Latest insulation item Tenders | Government insulation item Tenders

State Government

CTN :41302477

27 Aug, 2025 4.99 Lacs

Korba - Chhattisgarh

Tender For procurement of electrical consumable nature materials for chp-int (1x500mw/4x210mw) & 3rd stream of chp ext, htps, korba west. - soldering flux for bronze in kg, soldering wire (60/40) 20 swg in kg, push button red color with adaptor spring return 22.5mm cut out size at panel with contact element ino-inc suitable for supply of 220vac/dc, push button green color with adaptor spring return 22.5mm cut out size at panel with contact element ino+1nc suitable for supply of 220vac/dc, auxiliary contact block-2no, type-3sb5400-0e, ui 690v ac, ac12, 10a, ac15 6a/230v, is 13947-5-1, iec 60947, auxiliary contact block-2nc, type-3sb5400-0f, ui 690v ac, ac12, 10a, ac15 6a/230v, is 13947-5-1, iec 60947, auxiliary contact block-inc+ino, type-3585400-0a, ui 690v ac, ac12, 10a, ac15 6a/230v, is 13947-5-1, iec 60947-5-1, electronic component cleaner co2, fast drying fully plastic safe, non clorinated, evaporattion rate 8.1, di-electric strength 26kv, one pack consist 500ml , araldite 36 gram pack, aa/aaa size cell 1.5 volts for multimeter, (aa size: 54 nos, and aaa size: 40 nos., cell alkaline 9 volt, rated voltage: 9v, leak proof type, suitable for various measuring instruments, local control panel lock with set of key, material stainless steel, housing must be rust resistance., fevitite (80+80 gm), is 12994 , roll of 19 mm wide, 20-meter-long fr pvc insulated electrical insulation tape, as per is 7809 part 3/sec-1 with the best available fr grade pvc film and unique proprietary of rubber based adhesive, incorporating imported resin, carries isi mark and tested/approved by erda (electrical research and development association). for use in electrical wiring, jointing kits, automotive cable harness and, industrial application, with following features: 1. fr tape with high stability & excellent aging properties., 2. non-migratory adhesive- not transferred from one face to another, 3. resistant to acids, alkalis, oil & gasoline, 4. moister, corrosion and weather resistant, 5. withstands up to 6500 v ac & provides long lasting insulation, thus saving short circuits, 6. high adhesion strength, soft, stretchy, easily unwinding, 7. excellent mechanical support at high temperatures (up to 900c), (black-75 nos., blue-75 nos., red-75nos., yellow-75 nos.), specific gravity hydrometers range 1100-1300 spg 0

corporations/Associations/Others

CTN :41312170

08 Aug, 2025 1.83 Lacs

Kolkata - West Bengal

Tender For replacement of damaged valve accessories by newly supplied items for 18 inch dia delivery valve of pump unit no. 5 at mullick ghat pumping station - dismantling of electrical power connection and control connection for the actuator of valve with proper marking and tapeing the connection ends with proper insulation. also, dismantling the actuator from the valve spindle before taking up the work, de - watering of manifold water to avoid any leakage of water during opening of upper hubs s.v gate, arrangement for loosing nut & bolt of the upper hub of s.v & dismentling the same, dismantling, lifting of upper hub of the s.v from the valve top by chain pully arrangement, lifting, dismantling s.v gate with arrangement of flange fixing to stop leakage of water, cleaning of upper hub of sv including sv gate slot., supply & delivery of one gm spindle matching with the existing box nut made of gm for 18 inch dia sluice gate valve of 0.625mgh pump. the spindle to be manufactured by proper machining turning thread cutting, polishing etc., supply & delivery of one gm box nut matching with the existing spindle for 18 inch dia sluice gate valve of 0.625mgh pump. the box nut to be manufactured by proper machining turning thread cutting, polishing etc., manufacturing, supply & delivery of one c.i. gate fitted with g.m. rings (having cu-85%, zn-4 to 6%, pb-4 to 6%, sn-4 to 6%) with set screw etc. (as per sample supplied departmentally) but without spindle & nut for 18" dia. sluice valve, to & fro transportation of c.i. gate and allied accessories from pump house work site to contractors workshop and vice versa including loading and unloading with proper care as per direction of e.i.c. (upto 10 k.m.), fitting fixing of s.v gate with spindle, fitting fixing of upper hub of s.v after necessary cleaning, new nut & bolts washer 4"x1"dia, reconnection (same and reverse as dismantling) electrical power & control connection for the actuator of valve & also refitted the actuator on the valve spindle, supplying, fitting & fixing of cast iron pedestal stool of suitable size, conforming of i.s. 210 of latest revision and as per approved drawing & direction of engineer in charge. the cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, anchor bolt of required size, hire charges of machineries like lathe/ shaping machine, grinding machine, drilling machine, tools & tackles etc. including carriage loading & unloading.

CTN :41323698

05 Sep, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of dry type and air cooled 200 va, 750/415 volt ac control transformer h cla ss insulation, 6 kv duly fitted with approved makes 04 amps/1.2kv fuse link with fuse ba se for primary and 02 amps /500 volt fuse link with base for secondary with approved make as per rdso specification no rdso/pe/spec/ac/0203-2020 rev-0 or latest for sbc of hog ac coaches & lhb power car. approved make:- make bhasin packard, trolex, trinitron, nacei, ramyaa, kontact consortium , ask powertec, abrol engg company. or any other ap proved make having rdso approval. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40135763

04 Aug, 2025 NA

Raigarh - Chhattisgarh

Tender For bid to ras bid to ras corrigendum : supply of filter , supply- ac and ventilation system- air intake louver , supply- ac and ventilation system- gravity damper , supply- ac and ventilation system- axial flow supply fans- 5500 cmh , supply- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , spares- ac and ventilation system -v-belt for ahu blower of each type , spares- ac and ventilation system -ahu blower bearings of each type , spares- ac and ventilation system -blower motor bearing for ahu , spares- ac and ventilation system -pre filter for ahu , spares- ac and ventilation system -fine filter for ahu , spares- ac and ventilation system -relative humidity sensors , spares- ac and ventilation system - geyserstat , spares-ac and ventilation system- local humidity temperature indicators , etc- ac and ventilation system- air cooled dx type condensing unit- minimum 33 tr actual capacity , etc- ac and ventilation system- air handling unit- ahu , etc- ac and ventilation system- fresh air fan assembly , etc- ac and ventilation system- split ac unit - 2 tr , etc- ac and ventilation system- strip heaters , etc- ac and ventilation system- pan humidifier , etc- ac and ventilation system- copper refrigerant piping- suction line , etc- ac and ventilation system- copper refrigerant piping-liquid line , etc- ac and ventilation system- refrigerant gas , etc- ac and ventilation system- gss duct sheet-24 g- air conditioning system , etc- ac and ventilation system- gss duct sheet-22 g- air conditioning system , etc- ac and ventilation system- gss duct sheet- 20 g- air conditioning system , etc- ac and ventilation system-gss duct sheet- 18 g- air conditioning system , etc- ac and ventilation system-non return damper , etc- ac and ventilation system-volume control damper , etc- ac and ventilation system- fire damper , etc- ac and ventilation system- motorised actuator for fire damper , etc- ac and ventilation system- grills diffusers , etc- ac and ventilation system- accoustic insulation , etc- ac and ventilation system- thermal insulation , etc- ac and ventilation system- dp switch , etc- ac and ventilation system- air flow switch , etc- ac and ventilation system- temperature cum rh sensor , etc- ac and ventilation system- fine filter , etc- ac and ventilation system- air intake louver , etc- ac and ventilation system-gravity damper , etc- ac and ventilation system- axial flow etc fans- 5500 cmh , etc- ac and ventilation system- axial flow exhaust fans with flp motor -7500 cmh , etc- ac and ventilation system-cable laying and termination alonwith lugs glands and any other accessories

CTN :41272377

08 Aug, 2025 22

Dakshina Kannada - Karnataka

Tender For supply, installation and maintenance of street light equipment to perabe gram panchayath of kadaba taluk and dakshina kannada district. - st-eqp-22-line fault reaping charge, st-eqp-21-switch control box repairing charge, st-eqp-20-high mast repairing charge, st-eqp-19-new streetlight fitting charge, st-eqp-18-streetlight repairing charge, st-eqp-17-clamp for streetlight, st-eqp-16-streetlight bend pipe, st-eqp-15-40w led streetlight set, st-eqp-14-34w led streetlight set, st-eqp-13-18w led streetlight set, st-eqp-12-led streetlight set - direct lamp, st-eqp-11-100w led floodlight, st-eqp-10-50w led floodlight, st-eqp-09-32amps dp switch, st-eqp-08-16amps mcb, st-eqp-07-insulation tape, st-eqp-06-lamp holder, st-eqp-05-gang box, st-eqp-04-5amps switch, st-eqp-03-4mm aluminium wire, st-eqp-02-led lamp 20w -driver based, st-eqp-01 - led lamp 18w -driver based

CTN :41257463

13 Aug, 2025 NA

Mettur - Tamil Nadu

Tender For mtps-i â tm â unit-iv â removal and re-insulation of hp / ip control valve area, spindle leak off lines & gland steam pipes of lp front & rear in main turbine during annual maintenance work 2025-26.

CTN :39481967

01 Sep, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo

corporations/Associations/Others

CTN :41262719

13 Aug, 2025 NA

Mettur - Tamil Nadu

Tender For mtps i tm unit iv removal and re insulation of hp ip control valve area spindle leak off lines gland steam pipes of lp front rear in main turbine during annual maintenance work 2025 26

CTN :41259094

09 Aug, 2025 NA

Ranchi - Jharkhand

Tender For supply of face recognition biometeric , finger reader biometeric , em locks , brackets , exit switch , door closer , door repairing , pvc box exit switch , access control software with perpetual licence , biometric configuration , biometric insulation , smps power supply , rj 45 connectors , computer i5 13 gen 8 512 20inch , pvc box for biometric accesses , cat6 cable , networking switch 04 port , pvc conduct pipe , 9u rack , sine wave inverter 1550va , 220ah battery , 01 kva ups , 2 core power cable , power socket , power switch , insulation tape , flexible pipe , sliding door motor , sliding door sensor , sliding door insulation , sliding door configuration with biometric , saddle packet , screw packet , sheet work , wire farm partition 8ft by 160 ft , wire garden work 22ft by 8ft , 16 zone metal detector , metal detector insulation , wiring

Central Government And Public Sector

CTN :41231404

18 Aug, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of ring type lug thimble 1.5 sqmm , ring type lug thimble 2.5 sqmm , ring type lug thimble 6 sqmm. , ring type lug thimble 10 sqmm. , ring type lug thimble 16 sqmm. , ring type lug thimble 25 sqmm. , ring type lug thimble 70 sqmm. , ring type lug thimble 95 sqmm. , ring type lug thimble 120 sqmm. , ring type lug thimble 150 sqmm. , ring type lug thimble 185 sqmm. , ring type lug thimble 240 sqmm. , 1.5mm pin type lug , 4.0mm pin type lug , 2.5mm pin type lug , 1.5mm fork type lug , 2.5mm fork type lug , combined switch socket 16a with box , electrical socket 16a, 6 pin , electrical plug top 6a, 3pin , electrical extension cord 2 socket 16a , electrical extension cord 4 socket 16a , soldering wire , led batten for panel lighting , soldering iron , torch light , nylon cable tie length 100mm , nylon cable tie length 250mm , nylon cable tie length 400mm , led driver 40w , 3c, 1.5sqmm cu unarmoured control cable , 1c,6sqmm, pvc inusulated cable , 1c, 10 sqmm, pvc insulated cable cu , 1c, 0.75 mm2, pvc insulated cable , 1c, 4 mm2 pvc insulated cable , 1c, 2.5 mm2 pvc insulated cable , 1c, 1.5mm2 pvc insulated cable , 2c, 1.5mm2 pvc insulated cable , 2c, 2.5mm2 pvc insulated cable , 2c, 4mm2, pvc insulated cable , 3c, 2.5mm2, pvc insulated cable , 3c, 4mm2, pvc insulated cable , 4c, 4mm2 pvc insulated cable , 8c, 1.5mm2 pvc insulated cu cable , 16c, 2.5 mm2 pvc insulated cable , allen key set taparia , pvc insulation tape , helmet mounted led light , non contact voltage detector upto 420kv , laser distance meter , safety belt harness , hydrometer , cut resistance gloves , plug and socket 20amp with mcb , pvc sleeve ) /bid number : gem/2025/b/6495036 * /dated: 28-07-2025 & & / bid document 1 / 34

Insulation Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector