Latest intake valve Tenders | Government intake valve Tenders

Private Sector

CTN :40793089

30 Jun, 2025 NA

Jhajjar - Haryana

Tender For tender for supply of solenoid valve for nuva ahp 24v dc , seal kit for p5003lw2-12-3g nuva ahp , solenoid valve for esp ahp 24v dc , seal kit for p5003lw2-6-2g esp ahp , solenoid vlave for btm ash ahp 24v dc , seal kit for rotex sbyv p5003lw2-25-8g , sol. valve for bh by silo pjc ahp , rotex sov 21101c-12-4g-b12-m6+24v-22h , sol v/v 21101-25-8g-b12-24vdc rotex , repair kit for rotex s by v -21101v01-25-8g , diaphragm for pjc sol vlv 24106-52-12g , repair kit for rotex make solenoid , sov rotex 20101-3-4r-b5-m6 24vdc-16h , repair kit for rotex sv-98-20101-3-4r , repair kit rotex p5003-12-4r-b5 24vdc , rep kit for rotex sol 24102-12-4r fire , sov rotex 24102-12-4r-b12-m6-24v fire , coil sov 30310-4-2r-b5-s1 230vac swas , sol vlv-30301-1 point 8-2r-b5-i-24dc-22 , rp kit solvlv 30301-1 point 8-2r-b5-i-24dc-22 , rp kit sol vlv-20101-2 point 2-2r-230v-50hz-16 , sol vlv-20101-2 point 2-2r-230v-50hz-16 , rp kit 30211-3-sb-b5 plus i-24v-dc-22-h , coil 30211-3-sb-b5 plus i-24v-dc-22-h , diaphragm for sov 24101-40-12g rotex , sov rotex 24101-40-12g-b12 110vac dfds , repairkit-s by v-24101-20-12gb12 -rotex -dfds , sol vlv 30125-2-2g-b5-230v-50hz-06 , coil sol vlv 30125-2-2g-b5-230v-50hz-06 , solenoid valve -rotex -51400-6-2r-b2-24vdc , rotex sov 51431lc-20-8r-b2-24dc fdr o by l , solenoid vlv 51431lc-6-2r-b2-m7-s2 rotex , solenoid coil-rotex vaf-314-10-3r-b9

Central Government/Public Sector

CTN :40794529

07 Jul, 2025 NA

Nagpur - Maharashtra

Tender For supply of fly ash intake valve assy,diffuser

Central Government/Public Sector

CTN :40772721

11 Jul, 2025 NA

Mandal - Gujarat

Tender For supply of elgi make screw compressor spares > - consumable spares list, air filter element, oil filter, element separator (e90-160), minimum pressure valve kit, intake valve kit (e132-160), coupling element e90-160, blow down valve kit, pressure transmitter, temperature sensor, air inlet system, nc intake valve 4 inch hpkg-120, ss t bolt clamp jt6a20-dia 170, elbow; rubber 6 , indicator: air filter clog, drive coupling,dia 80/60, a/e pkg gr:1.326 axis 284, connector; pvc hose 3/4", steel reinforced pvc hose 60mm, after and oil cooler assy-e-160, base assembly-e160, bracket - airend, vertical tank e132-e160, hose-3 inch discharge, bracket air filter assy, filter head 360 lpm machining, dia 550 pusher fan 400v, oil return line assembly, exhaust fan 6" sq 220v, pressure regulator prne, ball valve 3, hose set e90-e160 wc (4nos), filter assy. -360 lpm, fan dia. 42" with hub ee160, steel reinforce pvc hose 20mm gre, o/c &a/c assy ee160 alu.coler, tank rec e90-e160 horizone, pipe assy mpv hose to cool, hose assy mpv to cooler, pipe with elbow assy, hose assy 1 1/2 tv to oil out, hose assy tv to oil in, pipe with flange assy, pipe tee assy, hose with metallic bellow 32nb, hose assy airend to tank, hose assy 1 1/2 tank to tee, air end package 1.11: 1, steel reinforce pvc hose 10mm gre, steel reinforce pvc hose 20mm gre, steel reinforce pvc hose 50mm gre, control system of model e90- e160, hex reducing nipple 1/4 (m) x 1/8 (m), pr regulator, tms elbow x (t), tee pipe , tms coupling x (t), hex nipple , connector hose adapter , hose x 1000l (e132-160), tube 2 mts, spares for compressor of model e132- e160, base & drive system, anti vibration mount - e132- e160, cooling and lubrication system 90-160 wc, o ring 54.2 x 47.2 x 3.5, element, therm valve 155 deg, elbow tms 1 x 1 , tee; pipe; npt, pr transmitter 16 bar, 4.20 ma, filter oil, oil filter indicator, nipple; hex; npt, seperator element 1200 cfm, gasket flange 2 for e160-8 bar, mpv with check valve -mpvl65, pr. releif valve, plug, hex 1 npt, oil sight glass, nipple ; pipe; npt x 300, elbow tms x npt, transparent tube 8x6 1.2, coupling; tms; 1/4 x1/8 npt, o ring id 80.0x2.5 thick, hex nipple, tee pipe, pressure switch 0.2-7.5 bar, pressure guage, spares for compressor of model e75-85, consumable spares list, neuron ii, air filter element, oil filter, element seperator, minimum pressure valve kit, intake valve kit, pr. regulator, coupling drive (or) coupling element, pressure transmitter, temperature sensor, hose assy-a/e to tank, blowdown valve kit, actuator kit, oil sight tube6mmx 4mm - 0.5m, ferrule 6 mm, pipe sets dis sys e75-horizon, pipe assy mpv to hose, hose assy mpv to cooler, pipe assy ms to ball valve, discharge hose, hose oil line, fan assy 23 inch, air inlet & control system, 5/8 x m10 bush reducer, intake valve nc, hex nipple x 1/8 npt, pressure regulator, tee branch x npt, tubing 6mm 1.5m, coupling tms x 1/8 npt, connector npt, ss t bolt clamp dia 170, connector rubber 6 , rubber hose duct connector, ss t bolt clamp, elbow npt, elbow tms x npt, temp sensor, discharge system, tms elbow, minimum pressure valve, water seperator, hose mpv out to ac, scavenging line pipe, tms elbow npt, tms elbow, pressure releif valve 1 npt, o ring, hex reducing nipple, assy strainer, tms elbow, hose assy 80 nb, hex plug 1 npt, oil sight glass tube 0.5m, pipe nipple npt, tube nylon 6x4 1.5m, tms elbow, seperator, pressure transmitter, cooling system, oil cooler & after coller assembly, fan motor 2 hp, lubrication system, elbow 1 x m42, pipe tank to tv, tee branch 1 npt, spin on filter, filter head, element thermal valve, housing thermal valve 1 npt, swivel elbow connector 1 npt, pms coupling 1 bsp x 1 od, swivel elbow connector 1 bsp x 1 od, swivel banjo connector m27 x 2, motor and base assembly system, coupling drive, anti vibration mount motor, anti vibration mount airend, recommended spares for e18-e22 & & e30-e7.5 ac 415v for horizon series kit of spares upto 2500

Central Government/Public Sector

CTN :40797009

25 Jun, 2025 NA

Multi City - Multi State

Tender For supply of nitrogen cylinder capacity 50 l, working pressure 200 bar with pressure gauge fitt ed with fire rated automatic fire suppression activation solenoid valve with manual override lever duly filled with nitrogen at 200 bar +/- 10%. sanrok enterprises part no. 2ed-245-4979 as per rdso spec. no. rdso /2013/cg-06 rev.2 or latest, make/brand: - sanrok [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40797011

25 Jun, 2025 NA

Multi City - Multi State

Tender For supply of nitrogen cylinder capacity 24l, 200 bar with pressure gauge fitted with fire-rated automatic fire suppression activation solenoid valve with manual override lever duly filled with nitrogen at 200 bar fo r fdss, make: fogpro. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40796500

05 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of nitrogen cylinder capacity 50 liter, working pressure 200 bar with pressure gauge fitted wit h fire rated automatic fire suppression activation solenoid valve with manual override lever duly filled wit h nitrogen at 200+/-10% bar for automatic fire suppression system confirming to rdso spec no. rdso/20 13/cg-06 (rev.latest). suitable to nitrogen cylinder fitted in automatic fire detection cum suppression sy stem supplied by sanrok enterprises or jk exim or similar in lhb power car & pantry car coaches. [ warra nty period: 48 months after the date of delivery ]

Central Government/Public Sector

CTN :40797460

26 Jun, 2025 NA

Rewa - Madhya Pradesh

Tender For supply of manual release valve to part no. b04801208 for manual fire suppression system as per sanrok part no.2ed-245-1865. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40796792

07 Jul, 2025 NA

Multi City - Multi State

Tender For supply of refilling of nitrogen gas cylinder - capacity 50 l, 200 bar +- 10% scope of work - refilling of nitrogen cylinder as per rdso specification no. rdso/2013/cg-06(rev-3) or latest with fire rated valve dul y certified by peso. refilled cylinder with valves will be provided and empty nitrogen cylinder with fire rate valve will be taken back.(inclusive of to & fro transportation cost of nitrogen cylinder and fitment charges) [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40752421

10 Jul, 2025 NA

Koderma - Jharkhand

Tender For supply of deluge valve model-a, 150 nb flanged to ansi b16.1, cast iron body with ductile iron clapper & seat , diaphragm of deluge valve 150 nb, model-a, make of dv-hd fire protect pvt. ltd , diaphragm of deluge valve 100 nb, model-a, make of dv-hd fire protect pvt. ltd. , diaphragm of deluge valve 80 nb, model-a, make of dvhd fire protect pvt. ltd.

Central Government/Public Sector

CTN :40351999

26 Jun, 2025 NA

Numaligarh - Assam

Tender For corrigendum : supply of plug valves for ag and ug piping for msb, pfcc, gds and ff for nrep as per technical specifications for numaligarh refinery limited, assam, india - group-1 (group wise evaluation)supply of plug valve for ag+ug piping for nrep project including tpi charges as specified in material requisition., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in pref

Intake Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors