Latest inspection cover Tenders | Government inspection cover Tenders

Central Government/Public Sector

CTN :45709067

18 Jul, 2026 45.00 Lacs

Roorkee - Uttarakhand

Tender For repair replacement of internal wiring incl sub main wiring, mcb dbs, bldgs security lights and connected items in pocket 1 to 8 under ge roorkee - taking down old unserviceable point wiring of any description including all fittings and fixtures like switches, sockets, ceiling rose, fan regulator, tubelight,, mirror light,, ceiling light etc complete all as specified and directed., m&l for point wiring with 1.5 sqmm frls-h insulated, unsheathed, multistranded, 1100 volts grade copper conductor cable single core conforming to is:694 along with one run of 1.5 sqmm frls-h insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm(od), concealed in wall/ floor etc including provision of earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass gi screws/ modular cover plate as required for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for one light / ceiling fan / exhaust fan / call bell point controlled by one switch, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., all as per item no 2 here-in-before but one wiring in existing conduit for one light / ceiling fan / exhaust fan / call bell point controlled by one switch., all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one one light point controlled by two no. two way switch complete all as specified and directed, all as per item no. 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., m&l for sub main wiring along with earth wire with frls-h insulated copper conductor, single core cable drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for 2runs x 4 sqmm(ph & n) + 1run x 4 sqmm(earth wire):- (note: three runs of copper cable and one run of pvc conduit shall be measured as one unit length), all as per item no 11 here-in-before but 2runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), all as per item no 11 here-in-before but 2runs x 10 sqmm(ph & n) + 1run x 10 sqmm(earth wire), all as per item no 11 here-in-before but 4runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), notes for item no. 2.00 to 14.00(i) quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) if any beam / column / rock wall is encountered while cutting chases, that particular portion may be provided with pvc casing & capping or surface conduit for drawing cables and surface pvc gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) no cutting shall be done on ceiling for laying pvc conduit for ceiling fan point wiring. surface conduit or pvc casing capping may be

Central Government/Public Sector

CTN :45708577

20 Jul, 2026 NA

Saran - Bihar

Tender For supply of inspection cover for tr motor type 4303dy of demu/dpc as per drg. mo. -jmp/sk-4/12. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government/Public Sector

CTN :45666420

14 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of 1 tip , 2 bracket , 3 fitting of frame 9k , 4 fitting of frame 9k , 5 fitting of frame 10k , 6 fitting , 7 fitting , 8 fitting of frame26k , 9 fitting of frame26k , 10 doubler , 11 upper panel between frame 35-38 , 12 fork , 13 rod , 14 terminal , 15 terminal , 16 terminal , 17 bush , 18 jaw , 19 rod , 20 sperical bearing , 21 terminal , 22 hatch cover , 23 hatch cover , 24 bracket , 25 bracket , 26 skin , 27 skin , 28 eccentric bush , 29 top bush , 30 leading edge n15a , 31 leading edge n15a , 32 longeron n2 upper unit , 33 bolt , 34 washer , 35 bell crank , 36 bell crank , 37 plug , 38 bolt , 39 washer , 40 washer , 41 washer , 42 washer , 43 bush , 44 bush , 45 shaft , 46 bush , 47 adaptor , 48 flange , 49 nut , 50 nut , 51 nut , 52 adaptor , 53 pipe connection , 54 pipe connection , 55 contact bolt , 56 flange , 57 coupling , 58 bracket , 59 jet , 60 pipe connection , 61 plate , 62 lever , 63 fitting , 64 adaptor , 65 pipe connection , 66 flange , 67 slide block , 68 flange , 69 flange , 70 bracket , 71 strut , 72 profile , 73 end piece , 74 coupling , 75 coupling , 76 coupling , 77 nut , 78 nut , 79 end piece , 80 coupling , 81 pin , 82 handle , 83 end piece , 84 end piece , 85 end piece , 86 locator , 87 rod , 88 handle , 89 nut , 90 bracket , 91 pin , 92 fitting of frame 10k , 93 fitting of frame 10k , 94 fitting , 95 fitting , 96 fitting of frame26k , 97 fitting of frame26k , 98 wall of frame 38 middle compartment , 99 adapter , 100 roller throttle assly , 101 bell crank , 102 bell crank * /bid number : gem/2026/b/7700833 + /dated: 23-06-2026 ' ' / bid document 1 / 82

Central Government/Public Sector

CTN :45643195

29 Jun, 2026 NA

Ranipet - Tamil Nadu

Tender For supply of inspection cover small with packing for hitachi tm to drg.no.10 s 813-666a and 10 s 813-668 c. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45640870

06 Jul, 2026 NA

Doiwala - Uttarakhand

Tender For spare repair and overhauling of sugar stacker - needle g.b.250 (long size) , needle bar guard, , looper, , looper thread cast of hook assembly, , needle bar with nut, , looper ball joint assembly, , needle bar connecting link, , feed bar, , feed drive eccentric assembly, , stitch regulating stud assembly, , feed bar shaft, , throat plate, , bush set, , threat tension assembly complete, , feed dog, , feed rocker assembly, , screw set, , feed lift eccentric fork, , feed lift eccentric fork assembly, , looper avoid eccentric assembly, needle bar connection, , crank connecting rod, , needle bar connecting assembly, , needle bar clamp nut, , looper shaft, , looper rocker assembly, , collar for feed rocker, , pressure bar(left), , pressure bar(right), , pressure foot, , guide fork, , looper drive lever, , shell for crank shaft, , needle lever ball link, , needle lever, , looper drive connecting assembly, , main crank shaft assembly, , ball bearing for main crank shaft, frame thread guide, , needle lever shaft, , looper drive lever shaft, , pressure bar collar, , driving pully for stitching head, , bearing housing, , bolt for driving pully, , feed rocker shaft, , pressure bar regulator, , thread eylet, , cover set(aluminium), , looper stud complete holder, , shaft for looper rocker stud, , take up complete assembly, , looper shaft fork, , needle lever bolt

Central Government/Public Sector

CTN :45638391

11 Jul, 2026 NA

Kalyan - Maharashtra

Tender For supply of set of gasket for axle box inspection cover of wag9/ wap7 locos as per drg. no. els/vskp/ 2017/18 each set consisting of [i] item no.1 - 04 nos [ii] item no. 2 - 8 nos. ]

Central Government/Public Sector

CTN :45601845

10 Jul, 2026 NA

Guna - Madhya Pradesh

Tender For 1 set contains: { i) 12 nos - oil seal part no: 26 ii) 12 nos - o-ring part no: 25 iii) 1 no- safety va , plunger, part no. 63, drawing no. : mgs-cst-006a of seal flushing pump 11/21- p-36a and b of carbamate , piston inspection cover, part no. 24, drawing no. : mgs-cst-006a of seal flushing pump 11/21-p-36a~ b fo , drive pulley, part no. 11, drawing no. : mgs-cst-006a of seal flushing pump 11/21-p-36a~ b for carbama

Central Government And Public Sector

CTN :45577910

08 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of 1. cylinder liner for dlw 251 engine, dlw part no- 10124603 , 2. piston pin for dlw 251 engine, dlw part no- 10230580 , 3. piston pin sleeve for dlw 251 engine, dlw part no-10230385 , 4. snap ring, piston pin retaining for dlw 251 engine, dlw part no-15345129 , 5. bolt spl. connecting rod to cap for dlw 251 engine, dlw part no- 10140724 , 6. valve lever lock guide for dlw 251 engine, dlw part no-10210714 , 7. assy. nylon gear, gov. drive for dlw 251 engine, dlw part no-10051624 , 8. gear governor drive, camshaft drive for dlw 251 engine, dlw part no- 10241620 , 9. gear pinion for dlw 251 engine, dlw part no-10243719 , 10. key, pinion to drive gear, 5-16 inch x 5- 16x1 inch long for dlw 251 engine, dlw part no-15312185 , 11. lever eccentric adjustment for dlw 251 engine, dlw part no-10140300 , 12. eccentric with pin for dlw 251 engine, dlw part no-10051193 , 13. fuel pump cross head lifter for dlw 251 engine, dlw part no-10142745 , 14. fuel cam roller pin for dlw 251 engine, dlw part no-10216881 , 15. fulcrum pin for f.p. lifter for dlw 251 engine, dlw part no-10216959 , 16. air and exhaust push rod lifter for dlw 251 engine, dlw part no-10142757 , 17. cam roller pin, air and exhaust for dlw 251 engine, dlw part no-10216870 , 18. fulcrum pin for push rod lifter for dlw 251 engine, dlw part no-10216947 , 19. fuel pump support with cross head and lifter for dlw 251 engine, dlw part no-10050723 , 20. push rod lifter seat for dlw 251 engine, dlw part no- 10211147 , 21. spring seat for dlw 251 engine, dlw part no-10210520 , 22. spring seat lock for dlw 251 engine, dlw part no-10210477 , 23. air and exhaust valve guide for dlw 251 engine, dlw part no-10210639 , 24. valve lever assy for dlw 251 engine, dlw part no-10040079 , 25. yoke, air and exhaust valve for dlw 251 engine, dlw part no-10140323 , 26. cam roller bushing for dlw 251 engine, dlw part no-10216893 , 27. fixed bushing cross head lifter fulcrum pin for dlw 251 engine, dlw part no-10150845 , 28. bushing at fulcrum pin push rod lifter for dlw 251 engine, dlw part no-10150109 , 29. cam roller, push rod lifter for dlw 251 engine, dlw part no-10216844 , 30. retainer ring for cam roller pin for dlw 251 engine, dlw part no-15345087

Central Government/Public Sector

CTN :45576050

06 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of inspection cover small with packing for hitachi tm to drg.no 10s-813-666a and 10s-813-668c [ warranty period: 30 months after the date of delivery ] ]

Inspection Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors