Latest insulated plier Tenders | Government insulated plier Tenders

CTN :45503357

29 Jun, 2026 23.46 Lacs

Jaipur - Rajasthan

Tender For supply of insulated plier 8 inch,screw driver 8 inch, phase tester

CTN :45482035

15 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

State Government

CTN :45463230

16 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of genral electrical goods- 3 phase a.c. induction motor, 10 kw, 15 hp 1440 rpm duty s1 volt 415, make- abb , 3 phase a.c. induction motor, 7.5 kw, 10 hp 1440 rpm duty s1 volt 415, make- abb , "3 phase slipring induction motor (wound rotomotor) 40 hp, 970 rpm, duty -s4 foot mountedcane unloader duty, make- cg power" , 3 pin socket 6 amp make anchor , 3 pin top make anchor 6 amp allen key 1.5 mm to 10 mm, aluminium cable lugs dowells make, angle grinder 5" make bosch, backtol gray varnish 1 kg tin, bajaj make ciling fan 1200 mm white , combined switch with box anchor 16 amp, complete electric coil heater 1500 watt, condensor ancap make, contineuty tester make taparia, copper cable lugs dowells make, crc 2-26, crompton ceiling fan 1200 mm white, d spaner set 6x7 to 30x32mm, double tail carbon brush size 16x18x38 mm, double tail carbon brush size 16x32x38 mm, double tail carbon brush size 22x32x40 mm, double tail carbon brush size 50x25x50 mm, double tail carbon brush size 50x25x65 mm, electronic fan regulator anchor make, empire tape 1 ", eveready pencil cell 1.5 voltsize aa, finned type air heater 1000 watt 220 volt , finned type air heater 2000 watt 220 volt , foot switch element make bch, had driver megger 500v make waco, heater element 1500 watt, heavy duty battery make eveready 9 volt, insulated pliers make taparia, led bulb 12 watt make bajaj , led bulb 9 watt make bajaj , led flood light 100 watt make bajaj , led flood light 100 watt make surya, led flood light 100 watt makeorient, led flood light 200 watt make bajaj , led flood light 200 watt make orient, led flood light 200 watt make surya, led flood light 50 watt make bajaj , led flood light 50 watt make orient, led flood light 50 watt make surya, led rechargable tourch light eveready make, led tube light 12 watt length 2 feet make bajaj, led tube light 12 watt length 2 feet make orient, led tube light 12 watt length 2 feet make surya, led tube light 20 watt make bajaj, led tube light 20 watt make orient, led tube light 20 watt make surya, line tester make taparia, loc tite 641 50 ml, metal drill bit set size 10 mm make bosch, metal exhaust fan blade 12" with hub , metal exhaust fan blade 18" with hub , piano type switch 6 amp make anchor, plycab make ceiling fan 1200 mm white, pt bulb 100 watt 24 volt anchor make, pt bult 100 watt 240 volt make bajaj , pt button holder anchor make, pt holder bakelite make anchor make, puch button & element make teknic green, puch button & element make teknic red , push button element -e1 cat no se-06 teknic make, pvc gitti 2", resistance box for 40 hp, 790 rpm motor, ring spaner set 6x7 to 30x32mm, screw driver 4&2 way 12" make taparia, slipring carbom holder for 7.5 hp motor, slipring for 7.5 hp motor id 65 mm od 118 mm l 84 mm, slipring holder mounting for 7.5 hp motor, soldring iron 25 watt make tony , soldring iron 35 watt make tony , soldring waire 1 mm 250 gram roll , steel grip pvc tape , thinner t-205, tong tester clamp meter make meco, wall drill bit size 6.5 mm

CTN :45456761

18 Jun, 2026 NA

Kalol - Gujarat

Tender For supply screw driver, insulated plier, line tester and torch for line staff and meter tester of kalol division

CTN :45298794

08 Jun, 2026 NA

Patiala - Punjab

Tender For corrigendum : supply of insulated pliers

State Government

CTN :45377938

15 Jun, 2026 NA

Multi City - Multi State

Tender For supply of insulated pliers

Central Government/Public Sector

CTN :45302364

27 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned ferrous foundry skull with or without embedded ferrous, refractory and other material as available in the lot area including small skull pieces. note: purchaser can inspect the materials thoroughly before e-auction. purchaser should lift the all type of ferrous foundry skull in the lot area to complete the quantity successfully. loose ferrous items, which are available in and around lot area, are not permitted for delivery. however, ferrous items embedded with skull, which cannot be removed ordinarily by hand shall be permitted while loading. cutting is permitted up to loadable size in to the truck. lot shall be delivered as is where is basis only. note: no domestic da/lpg/oxygen cylinders is permitted. only commercial type of da/lpg/oxygen cylinders are permitted for cutting of ferrous foundry skull. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

CTN :45261189

05 Jun, 2026 NA

Bulandshahr - Uttar Pradesh

Tender For supply of tube cleaning equipment - heavy duty truck head brushes , heavy duty coke plate tool head cutter , extra heavy duty quality flexible shaft , foundry brush , m.s. scrapper , sugar bag trolley , sugar bag nylon flat wheel , spares of flexible shaft , hand piece side innercore nipple , m.s. nipple , spares bearing , nipple , double sprill double wounded brush , tube descalling motor , tube cleaning equpments , heavy duty flexible shaft , cup shape steel wire brush

State Government

CTN :45228140

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For general electrical goods - heavy duty battery make eveready 9 volt , eveready pencil cell 1.5 voltsize aa , led rechargable tourch light eveready make , foot switch element make bch , puch button & element make teknic red , puch button & element make teknic green , push button element -e1 cat no se-06 teknic make , led tube light 12 watt length 2 feet make bajaj , led tube light 12 watt length 2 feet make orient , led tube light 12 watt length 2 feet make surya , finned type air heater 1000 watt 220 volt , finned type air heater 2000 watt 220 volt , complete electric coil heater 1500 watt , heater element 1500 watt , slipring holder mounting for 7.5 hp motor , slipring carbum holder for 7.5 hp motor , slipring for 7.5 hp motor id 65 mm od 118 mm l 84 mm , pt bult 100 watt 240 volt make bajaj , pt holder bakelite make anchor make , pt button holder anchor make , pt bulb 100 watt 24 volt anchor make , electronic fan regulator anchor make , metal exhaust fan blade 18" with hub , metal exhaust fan blade 12" with hub , double tail carbon brush size 22x32x40 mm , double tail carbon brush size 16x32x38 mm , double tail carbon brush size 50x25x50 mm , double tail carbon brush size 50x25x65 mm , double tail carbon brush size 16x18x38 mm , soldring iron 25 watt make tony , soldring iron 35 watt make tony , soldering wire 1 mm 250 gram roll , angle grinder 5" make bosch , metal drill bit set size 10 mm make bosch , wall drill bit size 6.5 mm , had driver megger 500v make waco , long tester clamp meter make meco , continuity tester make taparia , screw driver 482 way 12" make taparia , line tester make taparia , insulated pliers make taparia , d spaner set 6x7 to 30x32mm , ring spaner set 6x7 to 30x32mm , allen key 1.5 mm to 10 mm , led flood light 50 watt make bajaj , led flood light 50 watt make orient , led flood light 50 watt make surya , led flood light 100 watt make bajaj , led flood light 100 watt make orient , led flood light 100 watt make surya , led flood light 200 watt make bajaj , led flood light 200 watt make orient , led flood light 200 watt make surya , led bulb 9 watt make bajaj , led bulb 12 watt make bajaj , led tube light 20 watt make bajaj , led tube light 20 watt make surya , led tube light 20 watt make orient , piano type switch 6 amp make anchor , 13 pin socket 6 amp make anchor , combined switch with box anchor 16 amp , 13 pin top make anchor 6 amp , steel grip pvc tape , empire tape 1" , crc 2-26 , loc tite 641 50 ml , plycab make ceiling fan 1200 mm white , crompton ceiling fan 1200 mm white , bajaj make ciling fan 1200 mm white , pvc gili 2" , backtol gray varnish 1 kg tin , thinner t-205 , copper cable

Central Government/Public Sector

CTN :45134658

19 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned rubbles including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. delivery will be given from road approaching point in one direction only note : purchaser should lift all the residuals as available in the lot including rubbles, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing rubbles, mud, ash content by scooping all simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Insulated Plier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector