Latest insulating liners Tenders | Government insulating liners Tenders

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

Central Government / Public Sector

CTN :45698598

06 Jul, 2026 NA

Mahabubnagar - Telangana

Tender For supply of g.i. snap head pin 20x55mm with washer & copper. split pin 4x40 mm as per rdso specification ti/spc/ohe/fasteners/0120 (mar 2013). make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45567479

06 Jul, 2026 NA

Mahabubnagar - Telangana

Tender For corrigendum : supply of g.i. snap head pin 20x55mm with washer & copper. split pin 4x40 mm as per rdso specification ti/spc/ohe/fasteners/0120 (mar 2013). make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45666527

03 Jul, 2026 NA

Luckwada - Chhattisgarh

Tender For supply of 1700005139 ms plain washer 6 6x12 5x1 6 , 2100001044 ms plain washer 11x 21x2 mm , 1700001051 hex bolt nut ms m10x25mm ful thd gr 6 6 , 1700001052 hex bolt ms m10x40mm gr 6 6 , 1700001056 hex bolt ms m16x65mm gr 6 6 , 1700001070 hex bolt ms m20x65mm gr 6 6 , 1700001078 hex bolt nut ms 16mmx65mm gr 6 6 , 1700001079 hex bolt ms m16x100mm gr 6 6 , 1700005117 m 20 x 75mm ms hex , 1700005118 m 20 100mm ms hex , 1700005119 m16 125mm ms hex , 1700005129 copper rivet 5 16 , 1700005135 ms plain washer 26x44x4 mm , 1700006186 belt fasteners 2 , 1700006650 bolt nut 3 x 1 2 , 1700007709 belt fastener 2 1 2 , 1700007851 m s hex head nut bolt 20x125 , 1700009588 ms hex bolt with nut m12 x 50mm

Central Government/Public Sector

CTN :45652682

21 Jul, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : item description: supply of copper rivets of size 6x45 mm as per is : 2907-1998 and rdso specification no.ti/spc/ohe/fasteners /0120 rev-1 (march-2017 or latest). [ warranty period: 30 months after the date of delivery ] ]

CTN :45664831

30 Jun, 2026 NA

Ranchi - Jharkhand

Tender For supply of cctv camera full setup sl. no. description specification qty. 1 ip bullet camera 5 mp, outdoor, ir-enabled, poe compatible 05 nos. 2 ip dome camera 5 mp, indoor, ir-enabled, poe compatible 05 nos.3 hard disk drive (surveillance grade) 4 tb capacity 02 nos. 4 poe switch 8-port gigabit poe switch 02 nos. 5 network switch 16-port gigabit managed/unmanaged switch 01 no. 6 ups system online ups, 3 kva with minimum 120 minutes backup including batteries 01 set 7 power cable 2 sq.mm copper cable 180 mtr. 8network & associated cabling materials cat-6 cable, hdmi/vga cable, patch cords (3 m), rj-45 connectors, flexible pipes, cable ties, fasteners, clamps, saddles, junction boxes and other installation accessories as required 9 pvc/gi conduits suitable size for cable protection and routing approx. 500 feet 10 display unit 75-inch 4k uhd commercial grade led display, 24 x 7 operation rated (sony/samsung/lg or equivalent approved make) 01 no. all cameras shall support h.265/h.264 compression, onvif protocol and poe operation. hdds shall be surveillance-grade continuous recording for 30 days display unit shall be commercial-grade and designed for continuous operation. all cables, connectors and accessories shall be of reputed make and conform to relevant standards. the contractor shall provide all minor materials and accessories not specifically mentioned but required for successful completion of the work. the system shall be supplied, installed, tested and commissioned as a complete turnkey solution. [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45548622

20 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : fabrication and supply of 6400 mm over riding curved fan shaped switches 1 in 8.5, bg, 60kg. (uic) on psc sleeper as per rdso drawing no. t-4966 with latest alteration and specifications irs:t-10-2025 (with latest amendment i.e. 30 days prior to date of tender opening), complete with all parts including check rails & excluding standard fish plate and bolts, plate screw, e.r. clips, liners, gr pads and insulating liners (list of fittings attached as annexure- c). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] [ rate of supply 30 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45405511

15 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For corrigendum : running contract for manufacture and supply of 10125 mm thick web curved switches with check rails for 25t axle load with complete fittings as per rdso drg. no. t-9791 (alt-02) and spring setting device as per drg. no. t-6216 with latest alteration, including metal liner, pocket type ncr-grsp (10mm thick) but excluding standard fish plates, standard fish bolts & nuts, elastic rail clips, hvn insulating liners. pre-curving of tongue rail & stock rails for turnouts of similar & contrary flexure shall be done whenever required, without additional payment, in accordance with rdso's guidelines of pre-curving issued vide letter no. ct/ptx/tws design dated 27.07.2018. the stock rail shall be in 60e1 rail profile of r-260 grade and tongue rail shall be in 60e1a1 rail profile of r-260 grade as per irs specification no. t-12 and irs specification no. t 10 2025 and irs no. irs no. t 62 2025. " as per note sl no. 27 of rdso drg. no. t-9791, alt-02, "10% quantity (i.e. 1/10th of the quantity of purchase order of 1 in 12 60e1a1-tws) of breakage prone and wear prone spare parts (shown in part-c of rdso/t-9791, alt-02, annexure-b. ) shall be supplied with every purchase order of 1 in 12 60e1a1-tws for replacement of these spare parts as per need during service life of the 1 in 12 60e1a1-tws ".note:- (i) the rate includes cost of stock rails, tongue rails and check rails. note:- (ii) ncr grsp shall be procured from rdso approved vendors only as per irs specification no. t- 55-2025 (revision-1) and with process inspection by rites (non-tpi) note:- (iii) spring setting device shall be procured from rdso approved vendors only as per irs specification no. t- 54 (revised - 2024) note:- (iv) list of fittings is enclosed as annexure-a . note:- (v) list of breakage prone and wear prone spare parts is enclosed as annexure-b. note:- (vi)the lh & rh quantity bifurcation is as under- lh = 400 sets & rh = 400 sets. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45643354

21 Aug, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing and supply of end cut hvn-66 insulating liners for provision at fish plated joints to rdso/drg. no. t-10233 & t-10234 (alt.-1) use with psc sleepers (t-2496) suitable to 52 kg rail, and conforming to irs specification no. t-44-2025 (third revision) [ warranty period: 30 months after the date of delivery ][ rate of supply 30000 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45643512

31 Aug, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing and supply of end cut hvn-66 insulating liners for provision at glued joints to rdso/drg. no. t-10236 & t-10237 (alt.-1) use with psc sleepers (t-2496) suitable to 52 kg rail, and conforming to irs specification no. t-44-2025 (third revision). [ warranty period: 30 months after the date of delivery ][ rate of supply 15000 units per month , commencement time allowed -1 month ]

Insulating Liners Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors