Get complete information related to latest Insulator Rod Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Insulator Rod Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Insulator Rod Tenders.
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122605 0530pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments. location road no. 3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int
Tender For auction sale of depot ferrous scrap - 12161ms26b, 98050011, quantity- 159.920 mts. scrap condemned unserviceable ms- cs mixed scrap of carriage and wagon and loco items consisting of bolts, nuts, pins, washers, cotters, head blocks, distance blocks screw rods, handle supporting bare plates, ms back locks, mmts racer cover, locking screws, nuts, bmbc components, jigs fixtures and loose spares, safety nuts, jack wheel arms, schaku couplers, coupler spares, tension rods, sheet cut pieces, levers, links, iron skids, anti roll bar with fork link, pins electroplated, cut pieces of angles, pipes, channels, flats, plates, rod cut pieces, sabs, cbc housings, common pipe bracket, pivot caps, buffer plates, cbc coupler handles, coupler rods, barrel bush, silent blocks, shackles, wide jaw adaptor, clamps, compensating ring, wire rope, push pull rods, towing trolley, jack frame, anchor links, lashing chain assembly, destroyed hangers and blocks, cap for fuel inlet pipe assembly, cbc back stopper plates, brackets, gear wheels, sheets, pivots, washers, equalizing stays, dampers, shock absorbers, dmb rings, dashpots, trolley wheels, brake shoes, compressor parts, brake heads, keys, dip lorry wheels, stays rings, chain cut pieces, draw bar spindle rod, draw bar support beam, ferrous scrap of emus, body gear, under gear, spring gear, draw gear, cbc operating handle, cbc supporting device, cbc support plate, air spring suspension bellow, suspension rod, socket, ring retainer, long bolts, mmts rear cover, speedo meter cover, retainer cap, brake cylinder, brake calliper, center pivot, equalizing lever, axle box covers, berth and door frames, filters, lever hangers, ci cylinder bodies, diesel loco items, ci hose cocks, piston, piston trunk, ratchet with screw rods, flanges, destination boards, small dia. springs, hooks, articulated lock lift lever assembly, collars, links, pivots, cylinder body, bp and fp cocks, c.r.tank, locking screw, locking cups, dmb ring, sab end push rod, sand ejectors, adaptors, wearing plate, centre pivot cover, z levers, springs, caliper bolts, reducing bushes, control arms, seaters, center pivot tops, pull rods, punching dies, round rods, bogie under frame cut pieces, ms drilling jig, horizontal bolts, hex bolts with nuts, dividing plates, side bearer guide, lever box, center pivot bottoms, ct rb bearing components, fabricated structures of sorts and sizes, with or without attachments of rubber, fiber, nylon bushes and other similar carriage, wagon, mmts, emu, dmu and loco items including rusted and corroded sheets. location- bin no- 161, left side of road no- 1. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.
Tender For supply of tension insulatorrod-2500 of short neutral assembly(ptfe) gf-2500(one set consisting of 04 pieces of tension insulatorrod) as per rdso spec .no. ti/spc/ohe/sns/000 rev .slipa &c slip no.1.make-: core approved vendor sources. [ warranty period: 30 months after the date of delivery ]
Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122605 0918 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments this material available at lot no.0636. location: road no.3to4cross and road 3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For auction sale of depot ferrous scrap - 98050060- scrap released cs and ms carriage and wagon items consisting of cbc components such as side frame, coupler body, bolster, draft gear with without rubber attachechment, yoke, knuckles, coupler rod, face plate, cp top and bottom, spring plank, wedge block, end buffer plunger, cvc, buffer,pulley, springs, ms angles, tie bars, fasteners, axle housing, melting items, pads, wagon census bogies, adopter such as wide jaw and narrow jaw, ingot with or without attachment and other carriage and wagon items etc., if any, unserviceable forrly, the lot is in two stacks. stack 1 is at open plot and stack 2 is at bin 8a/b. delivery of stack 1 will be given first.remark- revision of lot no: 622603003
Tender For supply of tension insulatorrod 2500 of ptfe neutral section gf 25, spare part (one set consisting of 4 pieces ), oems id no:- 659.500.013.as per rdsos specn. ti/spc/ohe/sns/0000.,rev. 1 with a&c slip no.1 make -arthur flury or equivalent. [ warranty period: 30 months after the date of delivery ]