Latest insert drill Tenders | Government insert drill Tenders

CTN :43055173

15 Dec, 2025 5.35 Lacs

Bokaro - Jharkhand

Tender For rep. of idm30 drill sl. no. 201906938. - item description/ heading, rep. of pivot axle and mounting bracket both side, rep. of mast tower rest platform and exhaust silencer., rep. of mast cylinder eye., rep. of track assy. both sides, rep. of roller guard & guard mounting., rep. of idler assy. both sides., rep. and fitment of track chain., rep. of operator cabin door., rep. of ladder and hand railing., rep. of battery box and battery clamp., total impact of gst for the purpose of ctc

Central Government/Public Sector

CTN :41568105

04 Dec, 2025 NA

Bangalore - Karnataka

Tender For bid to ras bid to ras supply of item# 1. collet body (10n28) for wp 18/hw 18 torch, 3.2 mm , item# 2. collet (10n25) for wp 18/hw 18 torch, 3.2 mm , item# 3. collet body 3.2 mm dia , item# 4. aluminium wire 1/8 or 3mm , item# 5. argon gas regulator with flow meter single stage , item# 6. taper shank twist drill 1" conforming to is: 5103- 1969, hss, m42. dia , item# 7. drill bit 10 mm hss, m42 grade, straight/parallel shank 10 , item# 8. pneumatic engraving pen overall length-125-170 mm, impact rate , item# 9. letter punch size: 5/32" or 4 mm (set of 27) , item# 10. number punch size: 1/4" or 6mm , item# 11. extended straight die grinder. / extended straight die grinder. , item# 12. pneumatic die grinder specification: collet size: 6 mm or 1/4" , , item# 13. extended pneumatic die grinder specification: collet size: 6 mm, motor power: , item# 14. pneumatic die grinder collet size: 6mm or 1/4" , motor: 0.3 hp (min) , , item# 15. pencil grinder straight pencil die grinder with 1/8" collet, 80000 , item# 16. pure tungsten electrodes 3.2 mm , item# 17. straight tool holder fh16, rpm: 5000 to 12000 rpm: 5000 to 12000 t , item# 18. flexible shaft to be suitable for flexible shaft grinder , item# 19. flexible shaft grinder spec: -1kw capacity, gear box: 7 speed gear box(r , item# 20. pneumatic die grinder specification: collet size: 6mm or " , motor: , item# 21. right angle pneumatic die grinder specification: collect size: 6 mm or 1/4" , f

CTN :42914947

09 Dec, 2025 NA

Mandala - Madhya Pradesh

Tender For supply of orthopedic implant over all rate will be considered as l1 not seprate item rate - ortho implants, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper schanz pin 6.5mm, telescopic nail (all size), telescopic rods (8", 10", 12"), tensioner / dynamometer, threaded rods (4",

Central Government/Public Sector

CTN :42948156

18 Dec, 2025 3.14 Crore

Bangalore - Karnataka

Tender For tender for supply of nut plate drill motor with accessories and cutters : : - nut plate drill motor with one set of accessories for anchor nut part no din65344-bc05d. , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 1. , drill cum countersink cutter solid carbide drill diameter 2.4 mmcountersink rivet head diameter 4.63 mm suitable for cfc material and anchor nut part nodin65344-bc05d. , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.4 mm countersink rivet head diameter4.63 mm suitable for aluminium material and anchor nut part no din65344-bc05d. , nutplate drill motor with one set of accessories for anchor nut part no din65344-bc06d. , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 5. , drill cum countersink cutter solid carbide drill diameter2.4 mm countersink rivet head diameter4.63mm suitable for cfc material and anchor nut part nodin65344-bc06d. , driil cum countersink cutter hss m42(8percentageco) drill diameter2.4 mm countersink rivet head diameter4.63mm suitable for aluminium material and anchor nut part nodin65344-bc06d. , nutplate drill motor with one set of accessories for anchor nut part no 6jsmrb10215. , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no9. , drill cum countersink cutter solid carbidedrill diameter2.4 mm countersink rivet head diameter4.63mm suitable for cfc material and anchor nut part no6jsmrb10215. , driil cum countersink cutter hss m42(8percentageco) drill diameter2.4 mm countersink rivet head diameter4.63mm suitable for aluminium material and anchor nut part no6jsmrb10215. , nut plate drill motor with one set of accessories for anchor nut part no 5jsmrb10215 , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 13. , drill cum countersink cutter solid carbide drill diameter 2.4 mmcountersink rivet head diameter 4.63 mm suitable for cfc material and anchor nut part no5jsmrb10215 , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.4 mm countersink rivet head diameter4.63 mm suitable for aluminium material and anchor nut part no5jsmrb10215 , nut plate drill motor with one set of accessories for anchor nut part no155n941-5 , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 17. , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.6 mm countersink rivet head diameter5.2 mm suitable for aluminium and titanium material and anchor nut part no155n941-5 , nut plate drill motor with one set of accessories for anchor nut part noca21021 , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.5 mm countersink rivet head diameter4.63 mm suitable for aluminium material and anchor nut part noca21021 , nut plate drill motor with one set of accessories for anchor nut part no3381a-05 , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.6 mm countersink rivet head diameter5.2 mm suitable for aluminium material and anchor nut part no3381a-05

CTN :42681393

05 Dec, 2025 5.00 Lacs

Hisar - Haryana

Tender For corrigendum : supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coati

Central Government/Public Sector

CTN :42753758

05 Dec, 2025 3.14 Crore

Bangalore - Karnataka

Tender For tender for supply of nut plate drill motor with accessories and cutters : :-- nut plate drill motor with one set of accessories for anchor nut part no din65344-bc05d. , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 1. , drill cum countersink cutter solid carbide drill diameter 2.4 mmcountersink rivet head diameter 4.63 mm suitable for cfc material and anchor nut part nodin65344-bc05d. , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.4 mm countersink rivet head diameter4.63 mm suitable for aluminium material and anchor nut part no din65344-bc05d. , nutplate drill motor with one set of accessories for anchor nut part no din65344-bc06d. , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 5. , drill cum countersink cutter solid carbide drill diameter2.4 mm countersink rivet head diameter4.63mm suitable for cfc material and anchor nut part nodin65344-bc06d. , driil cum countersink cutter hss m42(8percentageco) drill diameter2.4 mm countersink rivet head diameter4.63mm suitable for aluminium material and anchor nut part nodin65344-bc06d. , nutplate drill motor with one set of accessories for anchor nut part no 6jsmrb10215. , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no9. , drill cum countersink cutter solid carbidedrill diameter2.4 mm countersink rivet head diameter4.63mm suitable for cfc material and anchor nut part no6jsmrb10215. , driil cum countersink cutter hss m42(8percentageco) drill diameter2.4 mm countersink rivet head diameter4.63mm suitable for aluminium material and anchor nut part no6jsmrb10215. , nut plate drill motor with one set of accessories for anchor nut part no 5jsmrb10215 , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 13. , drill cum countersink cutter solid carbide drill diameter 2.4 mmcountersink rivet head diameter 4.63 mm suitable for cfc material and anchor nut part no5jsmrb10215 , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.4 mm countersink rivet head diameter4.63 mm suitable for aluminium material and anchor nut part no5jsmrb10215 , nut plate drill motor with one set of accessories for anchor nut part no155n941-5 , additional accessories for nut plate drill motor (mandrel collets and bushing) at item sl no 17. , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.6 mm countersink rivet head diameter5.2 mm suitable for aluminium and titanium material and anchor nut part no155n941-5 , nut plate drill motor with one set of accessories for anchor nut part noca21021 , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.5 mm countersink rivet head diameter4.63 mm suitable for aluminium material and anchor nut part noca21021 , nut plate drill motor with one set of accessories for anchor nut part no3381a-05 , driil cum countersink cutter hss m42 (8percentageco) drill diameter 2.6 mm countersink rivet head diameter5.2 mm suitable for aluminium material and anchor nut part no3381a-05

Insert Drill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector