Latest insulator repair Tenders | Government insulator repair Tenders

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

CTN :45024597

11 May, 2026 NA

Pune - Maharashtra

Tender For supply of lv7 t 815 4x4 442 053 621 754 ring connector , lv7 t 815 4x4 442 954 180 034 border , lv7 t 815 hmv 442 075 911 704 tube rh , lv7 t 815 hmv 442 076 608 814 line fip to heater , lv7 t 815 hmv 442 954 163 994 sealing , lv7 t 815 hmv 130 050 952 854 spacer washer , lv7 t 815 hmv 130 075 720 854 yoke , lv7 t 815 hmv 442 028 160 194 case of steering bearing , lv7 t 815 hmv 130 078 742 034 front sheet rh , lv7 t 815 hmv 549 721 030 230 lock taper rh , lv7 t 815 hmv 549 721 030 130 lock taper lh , lv7 t 815 hmv 442 054 490 424 sleeve , lv7 t 815 hmv 442 054 331 974 intake manifold rear , lv7 t 815 hmv 130 029 310 114 strut eye , lv7 t 815 hmv 442 942 320 064 inner lining , lv7 t 815 hmv 548 211 559 100 clip 5 csn 02 27515 , lv7 t 815 hmv 130 050 710 294 seal ring metal130 050 710 294 , lv7 t 815 hmv 990 700 407 000 handle , lv7 t 815 hmv 442 021 661 984 steering lever , lv7 t 815 hmv 150 186 002 004 o ring , lv7 t 815 hmv 130 035 260 484 cover vehicular components , lv7 t 815 hmv 442 050 520 704 spring , lv7 t 815 hmv 442 076 835 834 line , lv7 t 815 hmv 442 051 510 414 nut , lv7 t 815 hmv 442 050 251 124 fuel supply lever pin , lv7 t 815 130 051 361 324 plug , lv7 t 815 130 076 857 724 union pipe 130 076 857 724 , lv7 t 815 130 054 391 354 rubber cap , lv7 t 815 2990 016127 exhaust piping , lv7 t 815 2510 008485 cabin support , lv7 t 815 130 051 240 094 washer , lv7 t 815 130 054 480 854 hose holder , lv7 t 815 273 112 451 134 gasket , lv7 t 815 130 050 960 664 oilthrow ring , lv7 t 815 130 987 960 154 stepladder442 987 960 154 , lv7 t 815 130 965 050 144 impurities trap , lv7 t 815 443 934 901 221 washer insulation , lv7 t 815 443 934 901 109 washer 53x13x1 mgn 190504 01109 , lv7 t 815 442 076 827 834 line , lv7 t 815 442 076 632 144 oil supply tube , lv7 t 815 443 960 523 018 fan , lv7 t 815 443 960 520 147 knob , lv7 t 815 442 960 311 464 cover holder , lv7 t 815 336 015 528 009 oil level gauge , lv7 t 815 315 130 045 960 spring8007 08 , lv7 t 815 442 050 680 104 disc spring , lv7 t 815 441 028 090 574 pipe line holder 10 , lv7 t 815 129 050 520 054 spring helical extension 129 050 520 054 , lv7 t 815 443 975 485 523 carrying pin54855 23 , lv7 t 815 442 070 190 284 air duct , lv7 t 815 442 079 090 014 contact , lv7 t 815 442 053 621 404 reduction coupling , lv7 t 815 442 053 950 104 screw insert , lv7 t 815 130 051 361 094 valve plug130 051 361 094 , lv7 t 815 129 928 300 034 handle cover , lv7 t 815 130 051 110 244 washer convex130 051 110 244 , lv7 t 815 hmv 324 914 310 237 ball iii 1 2 csn 02 3680 , lv7 t 815 hmv 442 029 012 844 paddle lever , lv7 t 815 442 075 063 894 tie rod , lv7 t 815 hmv 5935 408485 screw , lv7 t 815 hmv 442 050 810 764 spacer washer 01mm , lv7 t 815 hmv 442 076 608 934 filter to pump , lv7 t 815 hmv 112 931 032 252 needle roller 3x208 b2 zr1 pni 8502 , lv7 t 815 hmv 309 503 140 822 screw cap hexagon head 309 503 140 822 , lv7 t 815 hmv 309 110 549 000 screw m6x25 csn 02 110125 , lv7 t 815 hmv 442 028 512 894 tie rod , lv7 t 815 442 053 180 064 hose dia 5x8 720 mm , lv7 t 815 101 111 014 124 deck covering sealing coating , lv7 t 815 107 726 905 025 key 5h9x5x16 is2048 1983 , lv7 t 815 443 931 043 620 washer , lv7 t 815 5315 009855 split pin 32x18 is549 74 //bid details 2 / 57

CTN :44949845

07 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : procurement of mi spares for gt-5 - liner bearing # 1, p/n:35101010 , seal,air, p/n: 35101020 , seal,stationary oilbearing,p/n:35101030 , deflector,oil-brg#1,p/n:35101040 , seal,stationary,oilbearing,p/n:35101050 , bolt,12 point head,m33x90,p/n:35104017 , vanes,igv,ge drg.no.151d8782p001 , gear,steel,dr no.3-351-06-51003-01 g5004 , washer,spring,p/n:35106036 , bushing du,p/n:35106037 , bushing,p/n:35106038 , tubing spacer,p/n:35106056 , pin cylindrical headless,p/n:35106061 , washer,plain wide,p/n:35106069 , washer,thrust,p/n:35106071 , washer,dis spring,p/n:35106072 , retainer cross fire tube,p/n:35108001 , tube assy cross fire tube,p/n:0027 , gasket,1.5thxod190xid88,p/n:35108013 , gasket,1.5thx162odx60id,p/n:35108014 , 5001 u/r transpiece, p/n:943e0237g003 , strip pkg(br-inconel)3.2x3.2x10160 , strip pkg(br-inconel)3.2x3.2x8890 , bolt-shoulder,p/n:35115004 , lockplate, p/n:35115005 , bolt-shoulder,p/n:35115006 , seal-end,p/n:35115007 , locking plate,nut&bolt,p/n:35115008 , nut hexagon-m20,p/n:35115009 , gasket,spiral wound,16in,p/n:35116202 , bolt,hex.head,m16x50,p/n:35116204 , gasket,spiral wound,20in,p/n:35116205 , seal,stationary oil brg #2,p/n:35201030 , liner,bearing no.2,p.code:hy352011005001 , bearing,shim,p/n:35204001 , bearing,thrust,shim unloaded,p/n35204002 , bearing,thrust tilting pad(six),35204015 , pin,platform seal,p/n:35306091 , pin,shank seal,p/n:35306092 , lock,twist,p/n:35306093 , pin,seal,p/n:35306101 , lock,twist,p/n:35306102 , hydraulic cylinder, p no:gb9711452006 , filter hydraulic,p/n:35408019 , filter hydraulic,p/n:35409002 , expansion joint segment,p/n:35912389 , gasket,exp-jt,exh hood,p/n:35912391 , load coupling hardware,p/n: 36361001 , deflector, f.g.ref.no:9673c270-2 , deflector, f.g.ref.no:9673c420-2 , deflector in 2/2,p/n:10024 for gear box , deflector plate, p.no: 10026 , splined coupling atamising air , gasket(squre copper),drg no:318a9700p001 , baffle air,p/n:35904061 , baffle air,p/n:35904119 , cover insulation,p/n:35904158 , cover insulation,p/n:35904140 , spring seat,p/n:35417023 , spring p/n:35417028,bhel , magnetic pickup-hp,iii,185a1117p004 , spring, p/n :35417022 , valve seat, p/n :35417024 , stem valve, p/n :35417025 , ring packing,teflon for gcv/srv,35417030 , shroud set, 5001 i stg.p/n:500533 , shroud& seals stg ii .(honeycomb design) , full set of air cooled nozzles of gtg-4 , nozzle ii stage , bearing,thrust bearing#1,p/n:35204010 , bld kit tb rtr-stg.2 (cutter teeth) , clutch electric,p/n:35404001 , bearing kit for accessory gear box, , load gear box brgs for drv end,p/n:10081 , bearing set,main oil pump , igv relocation kit for bhel gt frame:5

CTN :44974379

04 May, 2026 20.00 Lacs

Medininagar - Jharkhand

Tender For meterial required for wtp - ferric alum /non ferric alum grade 4, bleaching ( aditya birla ) industrial grade (for wtp), lime ( hydrated lime ) industrial grade (for wtp), galansuta 8, 10, 12 & 16 , 20 mm, grease ( castrol /servo /nbc ), coupling tyre 15, 16 & 17 no., nut & bolt, washer, tyre coupling set different sizes, rubber ( for gasket ), copper lug (ring) 16 ,25, 35,50 mm, alluminiam lug 35, 50, 70,95, 240, 300 mm, relay ( l&t/ havels ) 110 amp. , 70 amp., contactor ( l&t/ havels ) 110 amp. , 70 amp., copper wire 3 core 50 sq.mm , 3 core 35 sq.mm, alluminium wire 4 core 50 sq.mm , 3 core 35 sq.mm, copper wire 16 sq.mm, insulation tape (pvc) red , yellow , blue, glass tape roll, cotton tape roll, transformer oil, sluce valve 150 mm, 200 mm, 300 mm, check valve 100 mm, 150 mm,, ball valve (brass ) 1/2 inch, 3/4 inch, 1 inch dia., g.i pipe nipple size 3 & 4 inch 1/2 inch, 3/4 inch, 1 inch dia., pvc end plug ( solid type ) 1/2 inch, 3/4 inch, 1 inch dia., m-seal 250 grm. pack, materials required for hand pump handle ( bharat/india mark ii ), head ( bharat/india mark ii ), pedastal ( bharat/india mark ii ), water tank ( bharat/india mark ii ), chain ( heavy ), axle ( heavy ), ball bearing, conecting rod with socket 12 mm 10 length (stainless steel ), g.i pipe ( tata/jindal/supreme ) 10 length , 32 mm dia., cylinder assembly complete set 2.5" (gun metal ), black tape 1" & 2", cylinder body2.5", rod socket ( ss) 12 mm, pipe coupling/socket ( tata ) 1.25" ( 32 mm ), front cover ( bharat/india mark ii ), check valve with washer, cylinder ring ( lather ), croom washer ( burhani/ nizora ), dlp nut bolt, plunger, handle axle (stainless steel ), check valve washer, three plate, cylinder rod, ss hexagonal bolt m-6x25 mm long, chain nut bolt

Central Government / Public Sector

CTN :44894265

06 May, 2026 NA

Haldia - West Bengal

Tender For corrigendum : supply of rhm25r8083 portable primary injection set , rhm25r8083 automatic oil insulation tester

State Government

CTN :44055546

11 May, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of various consumable items for unit 1 to 7, wtps. - fevicol sr 998 (200 ml/tin), fevi bond, champion teflon tape roll size 1/2"x12 mtr, hss hacksaw blade size 300x12.5x0.63 mm, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., red oxide, light gray paint size 4 liters light gray paint size >> 1 liter., rustolene, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, pin terminal 1.5 mm2, pin terminal 2.5 mm2, fork terminal insulated 1.5 mm2, u type copper lug 2.5 sq.mm, 2.5 mm2 round lugs, ring terminal 1.5 sqmm, emery paper smooth fine size 38 mm x 50 m length, emery paper rough sizesize 220 x 280 mm, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, cable lugs 0.5 mm2 pin type, dowells make, cable lugs 0.5 mm2 u - type, dowells make, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, seamless copper tube -size: 3/8 inch od x 18 swg thickness withstand capacity: 1000 psi ., 1/4 inch od, 18swg thick, anneled pvc sheathed seamless copper tube having minimum 15 meter long, seamless tube a 213 tp316 1/4 inch od x 2.1mm thick, m.seal putty fast curing 100 gms/pack, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), pvc insulated copper unshethed flexible wire 1.0 sqmm,1100v, copper armoured,flexible power cable 3cx1.0 sq. mm., tube cutter, tube bender, copper cable 3 corex2.5 sqmm, power cable 3 corex1.5 sqmm, crc-226 contact cleaner in 415 ml/300 gram spray bottle., puff seal have polyurethene based foam sealing compound, cable tie for electricals wires & cables., test leads (probes) for digital multimeter, hand drill machine size 13mm, long rang rechargeable torch with charger., rechargeble torch, carbon cleaner spray, fevi kwik tube 3 grams, 16 amp 240 volt, 3 pin plug top, araldite 180 gram/tube, digital vernier calipers size - 0-300 mm mitutoyo make, digital vernier caliper, size - 0-150 mm, freemans make measure tape 15 metre long, fevicol sr 998 (200 ml/tin), fevi bond, champion teflon tape roll size 1/2"x12 mtr, hss hacksaw blade size 300x12.5x0.63 mm, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., red oxide, light gray paint size 4 liters light gray paint size >> 1 liter., rustolene, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, pin terminal 1.5 mm2, pin terminal 2.5 mm2, fork terminal insulated 1.5 mm2, u type copper lug 2.5 sq.mm, 2.5 mm2 round lugs, ring terminal 1.5 sqmm, emery paper smooth fine size 38 mm x 50 m length, emery paper rough sizesize 220 x 280 mm, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, cable lugs 0.5 mm2 pin type, dowells make, cable lugs 0.5 mm2 u - type, dowells make, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, seamless copper tube -size: 3/8 inch od x 18 swg thickness withstand capacity: 1000 psi ., 1/4 inch od, 18swg thick, anneled pvc sheathed seamless copper tube having minimum 15 meter long, seamless tube a 213 tp316 1/4 inch od x 2.1mm thick, m.seal putty fast curing 100 gms/pack, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), pvc insulated copper unshethed flexible wire 1.0 sqmm,1100v, copper armoured,flexible power cable 3cx1.0 sq. mm., tube cutter, tube bender, copper cable 3 corex2.5 sqmm, power cable 3 corex1.5 sqmm, crc-226 contact cleaner in 415 ml/300 gram spray bottle., puff seal have polyurethene based foam sealing compound, cab

Central Government/Public Sector

CTN :45011343

18 May, 2026 7.34 Lacs

East Singhbhum - Jharkhand

Tender For supply of painting inspection and license renewal of fo storage tanks : : - supply of epoxy primer red oxide paint one coat for painting 1000 sq meter surface area , supply of synthetic enamel aluminium paint 02 coats for painting 450 sq meter surface area , supply of eu de nil paint one coat for painting 550 sq meter surface area , painting of fo tanks with structural platforms of surface area 1000 sq meter including scaffolding brushes turpentine oil etc , thermal insulation of steam pipelines including cost of material labour etc , arranging for peso and submission of fo license

Central Government/Public Sector

CTN :45013767

08 May, 2026 NA

Ahmedabad - Gujarat

Tender For supply of transformer oil pump set complete with motor (mph) rating 4.3 hp (3.2 kw), 2 pole for operation voltage 415 +/- 22.5% vac, 50 hz, insulation 'h' class, full load rpm 2850, confirming to clw specn no. clw/es/o-1/alt. l. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45013966

20 May, 2026 NA

Kazipet - Telangana

Tender For supply of set of spares for transformer oil filtration plant. set consists of 04 items as follows: 1)nitrile polymer rubber o ring compound as per group c of 3.2.4.1 to irs.r 48/88 or astm d2000 / is 3400 dimensions :od-26mm,id-16mm,thickness -5mm; qty: 100 nos. 2) nitrile polymer rubber cord dia 4mm compound as per group c of 3.2.4.1 to irs.r 48/88, or astm d2000 / is 3400; qty: 10 meters. 3) nitrile polymer rubber cord dia 8mm compound as per group c of 3.2.4.1 to irs.r 48/88,or astm d2000 / is 3400; qty: 10 meters. 4) teflon washer made of virgin ptfe,conforming to astm d4894 / astm d4895 is 13708,suitable for transformer oil,temperature range -200 degree centigrade to +260 degree centigrade, excellent electrical insulation and chemical resistance. as per dimensions :inner dia-7mm,outer dia -14mm,thickness -3mm; qty:200 nos. [ warranty period: 24 months after the date of delivery ]

CTN :44875737

01 May, 2026 NA

Dimapur - Nagaland

Tender For bid to ras supply of shelter parts for genr shed , pvc casing caping 25mm , pvc insulated heavy duty 1100 volt grdae cable with aluminum conductor twin core , surface and wall mounted led tube rod 20 watt , mcb db 4 way spn 240 volt , mcb 32 amp sp 240 volt , insulator dp 40 amp dp 240 volt 50 hz , pvc switch board 8 inch into 10 inch , scocket pt 15 by 16 amp 240 v , scocket pt 5 by 6 amp 240v , 1 sqmm single core cable , 1 point 5 sqmm single core cable , insulation tape19mm width 25mm long , piano type switch 5 by 6 amp , piano type switch 15 by 16 amp , black screrw 1 inch , earthing set complete , lighting conductor with safe chemical , pcc cement is 1489 , coarse sand , 20mm aggregates , 40mm aggregates , hardcore 63mm stone aggegates , pcc solid block 400 into 200 into 200mm , 12mm plyboard for form wide , pvc strips of size 3mm thick 38mm wide , 12mm dia tmt bar as per is 1786 , 8 mm dia tmt bar as per is 1786 , self trapping screw 55mm , self trapping screw 100mm , pop revit machine , pop revit , high carbon steel casing silicon gun , silicon tube minimum 280ml , water proofing compound , white cement , lime unshaked of best quality , red oxide primer , turpentine oil , synthetic enamel piant white colour , synthetic enamel piant black colour , synthetic enamel piant green colour , weather coat paint for internal and external paint for wall , roller brush 4 inch of best quality , foam roller brush for wall pianting of size 7 inch , painting brush 3 inch , writing brush , binding wire 20 gauge , machine pressed precast concrete interlocking block of size 225 into 112 , pcc kerb stone type b1 size 300 into 100 into 300mm , kerb stone synthetic enamel piant yellow and black , turpeline oil thinner , painting brush 3 inch , heavy duty double wheel trolley 160 kg capacity ms body 18 gause ) /bid number : gem/2026/b/7438413 * /dated: 13-04-2026 & & / bid document 1 / 36

Insulator Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector