Get complete information related to latest Insulation Compound Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Insulation Compound Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Insulation Compound Tenders.
Tender For corrigendum : supply of carriage and erection of 11kv by 400v transformer 250 kva , carriage and erection of 11kv by 400v transformer 63 kva , carriage and erection of 11kv by 400v transformer 25 kva , carriage and erection of transformer 11kv by 2 and half kv 16 kva single phase , carriage and erection of pcc pole 8 and half meter , carriage and erection of pcc pole 11 meter , carriage and erection of 11 kv v type steel cross arm , carriage and erection of 11 kv polymeric disc insulator t and c type 45 kn , carriage and erection of 11 kv disc fitting t and c type 45 kn , carriage and erection of 11 kv pin insulator polymeric , carriage and erection of 11 kv gi pin with nut bolt , carriage and erection of 11 kv tpmo with polymer insulator , carriage and erection of lt xlpe cable a1 3 and half into 400 sq mm , carriage and erection of lt xlpe cable 3 and half into 70 by 35 sq mm , carriage and erection of lt abc 3 into 95 plus 1 into 70 plus 1 into 16 sqmm , carriage and erection of lt abc 3 into 120 plus 1 into 95 plus 1 into 16 sqmm , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of lt distribution box single phase , carriage and erection of lt distribution box three phase , carriage and erection of plinth , carriage and erection of fencing , carriage and erection of water level earthing , supply and carriage and erection of dp holding clamps for top channel tpmo and fuse set etc with bolts nuts , supply and carriage and erection of stone pad , supply and carriage and erection of concreting of pole , supply and carriage and erection of concreating of stay , supply and carriage and erection of danger board , supply and carriage and erection of number plate , supply and carriage and erection of barbed wire ) /bid number : gem/2026/b/7554223 * /dated: 20-05-2026 & & / bid document 1 / 36 including jumper , supply and carriage and erection of henley type tailless unit protection cubical pannel 500 amp 650 v for 250 kva dt , supply and carriage and erection of copper l piece 50 into 225 into 10 mm ls , supply and carriage and erection of copper l piece 62 into 225 into 12 mm ls , supply and carriage and erection of a1 leg long barrel of size ls , supply and carriage and erection of ms channel dropper 100 into 50 into 2028 mm for fuse set , supply and carriage and erection of ms top channel 125 into 65 into 2240mm , supply and carriage and erection of ms channel 125 into 65 into 1300mm t off , supply and carriage and erection of 11 kv fuse set , supply and carriage and erection of lt pvc cable 4 into 16 sq mm , supply and carriage and erection of lt pvc cable 3 and half into 150 by 35 sq mm , supply and carriage and erection of lt fuse set 25 kva , supply and carriage and erection of ms angle 75 into 75 into 6 into 2028 mm , supply and carriage and erection of suspention clamp , supply and carriage and erection of dead end clamp , supply and carriage and erection of eye hook , supply and carriage and erection of j hook , supply and carriage and erection of clamp for distribution box , supply and carriage and erection of piercing connector , supply and carriage and erection of clamps for lt toff with nut and bolt , supply and carriage and erection of pg clamp , supply and carriage and erection of 11 kv v type steel cross arm clamp with nut and bolt , supply and carriage and erection of cross arm holding clamp with nut and bolt , supply and carriage and erection of f bracket for 11 kv , supply and carriage and erection of eye bolts for service cable , supply and carriage and erection of clamps for transformer 75 into 6 mm , supply and carriage and erection of chemical earthing complete
Tender For corrigendum : supply of carriage and erection of pcc pole 11 meter , carriage and erection of pcc pole 8 and half meter , carriage and erection of 11 kv v-type steel cross arm , carriage and erection of 11kv pin insulator polymeric type , carriage and erection of 11kv pin insulator , carriage and erection of 11 kv gi pin with nut and bolt , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of 11 kv disc insulator , carriage and erection of 11 kv disc insulator fitting , carriage and erection of 11 kv xlpe cable 3 into 120 sqmm , carriage and erection of 11 kv xlpe cable 3 into 185 sqmm , carriage and erection of 11 kv jointing kit 3 into 120 sqmm , carriage and erection of 11 kv jointing kit 3 into 185 sqmm outdoor , supply and carriage and erection cross arm holding clamp v type with nut and bolt , supply and carriage and erection 11 kv f bracket , supply and carriage and erection stone pad , supply and carriage and erection t off channel , supply and carriage and erection t off channel clamp , supply and carriage and erection concreting of pole , supply and carriage and erection danger board with clamp and nut bolt , supply and carriage and erection number plat with clamp
Tender For supply of excavation, levelling and dressing of earth , fixing of all accessories and materials of single rail pole , erection of 11 kv isolator set , fabrication and commissioning of 11 kv isolator set , earthing of poles and transformer , construction of new transformer plinth , supply and fixing of stay wire and stay rod set , end termination of cable jointing , fabrication and erection of guarding wire , laying of xlpe power cable , supply and fixing of g.i. pipe , laying ,drawing sagging jumpering testing and commissioning of line , supply of ms channel , supply of 11 kv disc insulator , supply of 11 kv pin insulator , supply of 3 pole, 11 kv 400 amp isolator set , supply of structure for above set , supply of structure for pin and post insulator set , supply of pg clamps , supply of earthing rod , supply of end termination jionting , supply of 11 kv fuse set , supply of earth wire and gaurding wire , supply of gaurding channel , supply of f bracket for 33 kv , supply of 33kv v type cross arm , supply of 33 kv pin insulator , supply of 33kv disc fitting , supply of acsr dog conductor of 32 amp mcb , supply of danger board , supply of number plate , supply of barbed wire g.i. , supply of al. binding wire 6 swg , supply of stone pad , supply of belting angle
Tender For rate contract for supply of electric material(ht/lt) t&p/equipments/hardware items etc.for std udhampur -balance items. note :the bidders are advised to quote the reasonable rates for supply of all the items mentioned in boq. any rate quoted as zero shall be assumed that the firm is unwilling to supply the particular item and next lowest rate shall be considered as l1 for that particular item. - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, 11 kv single-core xlpe armoured cable 630 mm2, 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), 33 kv cable termination kits heat shrinkable 300 sqmm -3 core, 33 kv cable termination kits heat shrinkable 240 sqmm -3 core, 33 kv cable termination kits heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a)cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, 11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, 11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable, a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & battery bank , maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, 32 v battery charger automatic (float & boost) compatible for vrla batteries, 3 phase, 415 v ac , 50 hz ,4 wire 36 v , 30-40 a, with 4 outgoing feeders and with all protections, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification , 33 kv post insulator 24 mm, 11 kv guy insulator 90 x 65, 33 kv hardware fittings, 33 kv tension fittings for acsr dog conductor, t & c 3 u-bolts type (approx. 2.8 kg) al wt 400 gm, 33 kv suspension fittings for acsr dog conductor -( wt 1.8 kg), spares for 11 kv vcb panels, a) male / female contacts mei make, b) 11 kv pt fuse, c) 11 kv vcb bottle assembly bracket, d) shower contact mei make, e) shower contact crompton greaves make, spring charging dc motor for 11 kv vcb panel( make delco), tripping coil suitable for vcb panels (operating voltage 30-36 volt dc) with plunger, ampere meter 96mm x 96 mm for 11 kv vcb panel (digital), voltmeter 96mm x 96 mm for 11 kv vcb panel (digital), indicator lamp for vcb panel voltage 50-250 v ac/dc., tnc switch for 11 kv/ 33kv vcb panels, space heaters with thermostat for 11 kv vcb panels, 11 kv vacuum interupter bottle with makes, a) g.e., b) crompton greaves, c) allind, d) alstrom, e) bhel /a.b.b, master trip relay ashida (make) 18-52 (v), 11 kv cts resin cast of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv vcb panels(indoor/outdoor), i) 800/400/
Tender For supply of supply of stone pad , supply of ms top channel , supply of ms dropper channel , supply of ms t off channel , supply of lt clamp , supply of danger board , supply of prc connector , supply of i hook , supply of dead and clamp , supply of suspension clamp , supply of ms angle , supply of barbed wire , supply of f clamp , supply of number plate , supply of holding clamp , supply of double pole clamp , supply of e bracket , supply of henley type lailless unit , supply of lt pvc cable , supply of distribution box clamp , supply of clamp with nut and bolts , supply of allunimum lug 25 kva tf , supply of allunimum lug 63 kva tf , supply of allunimum lug 100 kva tf , supply of allunimum lug 250 kva tf , supply of allunimum lug 400 kva tf , safe carriage of pcc 8.5 m pole , safe carriage of st pole 9 m pole , safe carriage of st pole 11 m pole , safe carriage of 25 kva tf , safe carriage of 63 kva tf , safe carriage of 100 kva tf , safe carriage of 250 kva tf , safe carriage of 11 kv pin insulator , safe carriage of 11 kv disc insulator , safe carriage of 11 kv disc fitting , safe carriage of 11 kv fuse set , safe carriage of earthing , safe carriage of lt ab cable , safe carriage of lt xlpe cable , safe carriage of acsr weseal conductor , safe carriage of lt pvc armoud cabler , safe carriage of distribution box , safe carriage of stay set complete , erection of pcc pole 8.5 m single support , erection of st pole 11 m single support , erection of st pole 9 m single support , erection of pcc pole 8.5 m double pole , erection of st pole 11 m double pole , laying sagging of weseal conductor , laying sagging of lt ab cable , laying sagging of lt xlpe cable , laying sagging of lt pvc armoud cable , laying sagging of lt pvc cable , erection of plinth 250 kvatf , providing and installation of fancing , erection of pipe earthing , mounting of 25 kva tf , mounting of 63 kva tf , mounting of 100 kva tf , mounting of 250 kva tf , erection and grouting of stay , erection of stone pad , fixing of barbed wire , fxing of danger board , fxing of number plate , erection of earthing complete , erection of 3 phase distribution box , erection of dead end clamp , erection of prc connector , erection of 11 kv fuse set , erection and installation of lailless unit , received back material of 10 and 16 kva tf , received back material of 100 kva tf , received back material of lt ab cable
Tender For supply of porcelain bracket insulator (ri- 6030-1) (1050 mm cd) as per rdso specification no. ti/spc/ohe/ins/0071 (apr%u20192022) or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr
Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to jsv by prov. 11/0.4 kv, 25 kva dtr at bohal khalsa a/w 11 kv ht line in electrical section bharoli under esd hpsebl no-i jawalamukhi ed jawalamukhi - supply part of 11 kv ht line with aaac 7/3.81 (0.692 km), steel tubular poles 10 mtr. long, steel tubular poles 9 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), safety & maintenance equipment for line maintenance, ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr
Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to improvement and augmentation of lis bharoli phase-ii 1 no. tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl no-i jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.080 km), steel tubular poles 10 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), x-arm ci 100x50x6 mm, length 2800 mm x 2 nos for incommer line, x-arm ci 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch, go switch handle supporting ci 75x40x5 mm, length 460 mm, go ab switch unit (11kv, 400a, 25 ka) tripple pole o/d type, do fuse unit, cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), forntech inverter with 2 battries (ups), ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, universal optical cable (for mri), aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr
Tender For supply of composite bracket insulator (very heavy polluted) with cd of 1600 mm spec: ti/spc/ohe/inscom/1072 or latest , str: ti/str/006, rev-05 or latest (packaging of material as per rdso guideline ) [warranty period: 30 months after the date of delivery] [ warranty period: 30 months after the date of delivery ] ]