Latest inlet tube Tenders | Government inlet tube Tenders

State Government

CTN :45539768

23 Jun, 2026 7.00 Lacs

Bikaner - Rajasthan

Tender For procurement of various size c.i. detachable joints for pvc/hdpe pipe at divisional store of executive engineer phed pdr division iii bikaner

CTN :45551640

29 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of sq mm single core with standard copper , wire 10 sqmm 2 core , angle holder with skirt obr white black , acrylic sheet size of 4 ftx3 ftx3mm , agg 20 mm , agg 40 mm , agg 80 mm , black paint , bricks red , cgi sheet 10 ft , cgi sheet 12 ft , cgi sheet 2400mm 8 ft , chain link mesh 50x50x2 mtr , distemper , drill machine adopter 8mm , floor coat terricotta , floor tile 400x400mm , gate valve 25mm , hdpe pipe 10mm , iron cutter blade 14 inch , ismb 150 of rsj 150 x 75mm 20 ft long , kero heater wicks large , ldpe sheet , paint brush 125mm , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint og , paint po red , pbs roll , pcc hollow block , pcc solid block , ply wood of size 8ftx4ft and 12mm thick , ply wood of size 8ftx4ft and 19mm thick , ragmall , red oxide primer , sand , sand bag , satin white paint , self taping screw 25mm , self taping screw 50mm , smoke grey paint , srt size 1270mm x 613mm x 180mm , srt size 1630mm x 613mm x 180mm , srt size 1700mm x 613mm x 180mm , stainless steel lavotary pan , steel door size 900 x 1800mm , surf powder , synthetic enamel paint colour golden brown in 20 ltr container , synthetic enamel paint colour yellow in 20 ltr container , tape insulation 2 cm , tarpaulin canvas 30 x 30 ft , tarpaulin plastic 20 x 20 ft , tarpaulin plastic 30 x 30 ft , tile 300x300mm , tmt steel bar 10 mm , water storage tank 1000 ltr , water storage tank 2000 ltr , water storage tank 500 ltr , white paint , zypsum screw 25mm ms screw 25mm of 100 nos per pkt , ply wood grade bwp of size 6ftx 3ft and 12mm as per tech spec , ply wood grade bwp of size 8ftx 4ft and 6mm thick as per tech spec , ply wood grade bwp of size 8fx 4ft and 12mm thick as per tech spec , ply wood grade bwp of size 8ftx 4ft x19mm as per tech spec , ppgi sheet of size 10ft x 3ft x 0.63mm thick as per tech spec , ppgi sheet of size 12 ft x 3 ft x 0.63mm thick as per tech spec , steel roofing trough srt of size 1630 mm x 613 mm x 180 mm as per tech spec , steel roofing trough srt of size 1700 x 613 x 180mm as per tech spec , steel roofing trough srt of size 1270 x 613 x 180mm as per tech spec , ismb 150 of rsj 150 x 75mm 3.5 m long as per tech spec , ismb 150 of rsj 150 x 75mm 4.9 mtr long as per tech spec , ismb 150 rsj 150 x 75mm 5.80m as per tech spec , hdpe sand bag of size 75 x 40 cm, sand colour and each bag having weight not less than 60 gms , anti missile screen of size 2.00 x 0.90m as per tech spec , m sand confriming to is 383 - 1997 as per tech spec , aggregate 20mm as per tech spec , aggregate 40mm , pbs roll self finished tarfelt as per tech spec att , pcc hollow blocks 400 mm x 200 mm x 200 mm as per tech spec , load bearing concrete solid blocks of size 400mm x 200 mm x 200 mm as per tech spec , tmt bar 10mm , tmt bar 12 mm dia , tmt bar 16mm , brick sub class b , steel loop hole 610 mm x 330 mm as per tech spec , tiles chequered 400x400mm , bitumen for filling of expansion joints of pcc , fire extinguisher 2 kg as per tech spec , cgi sheet of size 10 ft x 3 ft x 0.63mm thick as per tech spec , cgi sheet of size 12n ft as per tech spec , cgi sheet of size 8 ft x 3 ft x 0.63mm thick as per tech spec , punched tape concertina coil including spike and handle with 50 turns and dia 1050mm as per tech spec //bid details 2 / 87

State Government

CTN :45521564

23 Jun, 2026 7.00 Lacs

Bikaner - Rajasthan

Tender For procurement of various size c.i. detachable joints for pvc/hdpe pipe at divisional store of executive engineer phed pdr division iii bikaner

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45483697

24 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of long isi marked medium , gi clamp half inch dia , gi clamp 3 oblique 4 inch dia , gi clamp 1 inch dia , gi tank nipple half inch dia , gi tank nipple 3 oblique 4 inch dia , gi barrel nipple half inch dia comma 2 inch long , gi barrel nipple half inch dia comma 4 inch long , gi barrel nipple half inch dia comma 6 inch long , gi barrel nipple 3 oblique 4 inch dia comma 4 inch long , gi barrel nipple 3 oblique 4 inch dia comma 2 inch long , gi barrel nipple 1 inch dia comma 4 inch long , gi barrel nipple 1 inch dia comma 6 inch long , gi barrel nipple 32 mm comma 4 inch long , gi barrel nipple 32 mm comma 6 inch long , gi barrel nipple 40 mm dia comma 4 inch long , gi barrel nipple 40 mm dia comma 6 inch long , gi barrel nipple 50 mm dia comma 4 inch long , gi barrel nipple 50 mm dia comma 6 inch long , gi three way elbow 1 point 25 inch , gi three way elbow 1 inch , cp chrome plated concealed stop cock off cut 3 oblique 4 inch 380 gms weight plus minus 10 , cp chrome plated concealed stop cock off cut half inch 380 gms weight plus minus 10 , cp pillar cock half inch 380 gms weight plus minus 10 , cp stop cock angle type half inch dia heavy duty brass material , cp stop cock half dia two in one oblique two way heavy duty brass material , cp bib cock half inch dia off heavy duty , cp bib cock off cut 15 mm dia off cutt with wall flange , cp bib cock 15 mm dia 2 in 1 , cp angle stop cock 15 mm dia size 5 no heavy duty as per sample , pcv waste coupling 40 mm dia as per sample , brass gate valve 1 inch dia h oblique d isi marked , brass gate valve 3 oblique 4 inch dia h oblique d isi marked , brass gate valve half inch dia h oblique d isi marked , brass gate valve 1 point 5 inch dia h oblique d isi marked , brass gate valve 2 inch dia h oblique d isi marked , pcv waste coupling 32 mm dia as per sample , spindel for pillar cock 15 mm no size 5 full cut and half cut two types , spindel for pillar cock 15 mm no size 4 full cut and half cut two types , gi union 50 mm , gi union 40 mm , gi union 20 mm , gi union 25 mm , gi union 15 mm , brass non return valve 40 mm as per sample , brass non return valve 50 mm as per sample , bib cock 15 mm flanger washer two types as per sample , bib cock washer 15 mm per pkt 100 nos as per sample , connection pipe washer per pack 100 nos , pvc european wc cover white , pvc out let pipe 32 mm 3 feet long , handle for flush tank as per sample , suction pump for clearing blockage bath oblique toilet 3 inch dia oblique blockage rubber hand pump , geyser connection pipe half inch dia 2 ft long , geyser connection pipe half inch dia 1point 5 ft long , suction pipe corrugated green colour 2 inch dia , pvc urinal waste pipe , pvc wash basin waste pipe , sintex cover with clamp for tank 500 ltr , sintex tank 500 ltr triple layer , upvc elbow brass 3 oblique 4 inch x half inch mm dia , pvc elbow 63 mm dia , pvc elbow 75 mm dia , pvc elbow 110 mm dia , upvc socket brass 3 oblique 4 inch x half inch mm dia , pvc tee 75 mm dia , pvc y joint 75 mm dia , pvc floor trap 75 mm dia , pvc flush tank 10 ltr capacity full set , plastic grip plug 2 inch length , plastic grip wall plug 5 inch length 100 each , pvc float valve 20 mm as per sample , pvc pipe 110 mm dia 6 mtr long , hdpe black dwc sewerage and drainage 150 mm dia 6 mtr long , upvc pipe 40 mm dia 3 m long heavy duty , pvc pipe 75 mm dia 3 m long heavy duty , hdpe hose pipe 40 m dia , hdpe hose pipe 50 m dia , hdpe two side hose groove nipple 40 m dia , hdpe two side hose groove nipple 50 m dia , hose pipe clamp 1 inch dia , hose pipe clamp 2 inch dia , hose pipe clamp 40 mm dia , u pvc solvet for joints 200 ml as per sample , pvc solvet for joints 100 ml as per //bid details 2 / 116 sample , pvc adaptor 63 mm x 50 mm ft oblique mt as per sample , pvc elbow cover joint 75 mm dia , pvc elbow cover joint 100 mm dia , pvc clamps 63 mm , pvc connection pipe 15 mm 1 point 5 feet length , pvc flush tank washer as per sample , pvc elbow 40 mm , pvc foot valve 5

State Government

CTN :45466515

15 Jun, 2026 21.53 Lacs

Multi City - Chhattisgarh

Tender For balance work of construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt. (35% balance work) at kaneli including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber & providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia upvc class 06/10 kg/sqcm pipe, 63/75 mm dia hdpe class 06 kg/sqcm pipe with suitable joints, valve specials and all fittings including all allied civil works, including electric connection from cspdcl, road cutting, switch room cum pump house, information board, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room, providing functional household tap connection (f.h.t.c) in individual households and government institution etc. complete with 03 months trial run, operation & maintenance for 06 months under single village of piped water supply scheme under jal jeevan mission for village kaneli, korkotti, hanaikalkal block manpur district- mohla-manpur-a.chowki .

State Government

CTN :45466518

15 Jun, 2026 72.28 Lacs

Multi City - Chhattisgarh

Tender For balance work of construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 15 mt. (85% balance work) at sherpar & 40 kl capacities & staging 12 mt. (65% balance work) at kakaipar including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber & providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia upvc class 06/10 kg/sqcm pipe, 63/75 mm dia hdpe class 06 kg/sqcm pipe with suitable joints, valve specials and all fittings including all allied civil works, including electric connection from cspdcl, road cutting, switch room cum pump house, information board, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room, providing functional household tap connection (f.h.t.c) in individual households and government institution etc. complete with 03 months trial run, operation & maintenance for 06 months under single village of piped water supply scheme under jal jeevan mission for village chapatola, sherpar, kakaipar block mohla district- mohla-manpur-a.chowki .

State Government

CTN :45466522

15 Jun, 2026 61.38 Lacs

Multi City - Chhattisgarh

Tender For balance work of construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 15 mt. (100% balance work) at munjal, 50 kl capacities & staging 12 mt. (16% balance work) at jhitiya & 40 kl capacities & staging 12 mt. (65% balance work) at khadkhadi including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber & providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia upvc class 06/10 kg/sqcm pipe, 63/75 mm dia hdpe class 06 kg/sqcm pipe with suitable joints, valve specials and all fittings including all allied civil works, including electric connection from cspdcl, road cutting, switch room cum pump house, information board, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room, providing functional household tap connection (f.h.t.c) in individual households and government institution etc. complete with 03 months trial run, operation & maintenance for 06 months under single village of piped water supply scheme under jal jeevan mission for village munjal, jhitiya, khadkhadi block a.chowki district- mohla-manpur-a.chowki .

CTN :45441003

11 Jun, 2026 4.22 Lacs

Multi City - Andhra Pradesh

Tender For macherla municipality - general fund - 1st call - supply and delivery of hdpe pipe lines of various sizes and cid joints of various sizes in macherla municipality.

CTN :45441004

11 Jun, 2026 4.98 Lacs

Multi City - Andhra Pradesh

Tender For macherla municipality - general fund - 1st call - supply and delivery of hdpe pipe lines of various sizes and cid joints of various sizes in macherla municipality.

Inlet Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

State Government

State Government