Latest inserter unit Tenders | Government inserter unit Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

State Government

CTN :42129935

06 Oct, 2025 1.17 Lacs

Tijara - Rajasthan

Tender For aadarsh aanganbadi material ( ro , water tank electric motar , electric items fan & led bulb)

State Government

CTN :42129937

06 Oct, 2025 1.17 Lacs

Tijara - Rajasthan

Tender For aadarsh aanganbadi material ( water tank , ro water , electric moter & items fan & led lights )

CTN :42078991

27 Oct, 2025 99.89 Lacs

Bhopal - Madhya Pradesh

Tender For supply of electric material and alluminium wire for maintenance work

CTN :42059222

10 Oct, 2025 8.43 Lacs

Bhopal - Madhya Pradesh

Tender For supply of electric material for maintenance work

CTN :42111619

29 Oct, 2025 30.00 Lacs

Pithamapur - Madhya Pradesh

Tender For supply of electric material for financial year 2025-26

CTN :42139834

23 Oct, 2025 2.19 Crore

Raichur - Karnataka

Tender For construction of proposed 50 tpd mrf centre material recovery facility of machinery phase 1 at raichur city - fork lift 3 stage full free mast 4500mm mast lowered height 2100 mm without back rest 1500 mm long forks 1070 mm front & rear solid tyres rear view mirror,right and left sides standard seat with safety belt load backrest overhead guard turn signal lights rear lights buck-up buzzer standard tool kit electronic rotating flashlight (yellow), skid steer loader skid steer loader bull bull skid steer loader - av490 equipped with std bucket, powered by kubota - 49.5 hp 4 cylinder liquid cooled diesel engine, hydrostatic drive with hydraulic pilot operated variable displacement tandem pump with heavy duty.the rate includes the cost of transportation, supply, 1 year insurance, rto charges, gst & any taxes if applicable., semi electric stacker semi electric stacker (1000kg) semi electric stacker capacity 1000kg, mast type telescopic, fork length 1150mm, fork outer width 560mm, load center 600mm, lowered height of fork 90mm, lift height of forks 200mm, shut height of equipment 1600mm, overall length of the equipment 1850mm, overall width 850mm.the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable., weighing scale essae ds 415n 1000kg capacity 1000 x 1000mm platform, frame moc ms, platter moc msc, connectivity rs 232. the rate includes the cost of transportation, supply, installation and gst including any other taxes if applicable, pallet truck - 2500 kg pallet truck (2500kg capacity) detailed specification. the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable , bag opener base frame length 2000mm rotor diameter 600mm width 1000mm pulley dia 500mm rotor blade angle 45 deg.outer shaft 100mm blade nos 50 q blade thickness 25 mm (high carbon steel) outer hopper cover 3mm ms material out let screen 1000x 605mm hole, stand 100 x100 mm ms pipe, gear motor 15 hp (crompton)the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable., ballistic separator ballistic separator detailed specification in annexure-3(detailed specifications have to be entered) (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), transfer conveyor- underground & inclined m type conveyor 65 ft transfer conveyor 65 feet with adjustable speed motor.detailed specifications if applicable have to be entered.(the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), magnetic separator model of machine dcc-c1000 width of belt 1000 mm fabric of belt nylon - nylon 400/4 ply grade m-24(top rubber 4mm bottom 2mm) belt thickness 10 mm thick impact idler spacing 250 mm type of conveyor v type ( idler arrangment) motor and gear box branded /imported motor hp. (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), horizontal baler machine horizontal baler. (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), vertical single box baler - 50 mt capacity vertical single box baler 50 tonner. (the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable) , pvc inclined belt conveyor 25ft - 7620 mm pvc inclined belt conveyor 25 feet detailed specification.(the rate includes the cost of transportation, supply, installation, commissioning and gst including any other taxes if applicable), pvc flat belt conveyor 45ft (mezanine floor) for secondary sorting pvc insulated belt conveyor 45 feet (mezzanine floor) pvc flat belt conveyor (mezzanine floor) dimension 15250 x 800 x 800 4500 lbh ss

CTN :42124845

27 Oct, 2025 NA

Kadi - Gujarat

Tender For rate contract for stationery items , xerox work , lamination , printing work , computer items , epbx repairing , cctv maintenance , cleaning equipment , pesticide medicines , building material , pvc and hardware material , fabrication work , electric items , tent decoration , catering service , videography and photography , hoardings and banners , sound system maintenance , water cooler repairing , ac repairing , generator repairing , vehicle tube and tyres , vehicle battery , pump repairing , fighter repairing , lamination and binding of documents , etc

CTN :42134122

10 Oct, 2025 NA

Savarkundla - Gujarat

Tender For tender for led light with pole , paver block work , pvc pipe , building material , labour works , door to door garbage collection , dustbin , door and windows , iron grill , electric work , water supply work job work , water fitting material , 300 mm d pipe , drain work , well drilling work , electric water motor , jcb hiring , furniture , office furniture , electric items, china mosaic , cctv camera , sound system , projector system , wifi , inverter system , ro water plant , rcc benches , galvanised sheets , water valve , white cement , marble name plates , water tanker , etc

Central Government/Public Sector

CTN :41810845

06 Oct, 2025 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply of non-medical items for supplies to srinagar - list of products, apron (doctor coat) size m, apron (doctor coat) size l, apron (doctor coat) size xl, apron (doctor coat) size xxl, air (pressure medical) mattress, broom 18inch, plastic bucket without lid 25lts, glass & multi surface cleaner liquid spray 500ml bottle, office chair nonrotatable leather material, cells (aa), cells (aaa), crib (baby warmer) mattress, digital led clock with temperature display, digital thermometer, detergent powder per kg, duster cloth (24*48 inch)2feet * 4feet, exhaust fan 5.7d *13w * 12.6h centimetres, fly/mosquito catcher medium electric trap 27*7*38 cm, mosquito & fly killer spray, bathroom cleaner 1l pack, toilet cleaner 1l pack, liquid hand wash soap, white phenyl 5 lts, lock 60mm, 8 brass lever, spo2 probes and leads for monitor (massimo), plastic mugs 2lts for water, soap 75g, steel wool (scotch brite stainless steel scrubber), skin temperatureprobes, toilet brush hockey type, vein finder paediatric torch type led, wiper 4feet length, wall fan, a4 paper rim 100 page, calculator, antivirus, cartridge 77a, cartridge 88a, cartridge 110a, cartridge 12a, cartridge 137a, correction pen, carbon paper100 page, file covers with spring file folder for documents, glue stick, highlighter pen, marker, note pad 50 pages, paper pin, plain register 100 page, push pin (hole puncher), pen drive 16gb, pens blue, pens red, pens black, pens green, file covers (cobra 2 pin type), stapler pins for medium size stapler, stapler medium size, disposable moline sheets 60cm*90cm, office table 3feet *5feet, room freshener, slippers, rubber macintosh, mattress cover plastic, crib mattress, wire 1.5 mm, wire 2.5 mm, wire 4 mm, wire 6 mm, s.s combine box type, top 6 amp, top 16 amp, socket 6 amp, flish type socket 15 amp, steel grip tape, l.e.d 4 feet tebo lights, modler type fan dimmer, floor cleaner, soda ash, vaseline, doormats, dustbin (small size), gyser (50 l), wall hangers, water purifier, stop watch timer (lab), wooden slide box (lab), test tube racks (lab), incubator filters, nichrome loop straight, nichrome loop circular, ibm spss statistics software, ups 10 kva, minimum 30 minutes

Inserter Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector