Latest internet cable Tenders | Government internet cable Tenders

CTN :45507058

20 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of epson multifunction ink tank printer 4 ink bottle included , internet cable cat 6 , power cable for monitor , power cable for cpu , vga cable 15 pin

CTN :45475408

22 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For rate contract for supply of electric material(ht/lt) t&p/equipments/hardware items etc.for std udhampur -balance items. note :the bidders are advised to quote the reasonable rates for supply of all the items mentioned in boq. any rate quoted as zero shall be assumed that the firm is unwilling to supply the particular item and next lowest rate shall be considered as l1 for that particular item. - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, 11 kv single-core xlpe armoured cable 630 mm2, 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), 33 kv cable termination kits heat shrinkable 300 sqmm -3 core, 33 kv cable termination kits heat shrinkable 240 sqmm -3 core, 33 kv cable termination kits heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a)cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, 11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, 11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable, a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & battery bank , maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, 32 v battery charger automatic (float & boost) compatible for vrla batteries, 3 phase, 415 v ac , 50 hz ,4 wire 36 v , 30-40 a, with 4 outgoing feeders and with all protections, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification , 33 kv post insulator 24 mm, 11 kv guy insulator 90 x 65, 33 kv hardware fittings, 33 kv tension fittings for acsr dog conductor, t & c 3 u-bolts type (approx. 2.8 kg) al wt 400 gm, 33 kv suspension fittings for acsr dog conductor -( wt 1.8 kg), spares for 11 kv vcb panels, a) male / female contacts mei make, b) 11 kv pt fuse, c) 11 kv vcb bottle assembly bracket, d) shower contact mei make, e) shower contact crompton greaves make, spring charging dc motor for 11 kv vcb panel( make delco), tripping coil suitable for vcb panels (operating voltage 30-36 volt dc) with plunger, ampere meter 96mm x 96 mm for 11 kv vcb panel (digital), voltmeter 96mm x 96 mm for 11 kv vcb panel (digital), indicator lamp for vcb panel voltage 50-250 v ac/dc., tnc switch for 11 kv/ 33kv vcb panels, space heaters with thermostat for 11 kv vcb panels, 11 kv vacuum interupter bottle with makes, a) g.e., b) crompton greaves, c) allind, d) alstrom, e) bhel /a.b.b, master trip relay ashida (make) 18-52 (v), 11 kv cts resin cast of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv vcb panels(indoor/outdoor), i) 800/400/

CTN :45446757

22 Jun, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :45445126

25 Jun, 2026 NA

Hisar - Haryana

Tender For expression of interest (eoi) from any reputed manufacturers for budgetary quotations for supply of electrical equipment materials within the jurisdiction of dhbvnl on for destination basis- heat shrinkable termination kit for 11 kv xlpe cable (outdoor type) , 3cx50mm2 , 3cx95mm2 , 3cx120mm2 , 3cx185mm2 , 3cx300mm2 , 3cx400mm2 , scx630mm2 , heat shrinkable termination kit for 11 kv xlpe cable (indoor type) , 3cx50mm2 , 3cx95mm2 , 3cx120mm2 , 3cx185mm2 , 3cx300mm2 , 3cx400mm2 , scx630mm2 , 11 kv 3/c cable heat shrink type straight through joint of sizes , 3/cx50mm2 cable , 3/cx95mm2 cable , 3/cx120mm2 cable , 3/cx185mm2 cable , 3/cx300mm2 cable , 3/cx400mm2 cable , s/cx630mm2 cable , sleeve , sleeve, 11 kv insulated medium voltage line cover (mvlc) for acsr conductor (sleeve) suitable for size upto 100 mm2 as per nigam's technical specification /relevant iss and latest amendments thereof , un-armoured copper control cable , 2c x 4mm2 , 2c x 6mm2 , 3c x 4mm2 , 4c x 4mm2 , 6c x 4mm2 , 7c x 2.5mm2 , 10c x 2.5mm2 , lt xlpe armoured cable , lt xlpe mm2 cable un-armored 1c*300 , lt xlpe armoured 2c*16 mm2 cable , 33 kv ht tr-xlpe cable , 3/c 300mm2 , 3/cx400mm2 , 11 kv h.t. tr-xlpe cables , 11 kv 3c*400 mm2 tr-xlpe armoured cable(hdpe extruded cable duct) co- , 11 kv 3c*300 mm2 tr-xlpe armoured cable(hdpe extruded cable duct) co-, , 11 kv 3c*185 mm2 tr-xlpe armoured cable(hdpe co-extruded cable duct), , lt feeder panel and lt switchgear, , 400 amps acb, 4 pole, manual operated, fixed type with enclosure, , 200 amps mccb with enclosure, , 100 amps mccb with enclosure, , 7 way distribution feeder panel with 2 nos. mccbs, 4 pole, 3phase, 415 v, 400 amps for incoming and 5 nos. outgoing mccbs 4 pole, 3phase, 415 v, 100 amps rating type suitable for outdoor installation, in accordance with technical specification (type-d), , 33 kv rmus, , outdoor type 33 kv sf6 type extensible and motorized 5 way rmu (2lbs+3vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts, , outdoor type 33 kv sf6 type extensible and motorized 5 way, , outdoor type 33 kv sf6 type extensible and motorized 4 way rmu (2lbs+2vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 4 way rmu (2lbs+2vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (2lbs+1vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (2lbs+1vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (1lbs+2vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (1lbs+2vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (3lbs) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (3lbs) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) with the provision, , of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) as per ts. (both side extensible), , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (1lbs+1vcb) with fpi as p

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

CTN :45421995

18 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of lt panel consisting with 4-pole draw out acb 1000a, 50ka, microprocessor based sr18g, mdo type-02 nos as incoming, acb 1000a, 50ka, microprocessor based sr18g, drawout type-01 nos as bus coupler with 4 pole 400a 50-56ka microprocessor based mccb-05 nos, 4 pole 250 a 36-37ka microprocessor based mccb-05 nos and 4 pole 100a 25ka microprocessor based mccb-02 nos as outgoing with suitablecu. busbar metering voltmeter, ammeter, energy meter on incoming side and ammeter with selector switch, hrc back up fuse in outgoing side and protective circuit & sheet steel enclosure, appropriate spreader kink for mccb and mechanical/electrical interlocking for acb with necessary item for seal the cable entry andoutgoing point. ]

CTN :45418039

03 Jul, 2026 11.81 Lacs

Gwalior - Madhya Pradesh

Tender For providing, supplying of repairing material.file.58/26x6/4. - supplying and fixing asper specification bakelite holder/angle holder ofapproved make with necessary materials complete, 6 amp 250 volt 3 pin, 16 amp 250 volt pin, supplying and fixing of approved make modular type pvc box minimum depth 40mm and minimum thickness 2mm withmodular base and cover plate including fixing on surface etc. as required for:- 3 module pvc box, supplying and fixing of approved make modular type pvc box minimum depth 40mm and minimum thickness 2mm withmodular base and cover plate including fixing on surface etc. as required for:- 6 module pvc box, supply and fixing as per specification switch of approved make isi marked with necessary material complete. 6/10amp sp 250 volt modular switch, supply and fixing as per specification switch of approved make isi marked with necessary material complete.16/20amp sp 250 volt modular switch, supply and fixing as per specification socket outlet of approved make & isi marked with necessary material complete 6/10/16/20amp 250 volt 3 pin modular type (250 -6 amp, 250-16 amp), 7.1suppyling of isi marked switch fuseunit (rewirabletype) triplepole with neutral link ,415 volt having conduit/cable glandentry with two earthing terminals confirming to is:13947(parti& iii) .200 amp., supplying of isi marked and accepted standard of miniature circuit breaker (mcb) ofcseries suitable for 240/415 volts, 50 cycle,10 ka valueac supply confirming tois:8828:1996,iec:60898:2002 but without enclosures :- single pole (sp) 6 amp to 32 amp rating, supplying of isi marked and accepted standard of miniature circuit breaker (mcb) ofcseries suitable for 240/415 volts, 50 cycle,10 ka valueac supply confirming tois:8828:1996,iec:60898:2002 but without enclosures :- double pole (dp) 6 amp to 32 amp rating, supplying of isi marked and accepted standard of miniature circuit breaker (mcb) ofcseries suitable for 240/415 volts, 50 cycle,10 ka valueac supply confirming tois:8828:1996,iec:60898:2002 but without enclosures :- for triple pole & neutral(tpn) 50 amp to 63 amp rating, supplying of approved make,powder coated vertical tpn mcb db metal double door with mccb 100atp10ka as incomer and space for sp/tp mcbs as outgoing (withoutmcbs)inclusive ofbusbar &connections etc without mcb: 4 way with mccb, supplying,fixing and testing of mpp condensor of approved make asrequired as per specification2.5 mfd., supplying,fixing and testing of mpp condensor of approved make asrequired as per specification3.15 mfd., supplying fixing and testing of approved and suitable make led driver for an existing led luminary panel. led luminiare 1x1, 24w panel driver, supplying fixing and testing of approved and suitable make led driver for an existing led luminary panel. led luminiare 2x2, 36w panel driver, supplying,fixing and testing of flourescent tuberod isi marked of approved make as required as per specification 4 x 36 watt, supplying of isi marked change over switches in sheet enclosureconfirming to is : 4064 / is : 13947 (part i & iii ) with side handle operated 4 pole with two earthing terminals 300 amps. 415/500 volts. (off load ), supply and fixing of approved make step type modular electronic fan regulator including connection etc. as requiredon existing board 100 watt (1 module), supply and fixing of approved make step type modular electronic fan regulator including connection etc. as requiredon existing board 100 watt (2 module), alluminium wire 2.5mm isi marked roll of standard length (1 coil=90 m) rate- 400, pidlite steelgrip 1.80 cm x6.5 mx.125 mm pvc electrical insulation tape make steelgrip, supply of extension box with one 5amp. pin and one 16 amp socket with 2 switches

Central Government/Public Sector

CTN :45391523

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply, installation, testing and commissioning of 8way ip 54 rated vertical double door tpnmcb db ,a) 1 nos. of 200a, 36ka, fp, mccb as incomer, b) 3 nos. of 32a, 18ka, tp mcb and 6 nos. of 6a, sp, mcb and 9 nos. of 16a, sp, mcbs as outgoing, cable adapter with standard specifications. preferred make; l&t, c&s, havells, abb, or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45048307

30 Jun, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

State Government

CTN :45359840

15 Jun, 2026 10.46 Lacs

Midnapore - West Bengal

Tender For construction of new 11kv out going power cable trench, loops, renovation and height upliftment of existing outgoing trench and loops and tit bit other civil works at old nimpura 33/11 kv sub-station under kharagpur division in paschim medinipur regio

Internet Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government