Latest insert turning Tenders | Government insert turning Tenders

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45042593

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of depot ferrous scrap - pl no. 98050448, scrap m.s. consisting of box wagon body cutting, pipe, rod, nut-bolt, slack adjuster, hand wheel, control rod, bogie end pull rod, side bearer, channel, angle, wagon door and other box wagon body cutting parts available on the lot.[excluding steel wagon door & steel plate, knuckle, pivot, adopter if available on the lot.]

Central Government/Public Sector

CTN :45050145

13 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of slack adjuster (bottom short end) to clw drg.no. 01/3/19/30 alt-3 ref- 1, 2 & 3 [ warrantyperiod: 30 months after the date of delivery ]

CTN :45025124

18 May, 2026 NA

West Tripura - Tripura

Tender For supply of key ignition for strome , assy vacuum hose for strome , alternator belt for strome , suspension bush set for strome , fuse kit for strome , hand brake cable for strome , gasket cyl head for strome , slave cylinder for als , slack adjuster for tata , suspension bush set for maruti , gear shift for tata

Central Government/Public Sector

CTN :45049528

14 May, 2026 NA

Yamunanagar - Haryana

Tender For slack adjuster type-irsa-600 j (complete) . drawing no :- wd-90002-s-01-rc, alt. 2, item no. 1 to 50 . spec no :- 07-abr-1992 with amendment no. 5. inspection :- further all the necessary inspections shall be carried out as per rdso spec. no. 07-abr-92, amend. no. 5 guarantee :-for a period of 36 months from the date of supply or 24 months after putting into service, which ever is earlier. [ warranty period: 36 months after the date of delivery ]

Corporations And Associations And Others

CTN :45031423

14 May, 2026 NA

Multi City - Telangana

Tender For automatic slack adjusters

corporations/Associations/Others

CTN :44907308

14 May, 2026 4.03 Crore

Bengaluru - Karnataka

Tender For procurement of spare parts required for maintenance of tata & leyland bsvi vehicles. - gasket,exhaust manifold - tt bsvi, gasket-exhaust manifold for h-series engines - ll bsvi, companion flange - ll bsvi, water pump assembly - tt bsvi, oil seal outer rear - ll bsvi, oil seal rear outer - ll bsvi, push rod repair kit - ll bsvi, drag link assy ashwamedha - ll bsvi, s/a for nox sensor - ll bsvi, engine speed sensor for crs engines - ll bsvi, temperature sensor - tt bsvi-a046p415, sensor,pressure - tt bsvi, sensor,position - tt bsvi, pressure/temperature sensor bs3/4 - tt bsvi, pressure sensor - ll bsvi, sensor-ambient temperature adblue tank -alb - ll bsvi, auto slack adjuster straight - tt bsvi, auto slack adjuster 160cd 16 offset rh - tt bsvi, auto slack adjuster 160cd 16 offset lh - tt bsvi, slack adjuster rear rh - ll bsvi, slack adjuster rear lh - ll bsvi, slack adjuster front rh/lh - ll bsvi, mc kit major - tt bsvi, m c kit minor - tt bsvi, air dryer -repair kit - tt bsvi, ac head - tt bsvi, ddu minor repair kit - tt bsvi, clutch master cylinder - tt bsvi, clutch booster assy - tt bsvi, cl m.c. assy w/ reservoir - tt bsvi, cl booster repair kit - tt bsvi, clutch master repair kit - ll bsvi, repair kit- ll bsvi, ac head - ll bsvi, clutch servo assy - ll bsvi, clutch master cylinder - ll bsvi-2705252239-4700530650, apda assy with parallel system protection valve - ll bsvi, air compressor assay cyl block kit - ll bsvi, m c assy - ll bsvi, m c kit - ll bsvi, hyd pressure relief valve - ll bsvi, clutch booster (tvs girling make) - ll bsvi, clutch servo repair kit - ll bsvi - ll bsvi, repair kit - hand brake valve (msp 3/93) - ll bsvi, repair kit dual brake valve (msp 6/51) - ll bsvi, repair kit of brake chambers (msp 25/84) - ll bsvi, hose assy - tt bsvi, bent hose pipe - tt bsvi, set 6ldat+reducer hose bs2/3/4 - tt bsvi, hose,flexible - tt bsvi, air brake hose with anti kink spring - tt bsvi, rear brake hose - ll bsvi, front brake hose - ll bsvi, hose-air brake front 600mm length with spring guard / straight and elbow end m18x1.5 - ll bsvi., hose-air brake front 600mm length with spring guard / straight and elbow end m18x1.5 - ll bsvi, pressure pipe assy at gearbox end - rane hfb 64 for mdv bs6 migration - ll bsvi, return hose assy at gear end for viking bs6 - ll bsvi, engine mounting front - ll bsvi, hose-straight hump cac outlet polybond - h6 - ll bsvi, hose-straight hump cac inlet polybond - h6 - ll bsvi, hose-single bend radiator outlet - ll bsvi, hose-multi bend radiator inlet- e+3 h6 - ll bsvi, hose-multi bend -viking h6 - ll bsvi, radiator assembly - tt bsvi, radiator -mdv e+3 viking h6 - ll bsvi, thermostat - ll bsvi, shift cable - tt bsvi, manifold, exhaust - tt bsvi, gear box cable select - ll bsvi, gear box cable shift - ll bsvi, fly wheel ring - tt bsvi, fly wheel - tt bsvi, gear flywheel ring - ll bsvi, hp pipe - rail to injector 2 - ll bsvi, hp pipe - rail to injector 3 - ll bsvi, hp pipe - rail to injector 1 - ll bsvi, hp pipe - rail to injector 6 - ll bsvi, hp pipe - rail to injector 4 - ll bsvi, hp pipe - rail to injector 5 - ll bsvi, metering valve - ll bsvi, gasket,exhaust manifold - tt bsvi, gasket-exhaust manifold for h-series engines - ll bsvi, companion flange - ll bsvi, water pump assembly - tt bsvi, oil seal outer rear - ll bsvi, oil seal rear outer - ll bsvi, push rod repair kit - ll bsvi, drag link assy ashwamedha - ll bsvi, s/a for nox sensor - ll bsvi, engine speed sensor for crs engines - ll bsvi, temperature sensor - tt bsvi-a046p415, sensor,pressure - tt bsvi, sensor,position - tt bsvi, pressure/temperature sensor bs3/4 - tt bsvi, pressure sensor - ll bsvi, sensor-ambient temperature adblue tank -alb - ll bsvi, auto slack adjuster straight - tt bsvi, auto slack adjuster 160cd 16 offset rh - tt bsvi, auto slack adjuster 160cd 16 offset lh - tt bsvi, slack adjuster rear rh - ll bsvi, slack adjuster rear lh - ll bsvi, slack adjuster front rh/lh - ll bsvi, mc kit major - tt bsvi, m c kit minor -

Insert Turning Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others