Latest inspection equipment Tenders | Government inspection equipment Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

CTN :45703815

11 Jul, 2026 6.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of general electric items b b - wire 22swg , glass sleev 14 mm , slip ring for cane unloader bbl make 10 kw motor , exhaust fan 24 , plastic cooling fan for 5 00 hp motor , plastic cooling fan for 7 5 hp motor , plastic cooling fan for 10 hp motor , havells make auto cut hot air blower 2000 watt with overheat protection , soldering iron 65 watt , soldring wire , plastic cooling fan for 50 hp motor , teflon rod dia 65mm length 300mm , glass sleev 16 mm , mash rum type push button red , mash rum type push button blue , plastic cooling fan for 15 hp motor , carbon brush 12 20 32 , mettalic carbon brush 20 15 8 , carbon brush 30 20 100 , timer st 800 , carbon brush 21 31 37 , porcelean kit kat200 amp 415 v standard make , fuse wire 6 amp , fuse wire 10 amp , fuse wire 16 amp , dol starter empty box mk1 , dol starter empty box ml2 , exhaust fan 16 1 phase 960rpm ci body crompton havells make , carbon brush 20 32 40 , rocker arm 12 5 hp kec slip ring motor , h t connector 3 way , h t connector 6 way , potentio meter 500 ohm 2 w 10 turn bourns make , diode 6 amp , step down double phase transformer 415 vac to 24vdc , usha bajaj make room heater with ss reflector and body , dc solenoid coil for hydraulic grab for reverse forward direction , ss seamless ring size 1 for cane unloader , karam make industrial safety belt , silk rope 3 4 resham , foldable aluminium ladder 16 ft , amp meter 400 5 96 96 , amp meter 0 100 5 96 96 , amp meter 150 5 96 96 , limit switch 1 no 1 nc type ls 011 10 amp 500 v , frequency meter 96 96 , frequency meter digital type , air cooled resistance box for 12 5 hp 15 hp bbl make slipring motor , analog rpm meter make beacon sensor type input magnetic picup no of teeth 06 range 0 8000 rpm , selector switch for volt meter , selector switch for amp meter , volt meter 96 96 0 500 vac ae make , current transformer ct 250 5a , amp meter 300 5 96 96 , amp meter 600 5 96 96 , dyno pack with controller , current transformer ct 300 5a , current transformer ct 400 5a , current transformer ct 600 5a , current transformer ct 500 5a , current transformer ct 100 5a , carbon holder for 12 5 hp slip ring motor cane unloader motor , current transformer ct 500 1 a , amp meter 500 5 96 96 , amp meter 800 5 96 96 , porcelean kit kat 100 amp 415v , amp meter 250 5 96 96 , amp meter 1200 5 96 96 , timer 800 q 1 no 1 nc , portable single phase welding machine 220 vac , current transformer 1200 1 , current transformer 1200 5 , ictpn switch 200 amp , metravi make nctm 200 contact on contact combined digital tacho metermeter , diamond hammer drill bit size 6 mm for aluminium busbar drilling , diamond hammer drill bit size 8 mm for aluminium busbar drilling , diamond hammer drill bit size 10 mm for aluminium busbar drilling , diamond hammer drill bit size-14 mm for aluminium busbar drilling

CTN :45706122

01 Jul, 2026 NA

Kolkata - West Bengal

Tender For procurement of miscellaneous(tools and equipment and spare parts) - safety shoe (7no-3,8no-2) , 20 w led torch ( searchlite torch light) , umbrella (big ) , safety hand gloves (11kv) , rain coat (xl-2no,xxl-1no) , gumboot (7-3no,8-2no) , socket wrench set , cable punching, lug crimper 25-300 mm square , auto ranging 600a ac or dc 3 digit 6000 counts , digital clamp meter,ac current(a) : 600.0a,ac , voltage 600v,resistance(m ) 40m , capacitance( f) , 100 f, frequency(mhz) 1mhz,auto power off with , disable and low battery indication large backlit lcd , display , hamer (800 gm) , chisels (10'') , hand grinding machine , hand drill 500w , spanner set (dal)6-24 , ring spanner set ,6-24 , allen key , screw driver set 8'',10'',1' , wire cutter (nippor) , drill bit (6mm-2,8mm-1,20mm 1' -1) , wooden ladder 7' , knife for cable work , spaner slide rance (9''-1,12''-1) , tools bag (heavy duty) , oil can pump , fan bearing puller and 3 leg 4inch bearing puller set , lever tool , heavy duty foldable aluminium ladder (with anti-skid , shoes) 7-feet aluminium ladder (with platform) , 6 sqmm cu socket (ring) , 10 sqmm cu socket(ring) , 16 sqmm cu socket (ring) , 25 sqmm al flat socket , 35 sqmm al flat socket , 70 sqmm al flat socket , 95 sqmm al flat socket , 120 sqmm al flat socket , 185 sqmm al flat socket , 300 sqmm al flat socket , 400 sqmm al flat socket , 70sqmm al pin socket , 120 sqmm al pin socket

Central Government/Public Sector

CTN :45702798

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98414501: cond. & u/s. electrical scrap consiting of inverter ,transformer for pre cooling, battery charger sorts and size, stabilizer, current regulators,ac/dc welding rectifier/plant,chokes, meters, capacitors, led lights/tube, vacuum cleaner, knob, torch lights of sorts and sizes, coach guidence parts, switches of various types, electrical parts, ballast, street lights, nugger, chokes, chargers, regulator, pre cooling switch,roof mounted electric loco ac cab,frequency controller, starter, fuse, terminals,timer relay, kwh meters, circuit board, amplifier, panel board, led light,socket,tube light holder, multi colour lamp, digital tempreature meter, chargeable lamp, soldering iron, tester, volt meter, various type of meters, insulation tester, megger,solar board and water heater,solar sets, analog starter,tlb instrument,different type of dlb instrument,boost charger, sms alert,holder, electric detector, ethernet card, relay panel, ups, smps atx, lan extender,port switch, media converters, optical fiber cable equipment, ethernet switch,ara terminal/fuse, recttifier,dc dc converter, earth electrod,vhm charger,head lamp, relay timer ,led lamp,led shunt routesolar panel,spd,spt, trasmitter,receiver,alarm system,smr ei, cab ac,pressure gauge, multimeter, heating elements, speaker, amplifier, lamp shades, speedometer,vcd,different type of relay,base assembly,pcb card,program switch,bl box,different type of ammeter,pedal switch,ups various,fl choke,single phase meter,mcb various amps,electronic timer switch,single phasing preventer, ballast off size,capacitors of various sizes,fan regulater, and such other similar electrical scrap as is where is condition. note: 1).if any non ferrous items found in loose conditon should be returned to the custodian,(2) pick and choose not permitted. (3) crane/jcb loading permitted.location: tree no.04 ,middle of scrap yard /ssd/ptj.

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government/Public Sector

CTN :45388038

03 Jul, 2026 NA

Koraput - Odisha

Tender For corrigendum : supply of bench type wet fluorescent magnetic particle inspection equipment

Central Government/Public Sector

CTN :45650229

13 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of borescope - inspection equipment (q3)

Central Government/Public Sector

CTN :45638420

29 Jun, 2026 NA

Mumbai - Maharashtra

Tender For set of digital display meters for switch board cabinet of power car consisting (i) 3-line digital display ac frequency meter model:-input:- 0-800v, 45-65hz aux supply:- 12-48 vdc, accuracy class:- 1.0, size :- 96*96 sq. mm.= 01 no. (ii) 3-line digital display ac volt meter, model:- input:-0- 800v aux supply:- 12-48 vdc, accuracy class:- 1.0 size :- 96*96 sq. mm.= 01 no. (iii) 3- line digital display ac ammeter model:-input:-1/5 a aux supply:- 12-48 vdc, accuracy class:- 1.0, size :- 96*96 sq. mm.= 01 no. make:- rishabh, lauritz knudsen, yokins, schneider, abb only [ warranty period: 30 months after the date of delivery ] ]

CTN :45363423

29 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For corrigendum : supply of metrology lab items - "ultrasonic flaw detector specification ● test range: 2.5 mm to 10 meter in steel● velocity range: 1000–15000 m/s● gain: minimum 100 db with calibrated steps● frequency range: 0.5–15 mhz● display: a-scan display (lcd)● modes: pulse echo and transmit/receive● linearity:● vertical: ±3%● horizontal: ±0.5%● probes: minimum 2 (straight and angle)● connectors: standard (size 00 or equivalent)● power: rechargeable battery+ ac supply ", "optical digital microscope specification magnification: 40x to 400x● digital camera: minimum 5 mp resolution● display: pc/monitor via usb/hdmi or built-in display● illumination: adjustable led illumination● focus: coarse and fine focusing mechanism● optics: coated lenses with wide field view● stage: mechanical stage with slide holder● software: image capture, measurement, and analysis software included● connectivity: usb / hdmi/ethernet", "portable surface roughness testerspecification:● parameters: ra, rz, rq, rt● measuring range:ra: 0.005–16 µmrz: 0.02–200 µm● resolution: ≤ 0.01 µm● accuracy: ±5% or better● stylus: diamond tip (≈5 µm radius)● cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm● display: digital lcd● output: usb interface for pc connection no 50000 ● standards: iso 4287 / din /ansi compliant● power: rechargeable battery", "digital height gage with driving wheel (300)specification:● measuring range: 0–300 mm● resolution: 0.01 mm● accuracy: ±0.03 mm● construction: hardenedstainless steel column● base: ground and lappedbase suitable for surface plate● measuring tip: carbidetipped scriber● movement: smooth sliderwith fine adjustment wheel● display: digital lcd● power: battery operated"

Inspection Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector