Latest injection test kit Tenders | Government injection test kit Tenders

Central Government/Public Sector

CTN :42965263

29 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of replacement of lt incoming panels at various locations and cable termination d d - room panel-2 as per technical spec and sow. , supply of gas operator room panel-3 as per technical spec and sow. , install, replacement, testing and commissioning of gas operator room panel-3 as per technical spec and sow. , supply of 3. 5c x 400 sq. mm aluminum cable. ss4 to gas operator room as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5c x 400 sq. mm aluminum cable. ss4 to gas operator room as per technical spec and sow. , supply of 3. 5cx 70 sq. mm aluminum cable. ss4 to fire service dept. as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5cx 70 sq. mm aluminum cable. ss4 to fire service dept. as per technical spec and sow. , supply of 3. 5c x 25 sq. mm cable. pump house 1 to pump house operator room as per technical spec and sow. , laying, fixing, testing and commissioning of 3. 5c x 25 sq. mm cable. pump house 1 to pump house operator room as per technical spec and sow. , supply part for end termination. as per technical spec and sow. , service part for end termination. as per technical spec and sow. , supply part for new earthings with 75mm ci cast iron pipe and gi flat as per is standards 3043 and as per technical spec and sow , service part for new earthings with 75mm ci cast iron pipe and gi flat as per is standards 3043 and as per technical spec and sow , supply of gi flat 25 x 6mm necessary joints with nut and bolts from earth pit to panel boards. as per technical spec and sow. , laying of gi flat 25 x 6mm necessary joints with nut and bolts from earth pit to panel boards. as per technical spec and sow. , civil works - breaking of existing concrete and excavate the cable trench up to 60cm depth provide sand 45mm thick lay the3. 5 core 400sq. mm lt 1. 1kv ss4-gas operator room , civil works - breaking of existing black top road and excavate the cable trench up to 60 cm depth provide sand 45mm thick lay the 3. 5 core 70sq. mm lt. ss4 to fire service dept. , a. foundations for lt panels at all locations, b. creation of power room for lt panels in gas operator room with al partition

CTN :43252277

26 Dec, 2025 9.22 Lacs

Koppal - Karnataka

Tender For purchasing of instruments of electrical items to check quality of cement soil and concrete items to pre sub divison koppal - digital marshall apparatus, 50 kn for 4 dia sample., universal penetrometer for bitumen, measuring cylinder, graduated, polycarbonate, capacity 1000 ml., measuring cylinder, graduated, polycarbonate, capacity 500 ml, essential extra rammer 4.9 kg x 450 mm controlled drop, essential extra compaction mould 150 mm id, 127.3 mm height 2250 ml volume, complete with collar and base plate made of mild steel, compaction mould 100 mm id, 127.3 mm height 100 ml volume, complete with collar and base plate, made of mild steel, pycnometer, each, digital thermometer range -50 to 280 dec c, centrifuge extractor, capacity 1500 g electrically operated., mu compression testing machine, servo-controlled, capacity 2000 kn supplied with nabl calibration certificate., slump test apparatus with testing rod and base plate., sand pouring cylinder appartus 100 mm., core cutter apparatus supplied with 100 mm dia core cutter, steel dolly and rammer 1 no each., essential extra adapter for 30 cm dia sieves (suitable for 20 cm dia and 30 cm dia sieves only), sieve shaker, motorised, with built-in-digital timer., pan and cover for 20 cm dia sieves, sieve brass frame 20 cm dia x 75 microns, sieve brass frame 20 cm dia x 90 microns, sieve brass frame 20 cm dia x 150 microns, sieve brass frame 20 cm dia x 300 microns, sieve brass frame 20 cm dia x 600 microns, sieve brass frame 20 cm dia x 1.18 mm, sieve brass frame 20 cm dia x 2.36 mm, fine mesh sieves 20 cm dia brass frame sieve brass frame 20 cm dia x 4.75 mm, pan and cover for 30 cm dia sieves, sieve g.i. frame 30cm dia x 2.36mm, sieve g.i. frame 30cm dia x 4.75mm, sieve g.i. frame 30 cm dia x 10 mm, sieve g.i. frame 30cm dia x12.5mm, sieve g.i. frame 30cm dia x 20mm, sieve g.i. frame 30cm dia x 40mm, sieve g.i. frame 30cm dia x 63mm

State Government

CTN :43274968

29 Dec, 2025 1.49 Lacs

Alappuzha - Kerala

Tender For deposit-khri-concrete and structures lab-installation of new universal testing machine and other allied works in concrete and structures lab , khri-general electrical work

Central Government/Public Sector

CTN :43252686

09 Jan, 2026 71.84 Lacs

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means , filling by brought out excavated earth , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand floors , providing and laying in position specified grade of reinforced cement concrete , shuttering in foundations , shuttering in superstructure columns , steel reinforcement for rcc , applying priming coats with primer , wall painting with acrylic emulsion paint , structural steel work riveted , brick work with common fly ash bricks , half brick masonry with non modular fly ash bricks , 15 mm cement plaster with mix , providing frosted glass panes 4 mm thick , neat cement punning. , painting with synthetic enamel paint , finishing walls with acrylic smooth exterior paint , providing and laying ceramic glazed floor tiles , providing and laying 60mm thick factory made cement concrete paver block , 6 mm cement plaster of mix , providing and fixing on wall face unplasticised rigid pvc rain water pipes , grading roof for water proofing treatment , making soak pit , providing and fixing gi , do gi pipe 20m dia , do gi pipe 25m dia , do gi pipe 40m dia , providing and fixing white vitreous china pedestal type , providing and fixing white vitreous china wash basin , providing and fixing precoated galvanised steel sheet roofing accessories , supplying and applying two coats of white wash , providing and placing on terrace polyethylene water storage tank , providing and fixing ptmt pillar cock , providing and fixing on wall face un plasticised rigid pvc swr , providing and fixing brass bibcock , providing and fixing mirror of superior glass , providing and fixing cp brass shower rose , providing and fixing cp brass shower valve rose , clearing jungle , 30 mm thick factory made polyvinyl chloride , supplying chemical emulsion , providing and applying white cement based putty , laying of one number pvc , supplying and fixing cable route marker , supplying and making end termination , supplying and fixing of following ways surface , supplying and fixing following rating , supplying and fixing dp sheet steel enclosure , supply of exhaust fan , installation of exhaust fan , supply of ceiling fan , installation testing and commissioning of ceiling fan , supply of ceiling fan regulators , supplying of led lights 20w , supplying of led lights 36w , supply of amps switch piano switch , supply of socket , supply of switch , supply of socket outlet , supplying and fixing 3 pin required. , supplying and fixing suitable size gi box , wiring for circuit submain wiring , wiring for circuit/ submain wiring alongwith earth wire , installation testing commissioning of wall bracket , providing and fixing danger notice plate , supplying and fixing metal box , supplying and fixing metal box , providing & fixing fixing metal box , earthing with copper earth plate , providing and fixing 25 gi , providing and fixing of lightning conductor finial , providing and fixing , providing and fixing gi , providing and fixing gi

CTN :43225953

07 Jan, 2026 5.00 Lacs

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included

CTN :43222718

26 Dec, 2025 NA

Paradip - Odisha

Tender For manufacturing, testing ,supply and delivery of ready mix concrete (rmc) at our coit-composite works - nrl, paradip, jagatsinghpur, odisha

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

CTN :43202678

26 Dec, 2025 50.0 Thousand

Visakhapatnam - Andhra Pradesh

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - civil; crack width measurement in reinforcement concrete structures, leak testing facility; any other government approved labs /service providers

corporations/Associations/Others

CTN :43216745

24 Dec, 2025 NA

Banda - Uttar Pradesh

Tender For auction sale of rheostat, 2.5/5a,cfb test set,dimmer state,zfb relay test kit,insulation tester, hand held,multimeter, digital,indicator, phase sequence,ct primary injection test kit,brief case,common meter reading instrument,lock, with key,cable, common meter reading instrument

State Government

CTN :43191079

24 Dec, 2025 4.74 Lacs

Una-Hp - Himachal Pradesh

Tender For (sh-laying , jointing and testing of gms pipe main line to new ohsr in choti kutia dismantle cement concrete and re-construction in distribution system) under js sub division tahliwal (section bathu) rd 0 to 1002 mtr

Injection Test Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government