Latest inspection cover Tenders | Government inspection cover Tenders

Central Government/Public Sector

CTN :45709067

18 Jul, 2026 45.00 Lacs

Roorkee - Uttarakhand

Tender For repair replacement of internal wiring incl sub main wiring, mcb dbs, bldgs security lights and connected items in pocket 1 to 8 under ge roorkee - taking down old unserviceable point wiring of any description including all fittings and fixtures like switches, sockets, ceiling rose, fan regulator, tubelight,, mirror light,, ceiling light etc complete all as specified and directed., m&l for point wiring with 1.5 sqmm frls-h insulated, unsheathed, multistranded, 1100 volts grade copper conductor cable single core conforming to is:694 along with one run of 1.5 sqmm frls-h insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm(od), concealed in wall/ floor etc including provision of earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass gi screws/ modular cover plate as required for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for one light / ceiling fan / exhaust fan / call bell point controlled by one switch, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., all as per item no 2 here-in-before but one wiring in existing conduit for one light / ceiling fan / exhaust fan / call bell point controlled by one switch., all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one one light point controlled by two no. two way switch complete all as specified and directed, all as per item no. 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., m&l for sub main wiring along with earth wire with frls-h insulated copper conductor, single core cable drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for 2runs x 4 sqmm(ph & n) + 1run x 4 sqmm(earth wire):- (note: three runs of copper cable and one run of pvc conduit shall be measured as one unit length), all as per item no 11 here-in-before but 2runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), all as per item no 11 here-in-before but 2runs x 10 sqmm(ph & n) + 1run x 10 sqmm(earth wire), all as per item no 11 here-in-before but 4runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), notes for item no. 2.00 to 14.00(i) quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) if any beam / column / rock wall is encountered while cutting chases, that particular portion may be provided with pvc casing & capping or surface conduit for drawing cables and surface pvc gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) no cutting shall be done on ceiling for laying pvc conduit for ceiling fan point wiring. surface conduit or pvc casing capping may be

Central Government/Public Sector

CTN :45708577

20 Jul, 2026 NA

Saran - Bihar

Tender For supply of inspection cover for tr motor type 4303dy of demu/dpc as per drg. mo. -jmp/sk-4/12. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government/Public Sector

CTN :45643195

29 Jun, 2026 NA

Ranipet - Tamil Nadu

Tender For supply of inspection cover small with packing for hitachi tm to drg.no.10 s 813-666a and 10 s 813-668 c. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45638391

11 Jul, 2026 NA

Kalyan - Maharashtra

Tender For supply of set of gasket for axle box inspection cover of wag9/ wap7 locos as per drg. no. els/vskp/ 2017/18 each set consisting of [i] item no.1 - 04 nos [ii] item no. 2 - 8 nos. ]

Central Government/Public Sector

CTN :45601845

10 Jul, 2026 NA

Guna - Madhya Pradesh

Tender For 1 set contains: { i) 12 nos - oil seal part no: 26 ii) 12 nos - o-ring part no: 25 iii) 1 no- safety va , plunger, part no. 63, drawing no. : mgs-cst-006a of seal flushing pump 11/21- p-36a and b of carbamate , piston inspection cover, part no. 24, drawing no. : mgs-cst-006a of seal flushing pump 11/21-p-36a~ b fo , drive pulley, part no. 11, drawing no. : mgs-cst-006a of seal flushing pump 11/21-p-36a~ b for carbama

Central Government/Public Sector

CTN :45576050

06 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of inspection cover small with packing for hitachi tm to drg.no 10s-813-666a and 10s-813-668c [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45359070

21 Jun, 2026 3.42 Lacs

Bellary - Karnataka

Tender For corrigendum : procurement of aph main drive gear box spares- 5230113124 , carrier seal-80vbq213s , carrier seal-80vbq213spartno:20781400 for (33.5-vi-63(75csg")smrt, lap no-4490 ) make 1, : lufkin, model : 80vbq213s,gearboxserialnos:122440&122441, input speed: 1500 rpm, speedratio 100 : service rating : 40.2 hp, servicefactor:1.19, cataloguerating: 48 hp, no. of stages: 4 stages, teeth design:1ststagespiralbevel2nd,3rd & 4th stages are singal helical application: air pre heaterfor 700mw btps , 5230113132 , make gasket retainer-5.75 odpartno:20374900 for (33.5-vi-63(75csg")smrt, lap no-4490 80vbq213s, gearboxserialnos: 122440&122441, input speed: 1500 rpm, speedratio 100 ) : lufkin, model 1, service rating 40.2 hp,, 5230113141 , seal. lip typepart no:e9020227 for (33.5-vi63(75csg jsmrt, lap no-4490 make lufkin, model: 80vbq2135, gearbox serials: 122440 & 122441, input speed 1500 rpm, speed ratio 100: 1, service rating: 40.2 hp, service factor: 1.19 catalogue rating: 48 hp, no. of stages: 4 stages, teeth design 1st stage spiral. bevel. 2nd,3rd & 4th stages are singal helical, application air pre heater for 700mw btps , 5230113213 , gasket armstrong cn705 1/32part no ap087531 for (33.5-vi-63(75csgjsmrt lap no-4490) make: lufkin, model: 80vbq2135, gearbox serials: 122440 & 122441, input speed 1500 rpm, speedratio 100: 1, service rating: 40.2 hp, servicefactor:1.19,cataloguerating: 48 hp, no. of stages: 4 stages, teeth design: stagespiralbevel2nd,3ml& 4th stages are singal helical, application air pre heater for 700mw btps , 5230113256 , gasket bearing retainerpart no:18396700 for (33.5-v163(75csg jsmrt, lap no-4490) make: lufkin, model: 80vbq213s gearboxserialnos:122440& 122441, input speed: 1500 rpm, speed ratio 100: 1, service rating 40.2 hp, servicefactor:1.19.hp.no.ofstages 4stages, teethdesign: stagespiral. bevel. 2nd,3nd & 4th stages are singal helical for 700mw btps , 5230113264 , shaft stub 80vbqf213spart no:20331800 for (33.5-vi63(75csg jsmrt lap no-4490) for 700mw btps , 5230113299 , seal lip type 5.875x7.500.sring retaining-int, rrt-750part no-e9020690 for (33.5-v163(75csgsmrt, lap no-4490) make: lufkin, model: 80vbq2135, gearbox serials: 122440 & 122441, inputspeed:1500rpm speedratio100:1, service rating: 40.2 hp, service factor: 1.19, catalogue rating: 48 hp, no. of stages: 4 stages, teeth design: 1x stagespiralbevel.2nd,3&4&stages are singal helical application air pre heater for 700mw btps , 5230113337 gasket-11" odpart no:20331000part no:ap099515 for (33.5-vi-63(75csgjsmrt, lap no-4490) make: lufkin, model: 80vbq213s gearboxserialnos:122440& , 122441, input speed 1500 rpm, speedratio 100: 1, service rating: 40.2 hp, servicefactor:1.19,cataloguerating 48 hp, no. of stages: 4 stages, teeth design: stagespiralbevel2nd,3ml& 4th stages are singal helical, application air pre heater for 700mw btps , 5230113353 gasket, retainer-7.500 odpart no:20375400 for (33.5-v163(75csg jsmrt, lap no-4490) make: lufkin, model: 80vbq213s gearboxserialnos:122440& 122441, input speed 1500 rpm, speedratio 100: 1, service rating: 40.2 hp, servicefactor:1.19,cataloguerating 48 hp, no. of stages: 4 stages, teeth design: stagespiralbevel2nd,3ml& 4th stages are singal helical, application air pre heater for , 700mw btps , 5230113400 , coupling pump guardian m-24part no:e7086825 for (33.5-vi-63(75csgjsmrt, lap no-4490) make: lufkin, model: 80vbq2135 gearboxserialnos 122440& 122441, input speed, 1500 rpm, speedratio 100: 1, service rating: 40.2 hp, servicefactor:1.19,cataloguerating: 48 hp, no. of stages: 4 stages, teeth design: stagespiralbevel2nd,3d& 4th stages are singal. helical, application air pre heater , for 700mw btps , 5230113671 , gasket inspection cover 9.25x14.75 part no:20830200 for (33.5-vi-63(75csgjsmrt, lap no-4490) make lufkin, model 80vbq2135,, application airpreheater for 700mw btps , 5230113608 gasket inspection coxer 5x12part no:am128799 for (33.5-vi-63(

Central Government And Public Sector

CTN :45318739

23 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of fluid level gauge fsa-0076 , fluid level gauge fsa-0254 , ball valve khb-25npt-3382 , seal for ball valve khb-25npt- 3382 , manifold block hydac part no. rm67429 , manifold block hydac part no. rm67473 , manifold block hydac part no. rm67461 , manifold block hydac part no. rm67435 , manifold block hydac part no. rm67441 , manifold block hydac part no. rm67442 , manifold block hydac part no. rm67443 , high pressure filter hydac part no. 1250495 , return line filter hydac part no. 1263017 , ball valve hydac part no. 3962308 , seal for ball valve hydac part no. 3393358 , ball valve khb-20npt-3382 , seal for ball valve khb-20npt-3382 , ball valve khm-40npt-3382 , seal for ball valve khm-40npt-3382 , heat exchanger gasket set 2kw , heat exchanger gasket set 4kw , heat exchanger gasket set 20kw , inspection cover rd475 , inspection cover rd250 , coupling assembly hydac part no. rm62874 , coupling assembly hydac part no. rm16234 , coupling assembly hydac part no. sp750084 , spider hydac part no. rm13425 , spider hydac part no. rm16335 , spider hydac part no. sp750090 , check valve hydac part no. 707521 , dir. control solenoid operated valve , pressure relief valve hydac part no. 6074635 , single station manifold block , connector plate , grub screw , ball valve khm-42lr-3385 , seal for ball valve khm-42lr-3385 , seal kit for pump hydac part no. 4014495 , seal kit for pump hydac part no. 4014489 , seal kit for pump hydac part no. 4566427 , gasket for inspection cover rd475 , gasket for inspection cover rd250 , mounting o-ring for adapter block , mounting o-ring for connector plate , mounting o- ring for pressure relief valve ) /bid number : gem/2026/b/7471539 * /dated: 25-05-2026 & & / bid document 1 / 46

CTN :45470231

16 Jun, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of packing rubbers for grab handle and wheel chair and interior panels - packing grab pole ceiling 2thk , packing grab pole ceiling 3thk , packing grab handle wheel chair , packing bracket ceiling end 2thk , packing bracket side inspection cover 4thk

Inspection Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors