Get complete information related to latest Intermediate Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Intermediate Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Intermediate Plate Tenders.
Tender For auction sale of pway scrap - scrap rails 60 kgs of sort and sizes including point and xing rail, check rails, tongue rail with or without gluid joint, fish plate, nut bolts, ci and other attachments. note: (1) if any rail of 52kg is found, the same will also be delivered. (2) maximum gross weight allowed at the weighing bridge at the time of delivery will be 40 mts (tolerance of 2% is allowed). (3) one cut is allowed on rails above 7 meters. location: e by 1 near fencing.
Tender For auction sale of pway scrap - iiird class melting scrap material of qty.-73.233 mts of p.way fitting and accessories items of all sorts and size, symmetrical, unsymmetrical complete and incomplete including broken pieces higly rusty and corroded condition, rail pieces 52 kg below 1 mtr. rail pieces 60kg below 1 mtr. glued joint52 kg , glued joint 60 kg , 52 kg joggled fish plate , broken erc mk-iii ( rt-3701), plate screw rt-3911 & 3912 , point & xing ms bolt and nuts tee head & all type point & crossing ms bolt and nuts , leading stretcher bar ( rt-4885 & 4886), ist following stretcher bar 1 :8.5 52 kg , iind following stretcher bar ( rt-4889 & 4890), all type bearing plate , m.s plate , slide chairs rt-5813, slide chairs rt-4735 , leading stretcher bar ( rt-4764 & 4765) ist following stretcher bar , iind following stretcher bar , iiird following stretcher bar , special bearing plate , 90 r rail pieces below 1 mtr. etc. at material available at sse/p.way/s/dd office compound & office behind side.
Tender For auction sale of rolling stock - condemned 11 nos wagon sl no. [1] special repair bcnm1 30069131797, [2] special repair bcnm1 30069160773, [3] er bcnm1 30029160300, [4] er bcnm1 30029160065, [5] ser bcnm1 30079160565, [6] ser bcnm1 30079168493, [7] ser bcnm1 30079161289, [8] wr boxnr 25089600651, [9] cr boxnr 25019660441, [10] er bobrnm1 72029561992, [11] er bcnm1 30029124524. total qty- 11 nos. excluded items of each wagons sl no- 1 to 10 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie - 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos , 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos. (nb- apm not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient of the wagon sl no. 8 & 9). excluded items of wagon sl no- 11 (er-30029124524) are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos , 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve (ci)- 01 no, 12) slack adjuster- 01 no, 13) knuckle- 02 nos, 14) anchor plate with safety plate- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). nb: bogie (02 nos) not included in the excluded items of wagon sl no-11 (er-30029124524) as this wagon is fitted with casnub 22w(m)-bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated-14/11/2019 & this wagon should be sold & disposed with bogies. the wagons will be sold except excluded items mentioned above as per crse/frt/kkk's l/no. mc/300/pt. xx, dt. 10.04.2024. wagons sl no-1 to 10 to be sold without bogies & wagon sl no-11 to be sold with bogies.
Tender For auction sale of rolling stock - condemned wagon no. cncr-98259060449, type- bfkhn. qty- 01 no. excluded items of wagon no bfkhn-cncr-98259060449 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie- 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos, 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) hand brake wheel- 02 nos, 15) knuckle- 02 nos, 16) anchor plate with safety plate- 02 nos, 17) brake beam complete for casnub bogie- 04 nos, 18) equalising lever with bush- 04 nos, 19) bogie brake push rod- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). the wagon will be sold except excluded items mentioned above as per crse/kkk's letter no mc/300/pt.xx, dated- 10.04.2024. wagon to be sold without bogies. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme.
Tender For auction sale of rolling stock - condemned wagon no- cr-30018961543, type- bcnm1. qty- 01 no. excluded items of wagon are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos, 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve- 01 no, 12) slack adjuster- 01 no, 13) hand brake wheel- 02 nos, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos (nb-apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). nb: bogies (02 nos) not included in the excluded items of wagon (cr-30018961543) as this wagon is fitted with casnub 22w(m)-bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated 14/11/2019 & this wagon should be sold & disposed with bogies. the wagon is to be sold except excluded items vide crse/kkk's l/no. mc/300/pt.xx, dt. 10.04.2024. wagons will be sold with bogies. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme.
Tender For auction sale of others - scrap released cast iron (ci) materials consisting of following items sl 01 to 35, 1] ci flushing tank 1 gallon cap, qty=19 nos, 2] ci sluice valve with flange class-ii 300 mm, qty=2 nos, 3] air release valve ci 300 mm, qty=5 nos, 4] air release valve ci 375 mm or 15 inch dia flange, qty=3 nos, 5] ci foot valve 5 inch, qty=2 nos, 6] ci band (df) 12 inch, qty=1 no, 7] ci tee (flange) 4 inch x 4 inch x 3 inch, qty=1 no, 8] ci tee (s/s) 8 inch x 8 inch x 4 inch, qty=4 nos, 9] ci tail pcs (s/s) 14 inch x 2 foot 0 inch, qty=2 nos, 10] non-return valve 12 inch, qty=3 nos, 11] ci tail pcs (s/s) 6 inch x 10 inch, qty=1 no, 12] non-return valve 2 and half x 1 and half, qty=1 no, 13] ci rw shoe 4 inch, qty=48 nos, 14] ci tee 8 inch x 8 inch x 6 inch s/s, qty=1 no, 15] sanitary fittings air valve with mica flange, qty=15 nos, 16] 6 inch dia distance pice, qty=1 no, 17] cirwof sets 6 inch, qty=6 nos, 18] ci tail picec f/socket 15 inch, qty=1 no, 19] cirw socket 3 inch, qty=11 nos, 20] ci bend d/f-9 inch, qty=1 no, 21] h.c.i single junction with door at back 4 inch dia, qty=15 nos, 22] ci bend 14 inch (s/s), qty=2 nos, 23] h.c.i. plain double junction 4 inch, qty=12 nos, 24] c.i.r double branch plain junction 4 inch, qty=16 nos, 25] h.c.i. trap extension pice and granting plain 4 inch, qty=16 nos, 26] ci tapper 7 inch x 6 inch (s/s), qty=1 no, 27] c.i. tapper (s/s) 8 inch x 10 inch, qty=1 no, 28] c.i. pipe (reducing tapper) 15 inch x 8 inch (df), qty=3 nos, 29] c.i. tapper (df) 10 inch x 6 inch, qty=1 no, 30] c.i. bend (s/s) 3 inch x 90 inch, qty=88 nos, 31] c.i. cross 8 inch fixed junction, qty=8 nos, 32] c.i. spl. hanged pipe 6 inch with flanged 3 foot 4 inch, qty=8 nos, 33] c.i. ashpit pipe 6 inch 3 centimeter-4 inch, qty=15 nos, 34] c.i. tee with branch flange 12 inch x 12 inch x 3 inch, qty=1 no, 35] c.i. vertical corner plate (scrap), qty=9 nos.