Latest interlock shutdown system Tenders | Government interlock shutdown system Tenders

State Government

CTN :45691035

30 Jun, 2026 NA

Ropar - Punjab

Tender For procurement of miscellaneous spares for mounting various actuators, solenoids, air limit switches, set of o-ring -- system ggsstp, ropar tender enquiry - grub screw with nut (ht) for mounting pd-28 actuator. size 10x40nim, nut bolt (ht) for mx-450 and cylinder body. size8x25 mm, dowel pin (ht for lock air cylinder assembly. size 10x50 mam, l-key bolt (cs) for air limit switch and cylinder. size 6x40mm., cylinder lock of esp and pd-15(cs). id-20mm and thickness imm, l-key bolt(cs) to lock the stopper of cylinder. size 6x30mm, actuator lock pd-28(cs), id-23mm and thickness-imm, actuator lock pd-50, pd-75 and cylinder lock of apη ducts(cs) id-33mm and thickness imm, l-key bolt for cylinder.6x40mm, screw with nut for mounting pressure switch. size(cs) 3x40mm., grub screw for mounting pd-50 & pd-75. size 12x50mm, nut-bolt(cs) for mounting electrical limit switch (4 to 7 fields). size 4x50mm., grub screw with nut (cs) for mounting electrical limit switches of pd-28, pd-50 & pd-75.size 4x25mm, nut bolt(cs) for mounting solenoids. suze 3x35mm, l-key bolt for air limit switch. size 3x40mm., l-key bolt(cs) for air limit switch. size 3x200mm, nut bolt (ht) for air limit switch. size 12x50mm., l-key bolt for air limit switch. size 4x35mm, l-key bolt(cs) for air limit switch. size 4x20mm, cylinder pin. drawing as perannexure-7, quick exhaust valve diaphragm of size 65mmdiameter thickness-2mm, material synthetic rubber, air limit switch o-ring of synthetic rubber., set consists of, size id-hom., thickness 2mm, 1.size: id = 1 , thickness 2mm, hsn code 40169320, screw with nutcs) 4x25 mm, nut-bolt (h.t) 12x25 for mounting mx-450, cylinder pin (160x250mm), drawing as per annex.-4, nut-bolt(h.t) 10x35 for coupling mx-450, l-key bolt(cs)(6x70mm) for poppet valve., diaphragm for quick exhaust valve diameter 6.5mm &thickness imm., cylinder spacer lock. drawing as per annex-2, stud for pd-28 mounting(10x12mm diameter-25 x40mm length(grub screw), stud(cs) for pd-50 and pd-75 mounting(12x14mm) diameter-10&75mm, stad gir pd-15 mounting(8x10mm) diameter-10x45mm length, hex nipple w(brass), hex nipple w"(ss), hex nipple "x3/4"(85), blow valve cup washer 100 nb drawing as per annex-6., blow valve disc 100 nb drawing as per annex-5, blow valve cup washer 50 nb. drawing as per annex.-1., blow valve disc 50 nb drawing as per annex.-3, stud with nun (cs) (8x35 mm) and overall 50mm length., vent filter sol viv top plate, drgas per annexure-8, solenoid valve rotex make" model 51400-6-20, solenoid valve repair kit

CTN :45695412

15 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of esp spares for emitting frame system of unit-3/sdstps -0 supporting beam,drg no. 2-79-021-01451 (item no.01 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part top(6-tube assembly), drg no.2-79-021-00880 (item no.02 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part top(7-tube assembly), drg no.2-79-021-00880 (item no.03 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), suspension rod assembly), drg no.3-79-021-00245 (item no.05 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(4-tube assembly), drg no.2-79-022-00881 (item no.13 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(7-tube assembly), drg no.2-79-022-00881 (item no.14 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(8-tube assembly), drg no.2-79-022-00881 (item no.15 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(4-tube assembly), drg no.2-79-032-00882 (item no.17 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(7-tube assembly), drg no.2-79-032-00882 (item no.18 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(8-tube assembly), drg no.2-79-032-00882 (item no.19 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), vertical stay, drg no.3-70-032-01280 (item no.30 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257(is 1239)

State Government

CTN :45670796

24 Jul, 2026 20.51 Lacs

Multi City - Telangana

Tender For supply of certain spares for maintenance of esp of boiler maintenance division. - inner arm with bolt and nut for jointing two port, plane bearing assembly duly machined with 02 bolts,nuts and 2 nos.pins as per sample for collecting electrode rapping system of esp type:faa-9x37.5m-2x96135-2, outer arm for collecting rapping mechanism (big roller), outer arms for emitting rapping mechanism (small roller)

CTN :45626359

04 Jul, 2026 NA

Bokaro - Jharkhand

Tender For esp spares for tpp boilers - item to be supplied, cat. no: 08520203027outer arm with inner arm for colllecting rapping mechanism, cat. no: 08520203030outer arm with inner arm for emitting rapping mechanism, cat. no: 08520203006eerm rapping shaft, cat. no: 08520203031big pin wheel, cat. no: 08520203032small pin wheel, cat. no: 08520203013emitting drive vertical shaft, cat. no: 08520203024c i bearing, cat. no: 08520203002shock anvil, cat no: 08520203060geared motor with gearbox for emmitting rapping drive (vertical flange mounted), cat. no: 08520203042geared motor with gearbox for collecting rapping drive (horizontal foot mounted), cat. no: 08520203037shaft insulator, cat. no: 08520203053support heater, cat. no: 08520203054hopper heater, cat. no: 08520203009collecting rapping shaft, cat. no: 08520203067emitting carbon / graphite bush, cat. no: 08520203062cerm outer arm, cat. no: 08520203063eerm outer arm, cat. no: 08520203039screen-a for inlet gd system, cat. no: 08520203017screen- b for inlet gd system, cat. no: 08520203021u profile (guide plate) for collecting electrode, cat. no: 08520203025locking / adjusting ring of bearing for cerm, cat. no: 08520203026shim plate for crm bearing, cat. no: 08520203033top shock bar guide, cat. no: 08520203012emitting electrode - spiral

corporations/Associations/Others

CTN :45601972

02 Jul, 2026 25.01 Lacs

Bardhaman - West Bengal

Tender For supply of esp spares for dstps u2 overhauling d d - cerm shaft assy (1 set = shaft end 2 nos. + d 50 shaft 4 nos. + sleeve 4 nos. + set ring 4, nos.). esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-en-24, gd rapping shaft assembly for esp 500 mw (1 set = shaft end 1 no. + d50 shaft 2 nos. +, sleeve 2 nos. + set ring 2 nos) esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-, en-24, eerm vertical shaft assembly d-40 for esp 500 mw (1 set = shaft 3 nos) esp type:- faa-10x, 45h- 2x90140-2,for esp of 500mw. shaft-en-24, eerm d-50 shaft assembly for esp 500 mw(1 set =shaft 2 nos.+ sleeve 1nos. + set ring 2, nos. +key 1 nos.) esp type:- faa-10x 45h- 2x90140-2. for esp of 500mw. shaft-en-24, plain bearing,mat: c.i. gr-25 esp type:- faa-10x 45h- 2x90140-2, inner arm for cerm/eerm/gdrm outer arm hammers (2 half with all nuts and bolts;, flat - ms is 2062) esp type:- faa-10x 45h- 2x90140-2, outer arm for collecting rapping system, roller wheel- en-08, pin -en-24, arm and washer- ms is, 2062 esp type:- faa-10x 45h- 2x90140-2, outer arm for emitting rapping, mechanism, roller wheel- en-08, pin -en-24, arm and washer- ms is 2062esp, type:- faa-10x 45h-2x90140-2, pin wheel big for eerm 500 mw, material:c-45 & pin-en-24 esp type:- faa-, 10x 45h- 2x90140-2, pin wheel small for eerm 500 mw mat: plate (ms, is 2062), round teeth (en-24), esp type:- faa-10x 45h- 2x90140-2, shock pad, en-24 esp type:- faa-10x 45h- 2x90140-2, thrust pad (of thrust bearing) for eerm esp type:- faa-10x 45h- 2x90140-2, material: en-, 24, set ring, material: en-8 esp type:- faa-10x 45h- 2x90140-2, thrust bearing for eerm, esp type:- faa-10x 45h- 2x90140-2, material: en-24, seam for plain bearing adjustment(2 mm) esp type:- faa-10x 45h- 2x90140-2, round cross section. non asbestosrope of size 8 sqmm fors ealing/packingpurpose. capcity upto 250, degree celsius, square cross section. non asbestos rope of size 25 sq mm for sealing/packing purpose.capcity upto, 250 degree celsius, guide angle 75x50x6mm for esp shock bars, length 5000mm, u slot at 300mm is2062 e250a esp, type:- faa-10x 45h- 2x90140-2, m12×50mm hex head ht bolt and nut with washer for esp, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 50 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 100 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367

State Government

CTN :45504174

01 Jul, 2026 NA

Multi City - Telangana

Tender For tggenco-ktps-vii stage-cam-enquiry for supply of blower spares at esp and silo area infly ash handling system of cam division

CTN :45488935

30 Jun, 2026 41.38 Lacs

Murshidabad - West Bengal

Tender For procurement of esp spares for unit 4 esp overhauling during under ahp-em,stage ii during 2026,sgtpp - procurement of esp spares for unit 4 esp overhauling during under ahp em ,stage ii during 2026,sgtpp, ci bearing,collecting rapping ( plain bearing (ci) for crm & erm system,mat-is-210 gr-20 with 02 nos bolt, id-51 mm and 50 mm thickness. ), ci bearing for erm vertical shaft for esp dia-40mm. ( bush along with outer assembly. ), set ring for bush bearing for esp for 500mw esp, thrust bearing of em vertical rapping shaft ( mat-en-8. ), bottom bearing # of em rapping vertical shaft, major pin wheel big ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), minor pin wheel small ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), heating element for esp hopper for esp for 500mw esp. ( 440vac,for 500mw bhel esp, rating-500w. ), heating element for shaft insulator for esp for 500mw esp. ( for 500mw bhel esp, rating -1.0kw,type- breathing type tubular, 415v. ), heating element for support insulator for esp for 500mw esp., shaft insulator for esp for esp for 500mw esp. ( suitable for 500mw esp,make-m/s. bhel. ), support insulator, type-cylindrical for esp for 500mw esp ( od: 435 + 10 mm; id: 379 + 10 mm; height: 375 + 5 mm,for 500 mw bhel make esp. ), anvil for shock bar assembly #, inner arm for rapping hammer for esp moc-en 8 ( inner arm(ms) for rapping hammer suitable for m/s. bhel make esp ,2x500mw. ), emitting electrode for 500mw esp for esp model faa-9x45m-2x100150-2, hammer assembly,em rapping system # ( outer arm/hammer for eerm of 500 mw bhel make esp ), hammer assembly,col rapping system # ( outer arm/hammer for cerm of 500 mw bhel make esp ), pin insulator for disconnecting switch for esp c.no-71-999, crm horizontal shaft, dia-50mm for esp shaft 1-3 length -4250mmrnshaft 2-3 length -4650mmrnshaft 3-3 length -4790mm ( moc- en8, 400 mm pitch, as per drg. no: 2-79-725-04299 of 500mw bhel unit. section: 02,03 & 04. sleeve tube to be given seperate 04 nos. per set. ), shaft,end,d50xl940mm,en8 w/key&key slot for esp cerm shaft as per bhel drg no: 2-79-725-04299 ( moc: en8 ), shaft,eerm shaft,vertical,dia-40mm for esp 9900mm long,with sleeve,moc-en8 or080m40-bs970 or equivalent ( for 500 mw bhel make esp ), shaft,eerm shaft,horizontal,dia-50mm for esp 9270mm long,with sleeve and set rings,moc-en8 or080m40-bs970 or equivalent ( 03 parts(part-i with key,part-ii & part-iii) with 02 number set ring,02 number sleeve.bhel drawing no.-2-79-716-03812. ), gdrm d-50 shaft moc-en-8 with 19 holes for 500 mw esp serial no-faa-9x45m-2x100150-2 , 3 parts shaft with 19 holes.shaft with sleeve and set rings., big hammer for cerm shaft for 500 mw esp serial no-faa-9x45m-2x100150-2 drg no:2-79-725-04299

Central Government/Public Sector

CTN :45317866

04 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For tender for supply of spares for fda system for process esp -fire alarm cntrl panlnfs 320ehoneywell , smoke dtctrfsp 951 b501 whitehoneywell , heat dtctrfst 951r b501 whitehoneywell , sounder wflashersyshs fcm 1honeywell , mntr/ctrli omdulfmm frm honeywell , heat sensg cable modultr887 mhoneywell , liner heat sensng cable887eolhoneywell , actv rptr panllcd2 80 abf 1dbhoneywell , heat dtcr cablss ld 68 155 1khoneywell

CTN :44624116

09 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with bhel for supply of spares - field controller:areca-iii , m/s bhel, hnk:valve spindle(rhs), assembly of gland ring exhaust pedestal, assembly of gland ring cover gen end, set of glands 30 mw tg, thermocouple drb-200 l=6000 part no. : ., thermocouple type-dra-300 hpt bearing pa, thermocouple for esv, rtd d-1;l=140mm,d=6mm,1/2"m, turb stm temp ,t/c, tc:b,l=375,d6mm,dup, thermocouple type b l=515, hpt brg mtl temp,t/c, turb/seal temp,t/c, hwm-846, t/c type-b;l=465mm;esv+hpcv, xrp883:journal shaft assy, complete flame scanner head assembly. pa, fibre optic cable for flame scanner part, lens barrel assembly for scanner part no, housing elet mod, connectors:connector prefab. cables 5mts, flame scanner lens part no. : - drg no., collimator assembly for flame scanner pa, compression spring for flame scanner, bhel-3:c3000spl-glvsw-mo-f2250mm:complet, bhel part iii:c3000-sv-sw-hw-f22 2":comp, bhel part iii:c3000-sv-sw-hw-f22,1":comp, bhel part iii:glv-c-1500-sw-hw a-1051":c, 2-c1500-sv-sw-hw-f22:comp. valve assy(hw, bhel part iii:c800-svsw-hw-a105sst1/2":c, bhel part iii:c2500-sv-sw-hw-f22,size 1", 25nb-c-800-hw:complete assy., bhel-4:2-c2500-glv-hw-sw-f22:complete as, bhel part iii:c1500-sv-sw-hw-f221-1/2":c, bhel part iii:c800-sv-sw-hw-a105-sst 2":, bhel part iii:glv-a-105-c1500-sw-1-1/2":, bhel part iv:c1500-sv-sw-hw-a105-1/2":co, bhel part iii:c1500-sv-sw-hw-f22 1":com, xrp883:multiport outlet and liners, xrp883:seal wear ring, xrp883:bull ring clamping ring(4 seg./se, xrp883:spring stud brg(wear sleeve), xrp883:bowl hub cover for bowl mill xrp-, xrp883:trunnion shaft end cap-thrust end, xrp883:trunnion shaft end cap-free end, xrp883:trunnion bushing retainer, xrp883:thrust plate-thrust end journal h, xrp883:thrust plate-free end, xrp883:trunnion shaft, xrp883:spring air seal cap, xrp883:spring stud brg.housing, xrp883:spring guide var-02, xrp883:spring housing cover var-02, xrp883:spring stud adapter, xrp883:spring preload stud var-02, xrp883:spring orifice plate, xrp883:journal pr.spring, xrp883:deflector blade, ref no: hy-308.0, xrp883:spring stud lock nut, xrp883:inverted cone spare, xrp883:stop bolt assembly, xrp883:upper journal housing, xrp883:lower journal housing, 50 pin scsi cable set,g/f, prefab i/o cable set,g/f, surge spprsr cn9067557145, wire wound resistor,cn9060372115, maxpac 37cond.ribb on cable assy. 84, res zero ohm 0.25w,dv0692305963, res mf 10m 1% 0.6w 50ppm,en7460190586, terminal block cbt250 ,cu7433498508, fuse base & carrier, tag boardassyly.with 5poles,d99260005501, electrnc componet:blank modules(48*24)mm, diode stud type 1400v; 95a, maxpac cable assy. 28" part no. : -d5945, ars100:valve stem, 250mw:screw cap soc pm10x20, 250mw:locking plate, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:rectangular wire 1.7x1.4, esv:piston, jacking oil system:jacking hose brg 5&6, jacking oil system:jacking oil hose brg-, xrp883:worm gear & worm shaft assy, 250mw:caf gasket, 250mw:gasket dia 1240/1172, s3, 250mw:o ring, 250mw:o ring, 250mw:gasket, esv:stud m30x150, esv:cap nut am 30, 250mw:governor impeller, 250mw:threaded bushing, over speed trip system:wheel, 250mw:clamping piece for 3l &3r, thri 108/44:sealing strip 8x2, l=750mm, 250mw:locking plate for 2l & 2r, 250mw:locking plate, insulator:bushing insulator, insulator:pin insulator, insulator:shaft insulator for esp, hnk:sealing ring (lip seal), cv & servomotor:plug with stem, gen(bhel-thri 86/35):sealing ring assy., xrp883:gearbox asy, wb-1e:complete assembly, bhel davr:pwr mdl 6qg12 3-ph 68912sss006, oil gun assy, bhel davr:pulse coupling stage mdlassy u, bhel davr:trfmr pwr 5kva 3ph ynyn0 220/4, bhel davr:res w.w 500w 5% 150r 50ppm, bhel davr:res ww 2k 5%25w pir25, bhel davr:mdl voltage level converter mo, bhel davr:distribution block 5way, colou, bhel davr:mdl 69203na1aa un0610av1, i/o, bhel davr:srg spr 150v-250v dc 3rt2916-1, bhel davr:shunt 50a/60mv; accy:0.5%, bhe

CTN :45113202

26 May, 2026 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : tender for supply of esp spares for meja 2x660 mw 100001743 - shock bar ce system , mj-m-ce-101 , part 01- , gdrm shaft , mj-m-gdr-101-14 to 18 , gd screen esp inlet , derm shaft , mj-m-dr-101-04 to 09 , pin wheel with pinion , mj-m-dr-101-18 and 19

Interlock Shutdown System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector