Latest inspection door Tenders | Government inspection door Tenders

Central Government/Public Sector

CTN :41018143

19 Aug, 2025 NA

Kapurthala - Punjab

Tender For supply of set of honey comb partition frame for lhb scn with al fr hpl sheet as per spec mdts- 097 rev.01 in which hpl is as per mdts-26337 rev. 00 instead of mdts-086 note:-firm shall coll ect all latest/final drawings before manufacturing. there may be minor modification i n design. , as per drawing: mp24scnfr version 0 , packing instruction no.pi100: [ warranty peri od: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :41325189

19 Aug, 2025 NA

Kapurthala - Punjab

Tender For supply of set of honey comb partition frame for lhb scn with al fr hpl sheet as per spec mdts- 097 rev.01 in which hpl is as per mdts-26337 rev. 00 instead of mdts-086 note:-firm shall coll ect all latest/final drawings before manufacturing. there may be minor modification i n design. , as per drawing: mp24scnfr version 0 , packing instruction no.pi100: [ warranty peri od: 84 months after the date of delivery ]

State Government

CTN :41288272

16 Aug, 2025 NA

Amravati - Maharashtra

Tender For supply of and supplying and installing king size double bed of size 2.05 x 1.80 x 0.40 mtr made from 18 mm thick commercial plywood , supplying of side table of size 0.60 x 0.45 x 0.35 mtr. structure made out of 18 mm thick commercial plywood , providing and fixing in position 12 mm thick cleared toughened glass partition including crystal edge polish fixed in glass profile channel , supplying of bonded foam mattresses of size 1.80 x 2.00 x 0.12 mtr made from bonded foam of 100 mm having 80 density , providing and fixing officers table having 0.75 mtr height made out of 18 mm thick commercial grade plywood , providing and fixing back or side runner of 0.75 mtr. height, structure made from 18 mm thick commercial plywood , providing and fixing signages of various size as per design of white or brown 6 mm imported acrylic sheet , providing and fixing 6 mm thick commercial grade plywood on existing surface with favicol and nails , supplying and providing single seater sofa made out of seasoned nonteak wood str. covered with 75 mm thick high density foam , supplying and providing two seater sofa made out of seasoned nonteak wood str. covered with 75 mm thick high density foam , supplying and providing three seater sofa made out of seasoned nonteak wood str. covered with 75 mm thick high density foam , supplying and providing centre table of size 0.55 x 1.05 x 0.45 mtr. all structure made out of 18 mm thick commercial plywood of approved quality , supplying and providing dinning table made from seasoned indian teak wood structure , supplying and providing dinning chair made from seasoned indian teak wood with melamine polish, cushion seat , supplying and providing dinning table made from seasonproviding and fixing artificial granite in 18 to 20 mm thickness , providing glass etching that creates permanent designs on glass surfaces by removing a layer of the glass , providing and fixing decorative curtain rod in steel pipe of 202 grade of 3or4 with decorative stainless steel finish decorative ends , providing and fixing curtain in attractive shape and pattern in standard width of cloth of 1200 mm with sitching , supplying of stype chair mid back with m.s capsule pipe frame of 16 guage structure with powder coating , providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. , providing and applying priming coat on concreteormasonaryorasbestos cement plastered surfaces including scaffolding , providing and applying pearlorluster finish paint of approved colour and shade to the existing plaster surface , providing and fixing wooden fluted designer pvc interlocking panel having thickness 10 or 12 mm , kitchen trolley providing and fixing stainless steel kitchen trolley of overall 26 inch height and 22inch depth , providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator , providing and fixing stone polymer composite limestone flooring 4 mm thick having strips size 230 mm x 1200 mm mouldable enabling , providing and fixing of glass door with 12 mm thick toughened glass with all fitting like floor spring of cnr , supplying of single bed in attractive shape and pattern of size 2.05 x 0.90 x 0.40 mtr. made from 18 mm thick commercial plywood , supplying and providing bonded foam mattresses of size 0.90 x 2.00 x 0.10 mtr made from 80 mm thick bonded foam , tea table 900mm x 750mm x 450mm form.s. ante chamber providing and fixing of tea table 900mm x 750mm x 450mm , providing visitors four legs chair medium back chair structure made from //bid details 2 / 37 m.s.capsule pipe of 16 guage thickness , providing and fixing meeting hall table of height 0.75 mtr by using commercial 18 mm thick plywood , providing and arrangemnt of mid back, normal syncro mechanism, fixed armrest, gaslift , providing and arrangemnt of high back, synchronized mechanism with multiple locking , providing and fixing in p

CTN :41317538

13 Aug, 2025 NA

East Sikkim - Sikkim

Tender For supply of curtain ring , 3 burner gas stove , zari banner , fish aquarium , bottle cap wall clock , weight trg dumbbells , lil toes eva inter locking play mat 12 mm , solimo modren castle slide , ride swing car , giraffe ride on , wall lamp with glass , drop shape light set of 02 , funny dog wall frame , soft ball , baby go fence jumbo size , vodka wine wall frame 04 pic set , mantra painting set of 07 pic , alcohol quotes wall frame set of 03 pic , wooden partition screen , stainless steel cocktail shaker , white table cloth , metal analog wall clock , green foot mat , pvc floor mat , water heating element , call bell , 4 steel flag pole 4 fit with base , full face helmet , pipe wrench 24 no , pipe wrench 18 no , pipe wrench 12 no

CTN :41136185

11 Aug, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of providing and fixing 12 mm thick prelaminated particle board and misc items e e - providing and fixing of 15 mm thick false ceiling at all heights false ceiling with gypsum plain board , providing and fixing of 15 mm thick false ceiling at all heights with integral densified calcium silicate , providing and fixing 12 mm thick , electric rotary vibrator with needle 35 mm , bamboo providing and fixing of false ceiling at all height including fixing of frame work made of special section power pressed from ms sheet and galvanized with zinc coating of 120 gm per sqm (both side inclusive) as per is-277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges 27mm and 37mm at 12mm centre to centre. one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolt, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.5mm of required length channels 45 x 15 x 0.9mm thick running at the spacing 12mm centre to centre to which the ceiling section 0.5mm thick bottom wedges of 80mm with tapered flanges of 26 mm each to gi intermediate channel with connecting flips made out of 2.64 mm dia x 230 mm long gi wire at every junction including fixing perimeter channel 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed / partition with the help of ravel plugs 450mm centre with 25mm ling dry wall screw @ 230mm inter wall including fixing gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5 x 25mm at 230mm centre to centre including jointing and finishing to a flush finish of tapered and square edges of the board recommended jointing compound jointing tapes finishing with jointing compound in three layer covering of two 150mm on both sides of joints and two core of primer suitable for boards all as per manufacturer specification and deduction of the engineer-in- ) /bid number : gem/2025/b/6447432 * /dated: 19-07-2025 & & / bid document 1 / 13

CTN :41303762

23 Aug, 2025 46.87 Lacs

Delhi - Delhi

Tender For tender for supply of wooden furnishing items at bungalow 20 akbar road c c - providing making and placing in position ss center table of required size , as per approved design the table frame fully shall be made up of stainless steel tubular section with approved powder coating of approved shade 1065x610x760mm ht , providing making and placing in position ss center table of required size as per approved design the table frame fully shall be made up of stainless steel tubular section with approved powder coating of approved shade 1220x610x760mm ht , providing making and placing in position ss side table of size approx 300mm dia and 450mm ht as per approved design the table frame fully shall be made up of stainless steel tubular section with approved powder coating of approved shade and texture fixing 8mm thick black brown glass on the top of the table with required shape and size the cost including all necessary powder coating welding , buffing etc all complete as per direction of the engineer in charge , providing making and placing in position wooden dining chair of size approx 610x580x1010mm ht as per approved design the chair arm side frame front frame headrest front leg back leg back frame , shall be made up of first class teak wood with required size and section finally seat and back shall be upholstered finished stitching with approved shade fabric with help of required 12mm 25mm 50mm thick pu foam of make sleepwell or equivalent elastic niwar casement fibre pad etc , providing making and placing in position wooden sofa two seater as per approved design the inner frame shall be of seasoned and chemically treated marandi wood and legs with first class teak wood finished the sofa legs round with 75mm x 75mm section side frame with 75mm x 35mm section arms with 100mm x 150mm section back vertical -sofa two seater , providing making and placing in position wooden sofa two seater as per approved design the inner frame shall be of seasoned and chemically treated marandi wood and legs with first class teak wood finished the sofa legs round with 75mm x 75mm section side frame with 75mm x 35mm section arms with 100mm x 150mm section back vertical side with 160mm x 40mm section back bottom - sofa three seater , providing making and placing in position wooden chair as per approved design sample the chair legs support , bracket shall be consisting of first class teak wood with required size and section seat frame of the chair shall be made up of 19mm 19mm thick commercial ply of make duro green or equivalent seat and arm frame of chair made up with 12mm thick flexible ply as per required pattern , providing making and placing in position wooden vanity counter of size approx 1620x580x500mm ht as per approved design the vanity top bottom side shutter partition skirting shall be made up of 18mm thick hdhmr ply of action tesa or equivalent make finished with 1mm laminate on inner side and unit back shall be consisting , providing making and placing in position ss dining chair of size approx 610x580x1010mm ht as per approved design the chair side frame front frame headrest front leg back leg back frame shall be made up of stainless steel round square tubular section finally seat and back shall be upholstered , providing making and placing in position wooden palmet of size approx 240mm depth and 220mm front face width as per approved design , the palmet top front sides shall be made up of 18mm thick hdhmr ply om action tesa or equivalent make finally finish all the wooden area with high quality high gloss polish of sirca or equivalent make , manufacturing and placing of sofa two seater the inner frame shall be of seasoned and chemically treated marandi wood finished backrest top with 100mm x 70mm wooden section round corner top with 150mm x 70mm wooden section side vertical support with 70mm x 30mm section backrest vertical frame with 70mm x 30mm section backrest bottom vertical support with 70mm x 30mm section seat frame with 70mm x 30mm

CTN :41280763

12 Aug, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of partition frame with expanded metal as par drawing number: vp10152 alt. nil, alternat e material: grade rdso spec. c-k201 x2crni12 (409m) is permitted in place of gr. 409 if required pac king condition: pi042 ver. 1.0 [ warranty period: 96 months after the date of delivery ]

CTN :41296607

08 Aug, 2025 21.33 Lacs

Patna - Bihar

Tender For construction of 04 nos school building at central university of south bihar panchanpur, gaya sh providng and fixing aluminium frame partition, supplying and installation of work station and furniture in o/o adg(patna), cpwd, patna at 2nd floor in karpoori thakur sandan ashiayana digha road, patna ( bihar)subwork/packages:aluminium frame & partition

CTN :41252569

03 Sep, 2025 NA

Kanchrapara - West Bengal

Tender For supply of honeycomb partition frame set for ac 3tier(eog) coach. as per technical specificati on no mdts 097 rev 01, planning set list no. mplhcpf3aceglhb version 23, packing instruction - pi118 ver.01 or latest version as per mcf pl. no. 33574662 [ warranty period: 30 months after the date of del ivery ]

CTN :41209335

04 Aug, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of upgradation and maintenance of f coy c c - vinyl flooring sheet , curtains for doors and windows , curtains rod with accessories , partition work with 1.5mm square pipe frame and profile sheet including material and labour charges , ro plant 100 lph , sintex water tank 500 ltr

Inspection Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government