Latest insert Tenders | Government insert Tenders

Central Government/Public Sector

CTN :45047930

22 May, 2026 NA

Moradabad - Uttar Pradesh

Tender For electrical work for construction of new running room at ynrk,provision of divyangjan facilities at various stations under aden/hw,provision of divyangjan facilities (like ramps,hand rails,parking spaces etc.)at doiwala and dehradun stations various stations under sse/w/ddn under aden/hw & provision of divyangjan facilities (like ramps,hand rails,parking spaces etc.)at various stations under under aden/rk.

Central Government/Public Sector

CTN :44912584

10 Aug, 2026 NA

Yamunanagar - Haryana

Tender For corrigendum : supply of carbir insert snmg - 190616 coated grade tn-2000. widia, sandvik, seco, ceratizit or equivalent [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45047926

22 May, 2026 NA

Agra - Uttar Pradesh

Tender For balance work of supply & stacking of 60kg/ 60ei-r260 grade rails at welding portions using compressed air pertol perheating system, with prefabricated three piece moulds (zircon washed) manual pressed using single shot crucible fitted with automatic tapping thimble (att) technology at sse(p.way)/agra depot in agra division

Central Government/Public Sector

CTN :45025675

27 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : manufacturing and supply of cms crossing 1 in 16 bg for 60 kg. rails on psc sleepers layout to rdso drg. no. t-5693 (alt-4) (latest alteration) complete with all fittings as listed in the drawing excluding fish plates, fish bolts, g. r. pads, metal liner, gfn liner, elastic rail clips and check rails. specification: irs/t-29(revised-2024) (latest alteration) for cast manganese steel crossing complete with relevant specifications for all parts. [n.b: term -latest- wherever used will mean the alterations/amendments up to 10 days prior to tender closing date. [ warranty period: 30 months after the date of delivery ]

Private Sector

CTN :45034385

09 May, 2026 NA

Jhajjar - Haryana

Tender For tender for supply of seal set for blocking unit bl10-2 by 200 , set of o ring for blocking unit bl 10 , seal set for hpbp servo valve st10 , seal set for st10-65 , ceramic filter insert , servounit st 10-65 by r6z for hpbypass , blocking unit bl 10-2 hp by pass

Central Government/Public Sector

CTN :45033506

09 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of insert lncx1806 suitable for milling cutter, sandvik make r260.7-200(ref. tech. comm. sheet for details)

Central Government/Public Sector

CTN :44949000

04 May, 2026 2.72 Lacs

Korba - Chhattisgarh

Tender For corrigendum : supply of cutting tools c c > f> f - blade, saw saw type hacksaw, blade width 67 mm, blade length 8 m, blade thickness 1.6 mm, teeth per inch 2 by 3 tpi, fft bimetal , blade saw hcksw,67mm,8m,1.6mm,1.4 by 2tpi , cutter, end mill material high speed steel, diameter 6 mm, shank shape taper , cutter, end mill material high speed steel, diameter 10 mm, shank shape taper , cutter, end mill material high speed steel, diameter 14 mm, shank shape taper , cutter, end mill material high speed steel, diameter 18 mm, shank shape taper , cutter, end mill material high speed steel, diameter 25 mm, shank shape taper , bit, twist material high speed steel, diameter 32 mm, shank shape taper , bit, twist material high speed steel, diameter 3 mm, shank shape taper , bit, twist material high speed steel, type shrink, diameter 5 mm, shank shape taper , bit, twist material high speed steel, diameter 5.5 mm , bit, twist material high speed steel, diameter 6 mm, shank shape taper , bit, twist material high speed steel, type shrink, diameter 7 mm, shank shape taper , bit, twist material high speed steel, shank size 350 mm, type extra long, diameter 10 mm, shank shape taper , bit, twist material high speed steel, diameter 14 mm, length 400 mm, shank shape taper , bit, twist material high speed steel, diameter 20 mm, shank shape taper , bit, tool type square, dimensions m42 x 16 x 150 mm, material high speed steel , bit, twist material high speed steel, type shrink, extra long, diameter 65 mm, shank shape taper , tap, thread cutting material high speed steel, type hand, thread diameter 1-1 by 2 in, thread series unc , tap, thread cutting material high speed steel, thread diameter 1 in, thread series bsw, thread direction ground, starting chamfer type hand, standard bs 949 part 1 1992 , insrt indexbl,cnmg 120408,tn4000 , insert, threading type turning, model no dnmg150604, tn4000 , insert, threading type turning, model no dnmg150608, tn4000 , insrt grvng,wmts200m2p02ptwu25pt , shim 21485622 , shim pin,21485608 , bar, boring tool model no s32s pclnr12 f3, fft w p clamp , punch cntr,4in , disc grindg 31.75mm,150mm,whl,6mm , disc grindg 31.75mm,100mm,aa46 54k5v8 , disc grindg 22.23mm,180mm,whl,7mm , bit tool dmnd drssr,2.5crt,w by 6in stl rod //bid details 2 / 31

Central Government / Public Sector

CTN :45050622

13 May, 2026 NA

Multi City - Multi State

Tender For supply of 16 pin heavy duty connector (male insert, female insert) as per bill of material of rdso spec. no. rdso/pe/spec/ac/0187-2016(rev.-0) or latest [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44907635

09 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : procurement of spares for flowserve make mechanical seals of various hydrocarbon pumps installed in gsu (12,13) and csu plants at ongc uran plant, through oem m/s flowserve sanmar pvt. ltd, - repairing kit consisting of pt no-32, sleeve kit, compression unit, insert, throttle bush, set screws, throttle bush, sleeve

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Insert Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors