Tender For annual maintenance work for pwd branch with material & labours work year 2025-26 - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.ii in cement mortar., dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift., demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. i r.c.c. work, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying compacted w.b.m. 100 mm. thick of grading i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying cement concrete 1gem3gem6 1 cement gem 3- coarse sand gem6- hand broken stone aggregate 40 mm. nominal size and curing complete excluding cost of form work in gema foundation and plinth, providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete, providing and laying cement concrete 1gem3gem6 1- cement gem 3- coarse sand gem 6- crushed stone aggregates 20 mm nominal size and curing complete including cost of formwork in a wall caps per coping, providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc slabs and landings, providing and casting in situ ordinary cement concrete m-200 forkerbsperkerb blocks including formwork, curing and finishing complete., providing tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level, white stone bela masonry block in course in foundation, plinth and super structure with stone of approved quality in cement mortar 1gem5 1cement gem 5 course sand including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 gem 4 course sand, providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. ii cement mortar 1gem4 1 cement gem 4 sand, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls for interior plastering up to floor two level and finished even and smooth including fini
Tender For emergent repairing work of mar using interlockingconcreteblock in different locations on both directions from mahisbathan bridge to haldiram bridge in new town, kolkata.
Tender For bid to ras supply of tin shed and hard standing and interlocking tilling of liquor waiting area - hard standing concrete and cement , colour coated cgi sheet , six standing square poles , four perling structure square pipe , six rafter structure square pipe , red oxide and enamel paint work , interlocking tilling
Tender For rehabilitation and special repairs to the existing concrete structure of 16000 mt gl bunker (comprising of 3 chambers) at ocp-iii chp, rg-ii area, godavarikhani, peddapalli dist, and telangana state.
Tender For providing and laying of interlockingconcreteblock pavements from d.no 12-3-69 to 12-3-136 besides veterinary hospital in sainagar 4th cross of 19th division.
Tender For extension of control room building providing foundation concrete for equipment plinth structure plinth and other allied civil works at thiruthuraipoondi railway sub station
Tender For corrigendum : repairs to distressed concrete structure/building in various locations and certain other works at inhs jeevanti vasco under ge gomantak
Tender For providing childrens playground equipment (jhula) in west campus near kendriya bhandar park of iit delhi. - childrens playground equipment, supply and installation of childrens playground equipment supply, delivery, and installation of a factory-fabricated suitable for children, constructed from high-quality powder-coated galvanized steel and weather-resistant hdpe or plastic seats and handles. the equipment shall consist with anti-slip grips and ergonomic support, mounted on a central pivot frame with heavy-duty bearings to ensure smooth and safe operation. all materials used shall be uv-stabilized, rust-resistant, and conform to playground safety standards. the equipment shall be securely anchored into a concrete foundation as per the manufacturer s specifications, complete in all respects including excavation, foundation, backfilling, and finishing to the required level.(the equipment must accompanied with test reports for quality, safety, durblity, and proper functioning of equipment), 1) providing and fixing deluxe 2 see saw as per specifications, 1.1) deluxe 2 see saw:- product area: minimum 2500 mm x 350 mm. safe play area: minimum 4500 mm x 1500 mm. see saw lever is made up of minimum 100 nb gi b- class pipes. lever length willbe minimum 2500 mm long. lever ends are coveredwith gi pipe end cap. two nos. of seats are made up of lldpe plastic with inbuilt handle. stand is made up of minimum 80 nb gi b-class pipes. two no of pedestal bearing are given for smooth and noiseless movement of see saw lever. bearing is covered with nylon cover, 2) providing and fixing of deluxe slide as per specifications, 2.1) deluxe slide ae301 structure made of 35mm x 4mm angle iron frame slide: g.i. sheet slide length: 6ft, 3) providing and fixing of kids merry go round as per specifications, 3.1) frp platform merry go round:- product area: minimum 1500 mm diameter. safe play area: minimum 3000 mm diameter. the platform of merry go round made up offibre reinforced plastic. the ring on which the frp platform is based. barcode on machine to show the proper use of machine., 4) providing and fixing of horse rider as per specifications, 4.1) horse rider product area: minimum 900 x 350 mm. safe area: minimum 2700 mm x 950 mm. spring assembly is made up of square plates & compression spring. compression spring is made up of minimum 18 dia wire, spring dia is minimum 200 mm and height is min 300 mm (+10%). stand is made up of minimum 40 nb b class g.i isi mark pipes of reputed make (jindal/bhushan/tata) plate is welded on it to fix plastic bike on it firmly. all welded joints are properly groundedand coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat done by first coat of superior brand primer 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character is made up of lldpe plastic with rotational moulding process which is nonageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is minimum 850 mm long and weight is minimum 7 kgs. it has inbuilt handle and foot rest., 5) providing and fixing of triple swing side as per specifications, 5.1) triple swing, side pipe - 35 mm upper pipe - 50 mm seat - rubber sheet chain - 3 mm.