpl ultima prime multipara monitor bracket code hs four thousand one hundred twenty nine bracket , phenyl one ltr pack , phool jhadu , pocha cloth , room freshner two hundred twenty ml , shampoo half ltr , softspun microfiber cloth forty into forty cm , toilet cleaner liquid one ltr , toilet cleaning brush , tyre polish five hundred ml pack , wiper floor cleaning with handle , lizol half ltr pack * /bid number : gem/2026/b/7661248 + /dated: 18-06-2026 ' ' / bid document 1 / 20

CTN :45419373

06 Jul, 2026 14.10 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For corrigendum : labour charges for laying of copper tape , labour charges for making earth pit , labour charges for fixing of lighting arrester at the top of the tower including cost of nuts and bolts. , labour charges for removal of old earthing , transportation of earthing materials from sri vijayapuram to aerial bay by bus or boat or cargo vehicle. , transportation of earthing materials from aerial bay to east island jetty including dinghi hire charges along with safety boat. , labour charges for transportation of earthing materials from shore to lighthouse. , transportation of earthing materials from sri vijayapuram to aerial bay by busorboator cargo vehicle. , transportaion of earthing materials from aerial bay to ross island port cornwallis including dinghi hire charges along with safety boat. , transportation of earthing materials from sri vijayapuram to mayabunder by busorboator cargo vehicle. , transportation of earthing materials from mayabunder to aves island including dinghi hire charges along with safety boat. , transportation of earthing materials from sri vijayapuram to sir huge ross island by hiring mechanized dinghi along with safety boat. , transportation of earthing materials from sri vijayapuram to north bay island by hiring mechanized dinghi along with safety boat. , transportation of earthing materials from sri vijayapuram to chidiyatapu beach by cargo vehicle. , labour charges for transportation of earthing materials from chidiyatapu shore to lighthouse including etc. as required , transportation of earthing materials from sri vijayapuram to north cinque island by hiring mechanized dinghi along with safety boat. , transportation of earthing materials from shore to site including labour etc. , transportation of earthing materials from sri vijayapuram to little andaman jetty by cargo vessel. , transportation of earthing materials from jetty to lighthouse site including vehicle hire charges, labour etc. , transportation of earthing materials from sri vijayapuram to car nicobar jetty by cargo vessel. , transportation of earthing materials from sri vijayapuram to katchal east jetty by cargo vessel. , transportation of earthing materials from jetty to site including vehicle hire charges, labour etc. , transportation of earthing materials from sri vijayapuram to campbell bay jetty by cargo vessel. , hiring of mechanized dinghy from campbell bay to rosen point for transportation of men and materials etc. as required.

CTN :45689212

10 Jul, 2026 NA

Panchkula - Haryana

Tender For supply of sponge forcep , mayo scissor , dissecting scissor , deaver scissor , roller bandage , heating pad , mackintosh sheet , iv stand , infrared lamp , surgical tray , ecg gel , digital thermometer , digital blood pressure machine , ecg paper roll , hospital bed sheet with pillow cover , crepe bandage , philadelphia cervical collar , antimicrobial hand wash , disposable syringe 5 ml

CTN :45666562

14 Jul, 2026 NA

Thumba - Kerala

Tender For infrared lamps

CTN :45357233

17 Jun, 2026 3.50 Lacs

Imphal - Manipur

Tender For bid to ras corrigendum : supply of lightning conductor : : - lighting conductor , earthing electrode , copper prongs , copper ball , aluminium rod , pvc insulated cover , insulated clamp , pvc conduit pipe , aluminium strip , nut and bolt , gi plate , aluminium lugs , pcc pit , dia pipe , funnel , gi strip , termination point , earth resitance tester , pcc bricks , sand , stone agg , cement

Central Government/Public Sector

CTN :45535093

24 Jun, 2026 7.18 Lacs

Dhanbad - Jharkhand

Tender For (a) complete repairing/rewinding of one no.500 kva 3.3kv/550 volt power transformer sl.no.lph/tr/12 at 1 pit lodna colliery and (b) complete repairing/rewinding of one no.400 kva 3.3kv/440 volt lighting transformer sl.no.lph/tr/13 at 1 pit lodna col

Central Government/Public Sector

CTN :45252253

17 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , install, replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , install, replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

Infrared Lamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government