Latest insulation tape scrap Tenders | Government insulation tape scrap Tenders

Central Government/Public Sector

CTN :42904317

29 Dec, 2025 3.62 Crore

Bangalore - Karnataka

Tender For corrigendum : replacement of em items against ber held with ge i rnd east bangalore - supply, installation, testing & commissioning of double skin horizontal air handling unit of fully capacity, complete with double skin insulated with cfc free foam (puf) panels of 25mm thick, 42 kg/cum density. sandwitched between 0.6 mm thick g.i. sheets. outer skin shall be pre coated g.i. sheet pre coated off white. ahu frame works shall be of pre cast vertical and horizontal extruded aluminium profile with three way corner frame sections. frame construction should bear the load of structure and load of the frame structure shall be uniformly distributed along the entire housing of the ahu. food grade self adhesive coated neoprene gasket to be provided between panels and structure of the ahu to ensure the entire housing is airtight., backward curved blower to be supplied along with motor (kruger/nicotra). filter will be of 10 mic as pre filter, 3 mic as fine filter. cfm as below with 60-80mm sp complete all as specified and directed., note: rate quoted to be deemed to include civil works for hvac like breaking and opening for entry and exit of supply ducts from ahu room, exhaust ducts into shafts for exiting copper pipes / drain pipes also. fire rated material of 25mm thick phenotherm to be used near civil closures for fire resistant properties., a) 13200 cfm, 60mm static ahu capacity 33 tr., 11 tr dx outdoor ac unit complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a minimum capacity.note: rate quoted to be deemed to erection of condenser unit platform (ms angle frame with 02 coats of red-oxide and 01 coat of enamel black paint) with ms works for duct support., supply, installation, testing & commisisioning of nominal capacity air-cooled dx floor mounted packaged ducted units complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a capacity of mimimum 22 tr ducted packaged ac unit with 8800cfm complete all as specified and directed., supply, installation, testing & commisisioning of nominal capacity air-cooled dx floor mounted packaged ducted units complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a capacity of mimimum 11 tr ducted packaged ac unit with 4400cfm complete all as specified and directed., supply, installation, testing & commisisioning of nominal capacity air-cooled dx floor mounted packaged ducted units complete with scroll compressors, copper tube aluminium finned air cooled condensers, propeller type condenser fans with eco friendly r410 refrigerant & powder coated outer metal body controlling a capacity of mimimum 8.5 tr ducted packaged ac unit with 3500cfm complete all as specified and directed., supply, installation, testing & commissioning of air cooled ducted split air conditioners of capacity 8.5 tr with r2 series: r 407c eco friendly refrigerant, nominal cooling capacity 1,02,000 btu/hr, nominal air flow 3400 cfm, microprocessor based with lcd display controller and hermetically sealed scroll type compressor, all necessary connections with suitable size of copper cables and initial gas charging, provision of necessary pcc platform / iron angle frame for outdoor unit complete all as specified and directed by engineer-in-charge., dismantling / taking down / transporting carefully old acs outdoor & indoor unit with all connected acessories and to be deposited in mes store complete all as specified and directed., dismantling / taking down / transporting carefully old unserviceable ducting items off any size and capacity with all connected accessories and to

Central Government And Public Sector

CTN :43048903

20 Dec, 2025 NA

Hubli - Karnataka

Tender For corrigendum : supply of dental instruments to kmcri hubli - endomotor card less (dentspl y), x-ray machine, apex locator (j morita), compressor % hp, dewaxing unit, acrylic lathe trimmer, chisels, autoclave (front loading) b class, uvcabinet, vita shade guide, extraction forceps, elevators kit, instrument cassette, glickman (p24g) perio elevator, pedo forceps, castroviejo scissors straight -, curve -, artery forceps straight-, curve -, tissue holder, needle holder, tweezers, surgical bur cardbide straight and round, moons probe, scissors suture cutting st /curved -, b p handle no.d3, periodontal curette gracey with cassette (hu - friedy), condenser (round), plastic knife, agates spatula, cement spatula, cement carrier, airotor diamond burs .., polishing brush and cups, dapen dish, bur block, dentulous impression trays upper 5 & lower 5 (rim lock), edentulous impression trays upper 5 & lower 5, hinge articulator, kidneytrays . . " . . . : . ., thick-glass slab, thin glass slab, cheek retractor, spirit lamp, blowtorch, wax knife, plaster spatula, straight probe, universal plier (manipal), wire cutter, alcohol torch, hot gloves (leather), airoter, straight handpiece, micromotar, teflon coated composite filling instruments, composite polishing kit, gd-16 probe, cavit cement ., miracle mix, cavity varnish, periodontal dressry coe pack (gc company) , -, -,, teeth whitening gel (colgate), calcium hydroxide light cure cement, foromacresol, calcium hydroxide cement, gic cement' - restorative type-9 (gc/3m), luting, composite kit & material, alginate impression material dust free,-soo grm (aromafine, gc), cold cure acrylic resin pink liquid kit (liquid 400. ml & powder, 400mg) (dpi), heat cure acrylic r'esin (high impact powder 4so.gm & liquid, 256ml) (dpi), light body impression material (catridge) 50 ml (gc/dentsply), medium body impression material 50 ml (dentsply), putty impression material (base 500gm & catalyst 500gm), (gc/dentsply), soft liner (kit) (gc), tray adhesive 10 ml (ivoclar/dentsply), zinc oxide eugenol impression paste (8 140mg & c 65 mg) (cave x, outline), light curing tray blanks (lndvido lux, voco), light curing base plates (profibase, voco), bite registraion paste (letbite, coltene), disposable glasses, topical apf fluoride gel, stylofoam trays, sterlzation pouches (oyo company) - small, rubber dam kit (hygiene) , fiber splints , flowable composites , matrix band for no.1 & 8 , matrix strips , suction tips (disposable) , mylar strips , dentin conditioner , k-files , (10-40) , (40-80) , h-files , rotary files (4%) , rotary files (6%) , rotary files (sx, s1, s2, f1, f2, f3) , guttapercha points – 4% (25, 30, 35, 40) , 6% (20, 25, 30, 35) , f1, f2, f3 , root canal seales cement (a-h plus dentsply) , paper points (dentsply)

CTN :42847474

19 Dec, 2025 NA

Chandigarh - Chandigarh

Tender For corrigendum : purchase of raw material to be supplied at various jails in state of punjab. - ply board of size 6 x3 (19mm), ply board of size 8 x4 (19mm), sunmica (brown) (plain) of size 8 x4 (1mm), ply of size 8 x4 (6 mm), adhesive fevicol sh, round pipe of size 1 x1 -16 g, square pipe of size 1 x1 -16 g, concentrate phenyl, plastic cane (double), welding rod 10 no., cotton yarn (open end) (pl grade) of size 14 s, cotton yarn (open end) (pl grade) of size 2/20 s, cotton yarn (open end) (pl grade) of size 6 s, cotton yarn (open end) (pl grade) of size 4/6 s, soap stone, pam fatty, rice fatty, sodium silicate, woollen acrylic 2/32 daffodil colour maroon, woollen acrylic 2/32 daffodil colour grey, fiber sheet of size 6 x 25

CTN :42599563

26 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : schedule vii (surgical dressings) - schedule vii (surgical dressings), bandage open woven 10x350 cms. as per schedule f-ii of drugs & cosmestics act,1940., bandage open woven 7.5 x 550 cms. as per schedule f-ii of drugs & cosmetics act,1940, plastic disposable drapes ready to use sterile without adhesive size 150 cms x 140cms : 100 gauge., plastic disposable drapes ready to use sterile without adhesive size 100 cms x 80cms : 100 gauge., bandages of p.o.p. ready to use. 15 cms x 2.7 meters., bandages for p.o.p. with starch as per schedule f(ii) of the drugs & cosmetics act,1940 10 cms x 4 metres, bandages for p.o.p. with starch as per schedule f(ii) of the drugs & cosmetics act,1940 15 cms x 4 metres, antimicrobial silver dressing. sustained release of silver for minimum 72 hours. effective against mrsa & vre size 10 x 10 cm/ 10 x 12 cm / 12 x 12 cm, antimicrobial silver dressing. sustained release of silver for minimum 72 hours . effective against mrsa & vre size 40 x 40 cm., tulle gras paraffin gauze dressing medicated. with chlorhexidine acetate 0.5% does not fray and leave cotton threads within the wound.soothin and protective of wound broad spectrum antiseptic effective against all gram positive and some gram negative bacteria.not inactivated by body fluids sterilie packaging.size 15 cm x 1 m, collagen sheets 10 cm x 10 cm +-1 cms, collagen sheets 15 cm x 25 cm +-2 cms, protective disk with chg is a hydrophilic polyurethane absorptive foam with 52.5 mg chlorhexidine gluconate (chg). 3/4" disk (1.9 cm) 1.5 mm center hole with radial slit, 2% chlorhexidine iv securement transparent dressing size : 10 cm x 12 cm gel pad size : 3 cm x 4 cm, tafetta silk tape size : 2 inches, tafetta silk tape size : 3 inches, alcohol free disinfection wipes containing quaternary ammonium compounds,for rapid disinfection of medical devices and other surfaces in medical areas 20x22cm. of pack of 100 wipes., adhesion barrier matrix 4 inch* 5 inch (10.0cm x 12.5cm), sterile porous collagen sheet sterile fish origin porous collagen dressing with nylon mesh backing, collagen layer is lyophilised, type i intact collagen of fish origin, collagen should be resorbable, size 8 in x 12 inch, sterile dry collagen sheets (fish origin ) 15x20cm, haemostatic matrix, size 8 ml, material: porcine gelatin, absorption time: 4-6 weeks, shelf life: 2 yearspack size: 6 pieces, storage requirementsstored dry at controlled room temperature 36-77 deg f (2-25 deg c)., sterile dry collagen sheets (fish origin ) 10x10cm, absorbent lint material 100% cotton, feature eco-friendlyusage: home, hospital, pressure garments (cotton) jacket without sleeves ( xl) 105-115 cm, pressure garments (cotton) jacket without sleeves ( large) 95-105cm, pressure garments (cotton) jacket without sleeves ( medium ) 85x 95 cm, pressure garments (cotton) jacket without sleeves ( small ) 75x 85 cm

CTN :40703094

15 Dec, 2025 NA

Hyderabad - Telangana

Tender For bid to ras corrigendum : supply of un-axial accelerometer , tri-axial accelerometer , shock accelerometer , low noise for un-axial accelerometer , low noise cables for tri-axial accelerometer , low noise tri-axial extension cables , cable for shock accelerometer , vibration isolator , extension connector , tri-axial strain sensors with invar material , tri-axial strain sensors with stainless steel material , biaxial strain sensors with stainless steel material , rtd temperature sensor , methyl methacrylate two- component adhesive , mild phosphoric -acid conditioner , ammonia-based conditioner neutralizer , strain gage adhesive kit , flux and rosin solvent kit , air-drying solvent -thinned acrylic , air-drying solvent -thinned xylene polyurethane , silicon conformal coating , protective coating , solvent degreaser , high temperature cement kit , fiber glass adhesive tape 1 h -class , gauge sponge , pressure sensing element pressure range-70bar , pressure sensing element pressure range-170bar

Central Government / Public Sector

CTN :42938220

17 Dec, 2025 NA

Mathura - Uttar Pradesh

Tender For corrigendum : supply of wire, cu,1x2. 5sq. mm,pvc ins,yelow,unshtd , flexible wire, cu, 1 x 2. 5 sq. mm, red , wire,cu,1x1. 5sq. mm,pvc ins,grey,unshtd , flexible wire, cu,1 x 1. 5 sq. mm, red , wire, cu,1x1. 5sq. mm,pvc ins,yelow,unshtd , paper,emery,coarse , paper,emery,fine , wd-40 spray , markin cloth , m-seal,gen purpose,1 kg pack , aaa size alkaline battery , battery 1. 5v,size aa , battery,9v , electrical insulationtape pvc,self adhes , aluminium adhesive tape , connector,rj45 , lm-ir300b ink ribbon black 50m per roll , pvc printer sleeve 4. 2 mm , ferrule,pvc printer sleeve 3. 5 mm , lug,cu,insulated,tubular type,4sq mm , lug,cu,insulated,tubular type,6sq mm , lug,cu,insulated,tubular type,2. 5sq mm , lug,cu,insulated,tubular type,1. 5sq mm , lug,cu,insulated,tubular type,1sq mm , copper, insulated fork type lug,4sqmm , cu fork type insulated, lug 1. 5sqmm , lug,cu,insulated,tubular type,0. 75sq mm , cable tie, nylon material 150mm , cable tie,nylon material, 200mm , cable tie, nylon material, 100 mm , o-ring kit,viton,as 004-050,thk1. 78mm , o-ring kit,viton,as 102-118,thk-2. 62mm , oring kit, viton, metric size , o-ring kit, nitrile, metric size ) /bid number: gem/2025/b/6935792 * /dated: 26-11-2025 & & / bid document1 / 32

Central Government/Public Sector

CTN :43087849

22 Jan, 2026 NA

Perambur - Tamil Nadu

Tender For corrigendum : supply of 1) permeable non woven paper wored non allergic adhesive plaster size:2m x 50mm, 2) permeable non woven synthetic adhesive tape. non allergic adhesive plaster size:75 width x 3metres, 3) self adhesive plastic film for use over the operative field incise drape size:15cmx8cm, 4) self adhesive plastic film (operative field incise drape size:8.5cm x 12cm), 5) self adhesive dressing material (operative 25 cm x 10 cm primapore) & 6) hypo allergic permeable plastic surgical adhesive tape size: 25mm x 9.1m

CTN :43125476

31 Dec, 2025 13.86 Lacs

East Sikkim - Sikkim

Tender For supply of silicon, size fr 8 , foleys balloon catherer silicon size fr 10 , strip indicators for sterilisation control for testing sterility of drums , vaccum blood collection tubes with needles and sterile tube with gel-5ml material-plastic oblique glass , vaccum blood collection tubes with needles and additives sodium fluoride oblique sodium fluoride plus k3edta in tubes of vol 02 ml , adhesive plaster zinc oxide 2. 5 cm x 1 mtr , adhesive plaster zinc oxide 7. 5 cm x 5 mtr , bandage triangular , bandage t shaped , compression elastic bandage for dvt small , compression elastic bandage for dvt medium , compression elastic bandage for dvt large , dressing, first aid, unmedicated sterile pack , dressing wound care 10cm x 10cm box of 5 , dressing silicon gel sheet 5 inch x4. 5 inch , dressing sterile 4 inch x 4 inch box of 5 , dressing sterile 8 inch x 8 inch box of 3 , gauze absorbent , folded ,1 cm x 100 metres , pad abdominal swab 25 x 25 cm with tape 30 cm , suspensory scrotal , expanded ptfe non absorbable monofilament suture cv2 rb double needle size 26 , haemostatic clips titanium haemostatic clips extra large , haemostatic clips titanium haemostatic clips large , haemostatic clips titanium haemostatic clips medium , mesh prosthesis for hernia-small polypropylene mesh size 6x11 cms. composite light wt mesh of polypropylene and polygalactin 910 oblique polygycolic acid, size 6x11 cms , monofilament polyglyconate synthetic absorbable suture size 1, 90-95 cm, 1 oblique 2 circle taper cutting 45-50 mm , monofilament polyglyconate synthetic absorbable suture size 1 oblique 0, 70-75 cm, 1 oblique 2 circle taper cutting 20-30 mm , monofilament polyglyconate synthetic absorbable suture size 2 oblique 0, 70-75 cm 1 oblique 2 circle taper cutting 20-30 mm , monofilament polyglyconate synthetic absorbable suture size 3 oblique 0, 70-75 cm, 1 oblique 2 circle taper cutting 20-30 mm , polyamide monofilament size 1, 100 cm, 1 oblique 2 circle rb 40 mm , polyamide monofilament size 1 oblique 0,100 cm 1 oblique 2 circle rb 40 mm , polyamide monofilament size 2 oblique 0, 70-80 cm 3 oblique 8 circle reserve cutting 40-45 mm , polydioxanone size 3 oblique 0, 70-75 cm,1 oblique 2 circle rb, 20-25 mm , polydioxanone size 5 oblique 0 70-75 cm 3 oblique 8 circle rb double needle 10-15 mm , polydioxanone size 5 oblique 0, 70-75 cm, 3 oblique 8 circle rb double needle 12-15 mm , polyglicaprone size 1 oblique 0, 70-75 cm 1 oblique 2 circle rb 30-0 mm , polyglicaprone size 2 oblique 0 ,70-75 cm 1 oblique 2 circle round body 30 -40 mm , polyglicaprone size 4 oblique 0 70-75 cms 3 oblique 8 circle reverse cutting 15-20 mm , polyglicaprone size 4 oblique 0, 70-75 cm, 1 oblique 2 circle rb 20-25 mm , polyglicaprone size 5 oblique 0 40-45 cms,curved reverse cutting 15-20 mm , polypropylene blue monofilament 70-75 cm size 3 oblique 0, 3 oblique 8 circle reverse cutting 12 mm , polypropylene blue monofilament 70-75 cm size 4 oblique 0, 1 oblique 2 circle rb 25 mm double needle , polypropylene blue monofilament 70-75 cm, size 1 3 oblique 8 circle reverse cutting,12 mm , polypropylene blue monofilament 70-75 cm, size 1 oblique 0 3 oblique 8 circle reverse cutting,12 mm , polypropylene blue monofilament 70-75 cm, size 4 oblique 0, 1 oblique 2 circle rb 13 mm double needle , polypropylene blue monofilament 70-75 cm, size 4 oblique 0, 3 oblique 8 circle rb 13-25 mm double needle , polypropylene blue monofilament 70-75 cm, size 5 oblique 0, 3 oblique 8 circle rb,12-18 mm double needle , polypropylene blue monofilament 70-75 cm, size 5 oblique 0, 3 oblique 8 circle reverse cutting,12-13 mm double //bid details2 / 81needle , polypropylene blue monofilament 70-75 cm, size 6 oblique 0, 3 oblique 8 circle rb,12-18 mm double needle , polypropylene blue monofilament 70-75 cm, size 6 oblique 0, 3 oblique 8 circle reverse cutting, 12-13 mm double needle , polypropylene blue monofilament 70-75 cms size 2 oblique 0, 3 oblique 8 circle reverse cutting 12 mm , polypropyle

Central Government/Public Sector

CTN :43127526

31 Dec, 2025 NA

Katipala - Karnataka

Tender For custom bid for services - tender for annual rate contract for specialized works at mrpl as per boq and scope of work (bidder has to quote lumpsum price higher or lower than the sor value including gst); 1 1057794 providing and laying of 6 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 6mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm+wr+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 2 1057795 providing and laying of 4 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 4mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 3 1057796 providing and laying of 2 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 2mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 4 1057797 providing and laying of 6 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 5 1057798 providing and laying of 4 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 6 1057799 providing and laying of 2 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 7 1057810 supply and laying of 2 mm frp with general purpose glass and resin including primer as per tender and instructions of eic. 8 1057811 joints repair of existing ppg lining with thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 9 1016067 supply of thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 10 1016068 laying of thermoplastic chemical resistant ppg for 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining including removal of the exisiting lining,joining/welding etc all complete as per enclosed specification and directed by eic. 11 1028194 supply of 5 mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090). and as directed by eic 12 1028195 laying of 5mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090) 13 1057812 providing and applying of epoxy putty filling in irregularitie

CTN :43065620

15 Dec, 2025 30.00 Lacs

Bikaner - Rajasthan

Tender For various types of furniture materials - table 3 x 6 1. size:3 feet (width) 6 feet (length) 2.5 feet (height) approximate.2. material:frame and legs made of seasoned teak wood (moisture content 10%).tabletop made of 18 25 mm thick isi-marked commercial board / plywood, of approved quality.all wooden parts shall be termite-proof and kiln-seasoned.3. top finish:top covered with 1 mm thick laminate (matte / glossy) of approved shade and brand.all edges sealed with 2 mm pvc edge banding or polished teak beading.surface to be smooth, scratch-resistant, and heat-resistant.4. drawers & box unit:three lockable drawers on one side, mounted on telescopic channels for smooth sliding.one storage box / cupboard with hinged door and locking arrangement on the other side.all drawers and box interiors finished with melamine or laminate.5. legs & frame:made from solid teak wood sections (minimum 2 2 ), joined with proper mortise and tenon joints.cross supports / bracing provided for additional rigidity and strength.6. hardware:branded locks, handles, channels, and hinges (e.g., godrej / hettich / ebco or equivalent).high-quality adhesive and screws used for assembly.7. polish / color:melamine / pu polish in natural teak, walnut, or as approved by the department.uniform finish without marks or uneven coating.8. quality requirements:table must be sturdy, termite-resistant, moisture-protected, and wobble-free.workmanship should be neat and conform to standard office furniture design.minimum load-bearing capacity: 75 kg distributed load on tabletop.9. warranty:minimum one-year warranty against manufacturing or structural defects., table 4 x 6 1. size:4 feet (width) 6 feet (length) 2.5 feet (height) approximately.2. material:frame & legs: made of first-class seasoned teak wood, moisture content not exceeding 10%.top: 25 mm thick isi-marked commercial board / plywood of approved brand and grade.drawer & box components: 18 mm commercial board with teak wood beading on exposed edges.all materials must be termite-proof, moisture-resistant, and well-seasoned.3. top finish:tabletop finished with 1 mm thick premium laminate (matte or glossy) of approved shade and brand (e.g., greenlam, century, merino).edges: 2 mm pvc edge banding or solid teak beading, finely polished.surface should be smooth, scratch-resistant, and heat-resistant.4. drawers and storage box:three lockable drawers on one side with telescopic channels for smooth movement.one storage box / cupboard with hinged door and individual lock on the same side.all drawers to have soft-closing mechanism and branded locks/handles (godrej / hettich / ebco or equivalent).inner surface of drawers and box to be laminated / melamine-coated for a clean finish.5. frame and support:legs of solid teak wood (2" 2" or heavier section) with cross bracing for strength.all joints properly mortised and tenoned, fixed with wood adhesive and screws for rigidity.table should be wobble-free and stable.6. polish / color:pu or melamine polish of natural teak / walnut / oak shade (as approved).finish to be uniform, smooth, and glossy.7. hardware & accessories:all fittings (locks, hinges, channels, handles) to be branded and rust-proof.cable hole with grommet on top for wiring management.8. quality & strength:structure must be durable, termite-resistant, and long-lasting.tabletop load-bearing capacity minimum 100 kg (uniform load).corners rounded for safety and aesthetics.9. warranty:minimum one-year comprehensive warranty against any manufacturing or structural defect., computer table1. size:approx. 1200 mm (l) 600 mm (w) 750 mm (h)(4 feet 2 feet 2.5 feet)2. material:top: 18 25 mm thick pre-laminated particle board / mdf board / plywood, isi-marked, of approved brand (e.g., century, greenply, action tesa).frame / legs: mild steel (ms) tubular frame (25 mm 25 mm 1.2 mm thick) with powder coating, or solid wood frame as specified.keyboard & cpu units: same material as tabletop (laminated board).3. c

Insulation Tape Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector