Latest instrumentation system Tenders | Government instrumentation system Tenders

CTN :40052871

29 Apr, 2025 NA

Multi City - Multi State

Tender For renovation and modernization of control and instrumentation system of durgapur cpp-ii(2x60 mw)

CTN :40031512

01 May, 2025 NA

Usmanabad - Maharashtra

Tender For supply of clavicle plate set and other implants in gmc dharashiv - clavicle plate set , clavicle nai set , lateral end clavicle plate set , proximah humerus plate set , shaft humeurs plate set , humerus nail set , distal humerus plate set , pelvice or acitobulum set , distal end radius plate set , distal medial low bend tibia plate set , antrolateral tibia plate set , calcanium plate set , distal febula plate set , 4.0mm reconcustruction plate set , 4.0mm cc screw set , radia head plate set , proximal medial tibia t plate , postero meidal tibia plate set , raft plate set , radius or ulna ex fixator , distal femur plate set , proximal l tibai plate set hockey plate , proximal femur plate set , distal medial femur plate set , t- buttress locking plate set , l-buttres locking plate set , 6.5mm cc screw set , herbert screw set all sizes , femur nai set , tibia nail set , expert tibia nail set , supra pattela nail set , tfn nail set , long pfn nail set , supracondylar dista femur nail set dimsc nail , tibia and femur ex-fix clamp or conection rod , dhs set , lrs set , fix bipolar un cemented , fix bipolar cemented or syringe kit or restractor kit or cement , modular un cemented ha coated , modular un cemented press fit , modular bipolar cemented , 2.7mm cortical screw , 2.7mm cortex lock screw , 3.5mm cortical screw , 3.5mm lock cortex screw , 3.5mm lock cancellous screw , 4.5mm cortical screw , 5.mm loc cortex screw , 5.mm loc cancellous screw , 6.5mm lock cancellous scrwe , simplex bon cement , syringe kit , femur restractor , 1.5mm mini screw , 2.mm min screw , 2.mm min plate , k wire set all sizes , stiemmen pin , broken screw removal set , nail removal set for tibia femur humerous , washer , ss wire real , 6.4mm proximal bolt , 8.0mm pen bolt , herbert screw set , guied wire for pfn , 4.0mm locking bolts , 5.0mm locking bolts , ten nail flexible tens nail all sizes , dimsc nial set , recond plate 3.5 or 4.5 , tubular set , anatomical plate fibula set , amp prosthesis , calcaneum plate , schanz pin , humerous nail set , pedicle screw monoaxial , pedcle screw poly axial , spile instrumentation set , tlif cage set , connectiong rod set , innie set , cervicle spine acdf plate , total knee replacement set indian , total knee replacement ceramic , total knee replacement indian cemented and uncemented , total hip replacement ceramic cemented and uncemented , pelvic plates set , knee arthroscopy screw set , knee arthroscopy anchor set , knee arthroscopy endo button , knee arthroscopy switcher anchor , radial head prosthesis , herbert screw , pfna 2 set , knee arthroscopy fibrewire

Central Government And Public Sector

CTN :40041989

08 May, 2025 70.26 Lacs

Mumbai - Maharashtra

Tender For providing of custom bid for services - miscellaneous works for operation and maintenance of electrical, electronics and instrumentation systems in various facilities of frd barc trombay mumbai 400085

CTN :40030362

16 May, 2025 2.50 Crore

Ernakulam - Kerala

Tender For empanelling of ortho implant items - k-wire 1.2 mm, 1.mm, 1.6mm,1.8 mm,2 mm, 3.5 dcp-5, 6,7,8,9,10,11,12, hole, 3.5 lcp-5, 6,7,8,9,10,11,12, hole, 3.5 cortical screw-full set, 3.5, locking coritical,locking cancellous screw, ellis t. plate -3.5 system -3, 4, 5, 6, 7[ordinary and locking ], 4.5 narrow dcp -4,5,6,7,8,9,10, hole, 4.5 narrow lcp -4,5,6,7,8,9,10 hole, 4.5 cortical screw-full set, 4.5 locking, cortical locking,cancellous screw-full set, 4.5 broad dcp-4,5,6,7,8,9,10,11 hole, 4.5 broad lcp-4,5,6,7,8,9,10,11 hole, 4.5 cortical screw, locking cortical, locking cancellous screw-full set, philos plate [ ordinary and locking ] -3,4,5,6,7b hole, 3.5 cortical locking, locking cancellous screw - full set, 1/3 tubular plate[ ordinary and locking -4,5,6,7,8,9,10,11,12 hole, 3.5 recon plate -4,5,6,7,8,9,10,11,12 hole, 4.5 recon plate-4,5,6,7,8,9,10,11,12 hole, distal humerus locking plate [r] and [l]-full set upto 14 hole, distal tibial hybrid locking plate [full set] with screw upto 14 hole, proximal tibial locking plate-full set with screw, 4.5 t. plate-full set, liss plate (full set), 4.5 l plate-full set, steinman pin -3.5 mm,4 mm,4.5 mm,5mm, schanz pin -4.5 mm and 3.5mm, universal clamp - full set, universal rod-full set, rod to rod clamp = full set, dhs-full set-, ender nail 3.5& 4.5-full set, imsc nail implant with instrumentation- full set, pfna2-full set implant with instrumentation, pfna3-full set implant instrumentation, amp-full set, amp-full set-narrow stem, bipolar prosthesis-full set, modular bipolar prosthesis-full set, dcs full set, proximal femur locking plate-full set, olecronan locking plate-full set with screw, calcaneum lcp-full set with screw, clavicle lcp full set with screw, distal. clavicle lcp full set with screw, rush nail 2mm, 2.5mm ,3mm,3.5mm, 4mm,4.5mm, radial square nail 1.5mm, 2mm,2.5mm,3mm,3.5mm,4mm, ulnar square nail 1.5mm, 2mm,2.5mm,3mm,3.5mm,4mm, acetabular reconstruction plate-full set with screw matta, 1.7mm mini lcp-full set, pedicle screw with implant and insrtumentation [titanium-polyaxial] gesco, acl reconstruction implant+insrtumentation -arthrex (cemented & uncemented), drill bit-2mm,2.5mm,2.7mm,3.2mm,4mm,6mm, locking drill bit-2mm,2.5mm,2.7mm,3.2mm,4mm,6mm, total knee replacement-implant+ instrumentation, revision total knee replacement-implant+ instrumentation, total hip replacement-cemented & uncemented implant+ instrumentation, revision total hip replacement-implant+ instrumentation, 61. total shoulder replacement implant+ instrumentation, 62. reverse shoulder replacement implant+ instrumentation, 63. total elbow replacement implant+ instrumentation, 64. radial head relacement implant+ instrumentation, 65. variable angle lcp distal femur full set, 67. il nail femur, 68, il nail tibia, 71. modified jess set, 72. lrs, 73. ilizarov set- full set, 74. thomas splint-[all sizes ] buelcacl pappas, distal. clavicle universal nail extraction set, tens nail full size with instrumentation, broken implant removal set, clavicle brace full set, tennis elbow strap, special / ordinary shoulder immobilizer, cervical collar- hard/soft, philadelphia collar, taylors brace, ls corset, wrist splint right/left, knee immobilizer, crepe bandage 5/7/8/10/15 femur,tibia,forearm,humerus, dynaplast 10/15, forearm splint, wrist drop splint 80 t0 97 full set, foot drop splint, finger cot splint, knuckle bender splint, thumb spica splint, arm pouch, ankle binder, wrist binder, walker foldable & fixed, axillery critches, elbow critches, hip u drape, orthokit, cautery lead, suction tip, romovac suction drain 10, 12, 14, skin stapler, vicryl os needle full set, ethibond full set, bone wax, antibiotic bone cement 20 gm, 40 gm, stimulan 5gm , 10gm, 25gm, g bone granules and block, pulse lavage, cling drape, stockinette, knee o drape, arthroscopic drape 10, 12, 14, 16, 18, surgical mop, sofratulle [bactigrass ]

State Government

CTN :39984717

18 Apr, 2025 NA

Calcutta - West Bengal

Tender For supply of following items for setting up measurement and instrumentation lab for 4 year b.tech in electrical engineering curriculum and application for university of calcutta. - experimental set-up for calibration of a wattmeter using dc potentiometer with following features/items:regulated power supply 2 volts, 100 ma to operate the potentiometer.calibrated electronic standard cell voltage 1.0186 volts.regulated power supply 0-5 volts/0.5 amps with milliammeter 0- 500ma for current coil of wattmeter.regulated high voltage power supply 0-250 dc volts with voltmeter 0-250 volts for pressure coil of wattmeter.a panel mounting wattmeter 0-125 watt is required to perform the experimentgalvanometer for null balance.a volt ratio box for measurement of higher voltage.complete circuit diagram with wattmeter connections to be provided on the front panel of the instrument.with standard accessories, experimental set-up for low resistance measurement using kelvin s double bridge with following features:range: 0.2 micro ohm to 11 ohms, with an accuracy of 0.05 %required accessories:spot reflecting galvanometer. dc source 10 a with one analog current meter. attachment of 1 meter length.brass clamp with terminals for zero setting. with standard accessories, experimental set up for unknown capacitance measurement using de-sauty s bridge with following specifications:source: sine wave signal of 1khz. the amplitude of ac switch indicating lamp is provided on the bakelite board. two sockets are to be provided for the output of ac signals.detector: for detecting small ac signals in the output, null detector is required as in-built with digital display.circuit diagram:the circuit layout on the board is to be provided out to facilitate convenient working. 4 or 5 mm socket required for making connection. features:r2 --- three decade resistance dials having value 10 1000, 10 100 and 10 10 ohmsr1 ---- single decade resistance dial having value 10 100 ohmsc1 ---- unknown capacitor.c2 ---- two fixed standard capacitors having value 0.01mfd 0.1mfd (loss free)with standard accessories, experimental set-up for calibration of a 1-phase watt-hour meter with following scopes: to adjust & calibrate a single-phase energy meter by direct loading method to adjust & calibrate a single-phase energy meter by comparing with a sub-standard meterspecifications: static energy meter single phase: under test (local) duly mounted, wired and terminated static energy meter single phase: sub-standard meter (isi mark) duly mounted, wired and terminated voltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v ac ammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a ac wattmeter: dynamometer type ac single phase, multi-range with current coil 5 / 10 amp and potential coil 75 / 150 / 300 v ac variac: variable voltage transformer (portable table / floor mounting type with enclosure) input: 230v ac and output: 0 270v / 8 amp ac variable load: made up of 3 load resistors of 70 ohms / 700 w each duly mounted and connected / terminated to form different loads (35 to 210 ohms) as per external connections digital stop clock: portable with start / stop & reset operation set of necessary 4 mm spring loaded patch cords for interconnections detailed instruction manual supply to be connected: 230v, 1phase, 50 hz, ac mains, experimental set-up for calibration of a 3-phase watt hour meter with following specifications: to adjust & calibrate a three-phase energy meter by direct loading method to adjust & calibrate a three-phase energy meter by comparing with a sub-standard meterspecifications:static energy meter three phase: under test (local) duly mounted, wired and terminatedstatic energy meter three phase: sub-standard meter (isi mark) duly mounted, wired and terminatedvoltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v acammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a acwattmeter:

CTN :38965881

21 Apr, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras supply, installation, commissioning & testing of field instrumentation system for process plant

CTN :39967115

18 Apr, 2025 NA

Howrah - West Bengal

Tender For supply of 6 axis deformity /fracture correction system - system should consist of a six axis frame that can be used with any ring fixation parts & should be assisted by computer software for achieving precise d eformity correction, with residual deformity correction feature. a frame should include the following parts: 1 )strut assembly for deformity correction : 6 nos, 2) ring connection plate assembly %u2010 straight: 6 no s , 3) ring connection plate assembly %u2010 z shaped : 3 nos, 4) strut labels %u2013 set of six : 1 set, 5 ) x ray markers for strut %u2013 set of 6 : 1 set a frame shall be constructed out of above parts duly supp orted with following instrumentation: 1) combination wrench 12 mm : 2 no., 2) combination 8 mm : 2 no. , 3) allen key : 1 no. ,4) measuring device : 1 no. ,5) container : 1 no. software duly supporting the analytica l ability to measure bone positions & should be able to make complex mathematical evaluations thereby off ering prescription for a patient to adjust the struts lengths on day to day basis, for achieving correction of d eformity at the end of the treatment period. the software should provide for residual deformity correction. the software should also have the ability to be placed on any windows based computer system & should n ot require any internet connection. general specifications 1) the frame should be a six axis, computer soft ware based external fixation device to be used for a wide range of applications for fracture reduction & def ormity corrections of lower limbs, upper limbs, foot & knee. 2) the struts should have the ability to provide compression or distraction of every 0.50 mm 3) the struts should offer both %u201cgradual correction mo de%u201d & %u201cfast strut%u201d mode. 4) the struts should be able to work with supports of any e xternal frame of any geometry, including 5/8 rings. 5) the struts should not have any predefined places of f ixation to support & should offer freedom to be fixed to the stabilization supports, such as rings, 5/8 ring, p osts, connection plates etc. 6) the software of the apparatus should have the flexibility of being placed on any windows based laptop or desktop & should not require any internet connection for usage. 7) the softw are should have the ability to work with the x%u2010ray images which are inserted into the software for ev ery case. 8) the software must have the protection from human error with the data input. 9) the software must incorporate standard tracing of anatomic and mechanical axes of bone fragments, planning and visua lization. 10)the software should have the facility of showing the virtual (real) position of fragments after t he treatment. [ai (2024-25) , item code no.s-61125, sl no.1380 ]

Central Government/Public Sector

CTN :39910435

21 Apr, 2025 34.84 Lacs

Kalpakkam - Tamil Nadu

Tender For providing of facility management services - lumpsum based - dfrp,rpg,igcar; surveillance and maintenance of various electronics and instrumentation systems in radioactive areas at dfrp, rpg, igcar, kalpakkam; consumables to be provided by buyer

CTN :39881295

21 Apr, 2025 17.79 Lacs

Darjeeling - West Bengal

Tender For supply of d ifa re 16 dispo karman cannula size 9 , d ifa re 16 dispo minispike , d ifa re 16 disposable hair trimmer blades for surgical preparation , d ifa re 16 laproscopic marryland dissector , d ifa re 16 laparoscopic suction cannulae 5mm , d ifa re 16 rebreathing bag 1 half 2 ltr , d ifa re 16 scratch pad , d ifa re 16 tube neonetal trochar chest tube 12 fr , d ifa re 16 wooden tongue depressor spatula , d ifa re 16 cannulaid size0 , d ifa re 16 rams cannula size0 , d ifa re 16 disposable ear suction tips , d ifa re 16 disposable ferguson suction set of 4 , d ifa re 16 disposable maxillary antrum suction curved , d ifa re 16 epistaxis balloon catheter size 7dot5cm , d ifa re 16 disposable snare tonsil wire for sdotwdotgdot25 hank of 15 gm , d ifa re 16 disposable ear speculum slotted 4 sizes only black , d ifa re 16 tracheostomy tube single lumen sizes 3dot5456 01 of each size , d ifa re 16 tracheostomy tube single lumen sizes 789 02 of each size , d ifa re 16 surgicel size 2 4 box of 10 fibrillar , d ifa re 16 anti fog solution with 4 alcohol concentration 10box , d ifa re 16 nasal packing pva 4dot5cm , d ifa re 16 nasal packing 10 cm , d ifa re 16 needle ataumatic 8 mm 3 8 circle reverse cutting micro point gut plain with double armed spatulated needle 80 pkt of 12 vicryl , d ifa re 16 needle ataumatic 8 mm 3 8 circle reverse cutting micro point gut plainwith double armed spatulated needle 60 pkt of 12 vicryl , d ifa re 16 bismuth iodofrom paraffin paste 10gm , d ifa re 16 euroband pettiband 6 75mm , d ifa re 16 euroband pettiband 12 50mm , d ifa re 16 nasal splint aluminium pkt of 10 , d ifa re 16 tracheatube introducer boigie 5fr , d ifa re 16 total ossicular replacement prosthesisteflon , d ifa re 16 partial ossicular replacement prosthesisteflon , d ifa re 16 grommet tubes shephardshah , d ifa re 16 cartridge for printer 054 , d ifa re 16 disposable ear speculum for otoscope adult , d ifa re 16 disposable ear speculum for otoscope paed , d ifa re 16 epistaxix balloon catheter paediatric , d ifa re 16 ophthalmic surgical eye pad with adhesive patch , d ifa re 16 schirmers test strip pack of 100 , d ifa re 16 veritas dispoable bimanual irrigation aspiration cannula set , d ifa re 16 suture anchors 5 mm titanium with two preloaded sutures of different colours colour coded usfda approved , d ifa re 16 non absorbable braided polyester size nodot5 with half circle round body needle with reverse cutting point 75 to 100 cm lengthdot usfda approved , d ifa re 16 femoral cortical suspension device titanium with self adjustable loop full nomenclature as in pdf , d ifa re 16 sterile poly etheretherketone peek interference screws 8mm diameter 23mm lengthcompliant full nomenclature as in pdf , d ifa re 16 sterile poly etheretherketone peek interference screws 9mm diameter 23mm lengthcompliant full nomenclature as in pdf , d ifa re 16 sterile poly etheretherketone peek interference screws 8mm diameter 28mm lengthcompliant full nomenclature as in pdf , d ifa re 16 sterile poly etheretherketone peek interference screws 9mm diameter 28mm lengthcompliant full nomenclature as in pdf , d ifa re 16 titanium 2dot8mm suture anchor with one preloaded braided polyester suture usfda approvedregistered usfda approved , d ifa re 16 knotless suture anchor 2dot9 mm peek material 0dot1 mm variation in size acceptable compatible instrumentation to be provided on loan by supplier full nomenclature as in pdf bid details/ 2 / 47 , d ifa re 16 nonabsorbable suture braided polyester nodot5 usfda approved

State Government

CTN :39876359

30 Apr, 2025 1.79 Crore

Surat - Gujarat

Tender For biennial rate contract for control and instrumentation systems at surat lignite power plant - 4x125 mw, phase 1 & 2 for a period of two years (2025-27)

Instrumentation System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

State Government