Latest insulation panel Tenders | Government insulation panel Tenders

State Government

CTN :45238260

15 Jun, 2026 2.21 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage and erection of pcc pole 11 meter , carriage and erection of pcc pole 8 and half meter , carriage and erection of 11 kv v-type steel cross arm , carriage and erection of 11kv pin insulator polymeric type , carriage and erection of 11kv pin insulator , carriage and erection of 11 kv gi pin with nut and bolt , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of 11 kv disc insulator , carriage and erection of 11 kv disc insulator fitting , carriage and erection of 11 kv xlpe cable 3 into 120 sqmm , carriage and erection of 11 kv xlpe cable 3 into 185 sqmm , carriage and erection of 11 kv jointing kit 3 into 120 sqmm , carriage and erection of 11 kv jointing kit 3 into 185 sqmm outdoor , supply and carriage and erection cross arm holding clamp v type with nut and bolt , supply and carriage and erection 11 kv f bracket , supply and carriage and erection stone pad , supply and carriage and erection t off channel , supply and carriage and erection t off channel clamp , supply and carriage and erection concreting of pole , supply and carriage and erection danger board with clamp and nut bolt , supply and carriage and erection number plat with clamp

State Government

CTN :45261962

15 Jun, 2026 38.95 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage and erection of 11kv by 400v transformer 250 kva , carriage and erection of 11kv by 400v transformer 63 kva , carriage and erection of 11kv by 400v transformer 25 kva , carriage and erection of transformer 11kv by 2 and half kv 16 kva single phase , carriage and erection of pcc pole 8 and half meter , carriage and erection of pcc pole 11 meter , carriage and erection of 11 kv v type steel cross arm , carriage and erection of 11 kv polymeric disc insulator t and c type 45 kn , carriage and erection of 11 kv disc fitting t and c type 45 kn , carriage and erection of 11 kv pin insulator polymeric , carriage and erection of 11 kv gi pin with nut bolt , carriage and erection of 11 kv tpmo with polymer insulator , carriage and erection of lt xlpe cable a1 3 and half into 400 sq mm , carriage and erection of lt xlpe cable 3 and half into 70 by 35 sq mm , carriage and erection of lt abc 3 into 95 plus 1 into 70 plus 1 into 16 sqmm , carriage and erection of lt abc 3 into 120 plus 1 into 95 plus 1 into 16 sqmm , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of lt distribution box single phase , carriage and erection of lt distribution box three phase , carriage and erection of plinth , carriage and erection of fencing , carriage and erection of water level earthing , supply and carriage and erection of dp holding clamps for top channel tpmo and fuse set etc with bolts nuts , supply and carriage and erection of stone pad , supply and carriage and erection of concreting of pole , supply and carriage and erection of concreating of stay , supply and carriage and erection of danger board , supply and carriage and erection of number plate , supply and carriage and erection of barbed wire ) /bid number : gem/2026/b/7554223 * /dated: 20-05-2026 & & / bid document 1 / 36 including jumper , supply and carriage and erection of henley type tailless unit protection cubical pannel 500 amp 650 v for 250 kva dt , supply and carriage and erection of copper l piece 50 into 225 into 10 mm ls , supply and carriage and erection of copper l piece 62 into 225 into 12 mm ls , supply and carriage and erection of a1 leg long barrel of size ls , supply and carriage and erection of ms channel dropper 100 into 50 into 2028 mm for fuse set , supply and carriage and erection of ms top channel 125 into 65 into 2240mm , supply and carriage and erection of ms channel 125 into 65 into 1300mm t off , supply and carriage and erection of 11 kv fuse set , supply and carriage and erection of lt pvc cable 4 into 16 sq mm , supply and carriage and erection of lt pvc cable 3 and half into 150 by 35 sq mm , supply and carriage and erection of lt fuse set 25 kva , supply and carriage and erection of ms angle 75 into 75 into 6 into 2028 mm , supply and carriage and erection of suspention clamp , supply and carriage and erection of dead end clamp , supply and carriage and erection of eye hook , supply and carriage and erection of j hook , supply and carriage and erection of clamp for distribution box , supply and carriage and erection of piercing connector , supply and carriage and erection of clamps for lt toff with nut and bolt , supply and carriage and erection of pg clamp , supply and carriage and erection of 11 kv v type steel cross arm clamp with nut and bolt , supply and carriage and erection of cross arm holding clamp with nut and bolt , supply and carriage and erection of f bracket for 11 kv , supply and carriage and erection of eye bolts for service cable , supply and carriage and erection of clamps for transformer 75 into 6 mm , supply and carriage and erection of chemical earthing complete

State Government

CTN :45282107

13 Jun, 2026 63.00 Lacs

Patti - Punjab

Tender For corrigendum : supply of supply of 11 kv v type cross arm clamp , supply of 3 phase dis. box clamp with nut and bolts , supply of connecting cable , supply of l.t. fuse set protection box , supply of tinned copper fuse wire different size , supply of hdpe pipe , supply of stone pad , supply of holding clamp , supply of ms angle , supply of t-off chhanel , supply of top chhanel 125x65x240 , supply of dropper channel 100x50x2028 mm. , supply of danger board with clamp and nut and bolt , supply of g.i. patti clamp nut and bolts , supply of l.t. tail less unit , supply of copper l-pieace , supply of 11 kv f clamp , supply of suspension clamp , supply of dead end clamp , supply of eye i hook , supply of eye bolts for guarding , supply of j hook , supply of lt clamp , supply of pearcing connector , supply of alluminium lug 120 sq.mm. , supply of alluminium lug 240 sq.mm. , supply of alluminium lug 70 sq.mm. , supply of nut bolts and washers off size , supply of guarding angel , supply of guarding angel clamp , supply of m.s. angel iron 65x65x6 mm. , carriage of 9 m stp pole-sp- 55 galvanised , carriage of 11 m stp pole-sp- 55 galvanised , carriage of 8.5 m pcc pole , carriage of v type cross arm for 11 kv , carriage of 11 kv pin insulator with pin , carriage of disc insulator with fitting t and c 45 kn , carriage of 11 kv fuse set , carriage of 11 kv tpmo with polymer insulator , carriage of complete stay , carriage of distribution transformer 25 kva , carriage of distribution transformer 63 kva , carriage of distribution transformer 100 kva , carriage of distribution transformer 250 kva , carriage of acsr dog conductor , carriage of acsr weasel conductor , carriage of m s earthing rod 20 x2540 mm , carriage of lt al. xlpe cable size 1x240 sq.mm. , carriage of lt pvc cable 1x120 sq.mm. for dtr , carriage of lt pvc armoured cable size 3.5x70 or 35 sq.mm. , carriage of 11 ) /bid number : gem/2026/b/7551524 * /dated: 20-05-2026 & & / bid document 1 / 54 kv xlpe cable 3x185 sq.mm. , carriage of lt ab cable 3x120 sq.mm. , carriage of lt ab cable 3x50 sq.mm. , carriage of lt ab cable 3x95 sq.mm. , carriage of lt pvc armoured cable size 4x25 sq.mm. , carriage of 33 kv xlpe cable 3x300 sq.mm. , carriage of 33 kv indoor or outdoor jointing kit , carriage of 11 kv indoor or outdoor jointing kit , carriage of 33 kv straight through , carriage of 11 kv straight through size 3x185 sq.mm. , carriage of 11 kv vcb , carriage of g.i. wire 6 or 8 swg for guarding , carriage of three phase distribution box , erection of l.t. fuse set protection box , execution of chemical earthing with g.i. patti clamp nut and bolts , execution of pipe earthing with g.i. patti clamp nut and bolts , erection of l.t. tail less unit with all respective material , laying of acsr dog conductor , laying of acsr weasel conductor , laying of lt ab cable 3x120 sq.mm. , laying of lt ab cable 3x50 sq.mm. , laying of lt ab cable 3x95 sq.mm. , mounting of 3 phase distribution box , erection of double pole structure , erection of single pole structure , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of distribution transformers , plinth work , installation of transformers 11 or 0.4 kv t or f 25 kva , installation of transformers 11 or 0.4 kv t or f 63 kva , installation of transformers 11 or 0.4 kv t or f 100 kva , installation of transformers 11 or 0.4 kv t or f 250 kva , laying of cable 11 kv xlpe cable 3x185 sq.mm. , laying of cable 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit , installation of 11 kv indoor or outdoor jointing kit , installation of 33 kv straight through , installation of 11 kv straight through , installation of 11 kv vcb , dismentlling of jarjar g.i. wire and weasel conducter , received back of distribution transformer

CTN :45488935

30 Jun, 2026 41.38 Lacs

Murshidabad - West Bengal

Tender For procurement of esp spares for unit 4 esp overhauling during under ahp-em,stage ii during 2026,sgtpp - procurement of esp spares for unit 4 esp overhauling during under ahp em ,stage ii during 2026,sgtpp, ci bearing,collecting rapping ( plain bearing (ci) for crm & erm system,mat-is-210 gr-20 with 02 nos bolt, id-51 mm and 50 mm thickness. ), ci bearing for erm vertical shaft for esp dia-40mm. ( bush along with outer assembly. ), set ring for bush bearing for esp for 500mw esp, thrust bearing of em vertical rapping shaft ( mat-en-8. ), bottom bearing # of em rapping vertical shaft, major pin wheel big ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), minor pin wheel small ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), heating element for esp hopper for esp for 500mw esp. ( 440vac,for 500mw bhel esp, rating-500w. ), heating element for shaft insulator for esp for 500mw esp. ( for 500mw bhel esp, rating -1.0kw,type- breathing type tubular, 415v. ), heating element for support insulator for esp for 500mw esp., shaft insulator for esp for esp for 500mw esp. ( suitable for 500mw esp,make-m/s. bhel. ), support insulator, type-cylindrical for esp for 500mw esp ( od: 435 + 10 mm; id: 379 + 10 mm; height: 375 + 5 mm,for 500 mw bhel make esp. ), anvil for shock bar assembly #, inner arm for rapping hammer for esp moc-en 8 ( inner arm(ms) for rapping hammer suitable for m/s. bhel make esp ,2x500mw. ), emitting electrode for 500mw esp for esp model faa-9x45m-2x100150-2, hammer assembly,em rapping system # ( outer arm/hammer for eerm of 500 mw bhel make esp ), hammer assembly,col rapping system # ( outer arm/hammer for cerm of 500 mw bhel make esp ), pin insulator for disconnecting switch for esp c.no-71-999, crm horizontal shaft, dia-50mm for esp shaft 1-3 length -4250mmrnshaft 2-3 length -4650mmrnshaft 3-3 length -4790mm ( moc- en8, 400 mm pitch, as per drg. no: 2-79-725-04299 of 500mw bhel unit. section: 02,03 & 04. sleeve tube to be given seperate 04 nos. per set. ), shaft,end,d50xl940mm,en8 w/key&key slot for esp cerm shaft as per bhel drg no: 2-79-725-04299 ( moc: en8 ), shaft,eerm shaft,vertical,dia-40mm for esp 9900mm long,with sleeve,moc-en8 or080m40-bs970 or equivalent ( for 500 mw bhel make esp ), shaft,eerm shaft,horizontal,dia-50mm for esp 9270mm long,with sleeve and set rings,moc-en8 or080m40-bs970 or equivalent ( 03 parts(part-i with key,part-ii & part-iii) with 02 number set ring,02 number sleeve.bhel drawing no.-2-79-716-03812. ), gdrm d-50 shaft moc-en-8 with 19 holes for 500 mw esp serial no-faa-9x45m-2x100150-2 , 3 parts shaft with 19 holes.shaft with sleeve and set rings., big hammer for cerm shaft for 500 mw esp serial no-faa-9x45m-2x100150-2 drg no:2-79-725-04299

CTN :45507508

25 Jun, 2026 13.71 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of excavation, levelling and dressing of earth , fixing of all accessories and materials of single rail pole , erection of 11 kv isolator set , fabrication and commissioning of 11 kv isolator set , earthing of poles and transformer , construction of new transformer plinth , supply and fixing of stay wire and stay rod set , end termination of cable jointing , fabrication and erection of guarding wire , laying of xlpe power cable , supply and fixing of g.i. pipe , laying ,drawing sagging jumpering testing and commissioning of line , supply of ms channel , supply of 11 kv disc insulator , supply of 11 kv pin insulator , supply of 3 pole, 11 kv 400 amp isolator set , supply of structure for above set , supply of structure for pin and post insulator set , supply of pg clamps , supply of earthing rod , supply of end termination jionting , supply of 11 kv fuse set , supply of earth wire and gaurding wire , supply of gaurding channel , supply of f bracket for 33 kv , supply of 33kv v type cross arm , supply of 33 kv pin insulator , supply of 33kv disc fitting , supply of acsr dog conductor of 32 amp mcb , supply of danger board , supply of number plate , supply of barbed wire g.i. , supply of al. binding wire 6 swg , supply of stone pad , supply of belting angle

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

State Government

CTN :45467161

23 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of gi v-cross arm , gi f-top , d-clamp for st pole , gi channel 3 feet long , 11kv polymer insulator , 33kv polymer fitting only , 11kv polymer disc fitting only , nuts and bolts , bamboo ladder , suspension clamp, i hook, dead end complete set , ipc , acsr conductor 0.03 , mccb, 3-pole 600 amp , mccb, 3-pole 400 amp , mccb, 3-pole 250 amp , mccb, 3-pole 160 amp , mccb, 3-pole 100 amp

State Government

CTN :45237642

13 Jun, 2026 6.00 Lacs

Etah - Uttar Pradesh

Tender For corrigendum : supply of supply of hdpe pipe , supply of stone pad , supply of nut and bolts , supply of lt clamp , supply of lt shackle isolator , supply of i hook , supply of dead and clamp , supply of suspension clamp , supply of pg clamp , supply of number plate , supply of gi pipe , supply of prc connector , safe carriage of pcc 8.5 m pole , safe carriage of pcc 9 m pole , safe carriage of st pole 11 m pole , safe carriage of st pole 13 m pole , safe carriage of 33 kv jointing kit o d , safe carriage of 33 kv xlpe cable , safe carriage of lt ab cable , safe carriage of 3 ph. distribution box , safe carriage of 33 kv cross arm v type , safe carriage of 33 kv f clamp , safe carriage of 33 kv pin insulator , safe carriage of 33 kv pin with nut , safe carriage of earthing complete , erection of pcc pole 8.5 m , erection of pcc pole 9 m , erection of pcc pole 11 m , erection of pcc pole 13 m , dismentalling of lt ab cable , erection of lt ab cable , erection of 33 kv xlpe cable , erection of cable jointing kit o d , erection of stone pad , erection of number plate , erection of earthing complete , erection of distribution box with clamp , erection of gi pipe , erection of hdpe pipe , carriage of old material

State Government

CTN :45427476

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr

State Government

CTN :45427478

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to improvement of distribution system of various lwss in eletrical section silh under esd hpsebl majheen, ed jawalamukhi. - supply part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, cable 3.5 x 240 sq. mm, lt distribution panel box for 250 kva dtr, aluminium thimble 240 sq mm, capacitor bank 81 kvar for 250 kva dtr, danger plate, surge arrester, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, chemical earth, aaac 7/4.26 sq. mm, chain pully 3 ton, supply part of ct-pt unit, ct pt combined unit (pt:11 kv/110 v ct: 200/5 a), 3-ph, 4-wire tri vector meter (pt - ratio -/110 v, pvc multistrand 2.5 sq mm copper wire, 1 inch dia gi pipe for concealing, bend joint/elbow, st pole 9 mtr long with base plate, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 4 nos], x-arm: [channel iron (75x40x4.8 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 1 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos, ms angle iron (50x50x6 mm), length : 2800 mm x 4 nos, ms angle iron (50x50x6 mm), length : 460 mm x 2 nos, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, aluminium paint., red oxide, erection part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection charges & transportation charges complete in all respect of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection part of ct-pt unit, erection charges & transportation charges complete in all respect of ct-pt unit

Insulation Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors