Web Analytics Made Easy - StatCounter

Intravenous Cannula Tenders

Get complete information related to latest Intravenous Cannula Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Intravenous Cannula Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Intravenous Cannula Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45499760 Due date: 24 Jun, 202624 Jun, 2026 27.45 Lacs
Tender For providing developmental works in yelurivaripalem (v) of chimkaurthy mandal package (4 works) - shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders. , scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges.

CTN :45499765 Due date: 24 Jun, 202624 Jun, 2026 22.82 Lacs
Tender For providing developmental works in ramachandrapuram (v) of chimkaurthy mandal package (3 works) -earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , filling in foundation with stone dust trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth ,plain cement concrete (1:4:8) prop using 40mm size hbg (ss5) metal including cost and conveyance of all materials and curing charges but including unskilled wages etc., complete for finished item of work for foundations and flooring bed (apss no. 402)(cssr) , rcc m- 20 nominal mix (cement:fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for footing ,rcc m- 20 nominal mix (cement:fine aggregate: coarse aggregate) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for columns.

CTN :45499769 Due date: 24 Jun, 202624 Jun, 2026 17.57 Lacs
Tender For providing developmental works in pulikonda (v) of chimkaurthy mandal package 2 (3 works.) - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord, construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges., construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord, shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders., earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth

CTN :45499776 Due date: 24 Jun, 202624 Jun, 2026 20.60 Lacs
Tender For providing developmental works in rangasaipuram village gadiparthivaripalem gp of chimakurthy (m) package 1 (4 works) - construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth . scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord . shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders.

CTN :45499777 Due date: 24 Jun, 202624 Jun, 2026 13.75 Lacs
Tender For providing developmental works in rangasaipuram village gadiparthivaripalem gp of chimakurthy (m) package 2 (3 works) - shoulders are filling the selected earth for levelling the site as per drawing and technical specification clause 305.3.9 mord & 304 morth but excluding gst & seigniorage charges. for shoulders. , scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges.

CTN :45498830 Due date: 01 Jul, 202601 Jul, 2026 19.33 Lacs
Tender For supply of threaded sizes from 10mm 75 mm at increment of 2mm , cannulated screw 4 point 5mm self tapping fully threaded sizes from 10mm 75 mm at increment of 5mm , cannulated cancellous screws dia 6 point 5 mm fully threaded from length 35 mm to 80 mm at intervals of 5 mm with washer ti 316l ss , cannulated cancellous screws dia 6 point 5 mm with 32 mm threading from length 35 mm , threaded kirschner wire 20 cm long into 1mm 1 point 5mm 2mm 2 point 5mm 3mm , pro into imal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws , distal radius volar locking plate complete construct with 6 locking and 3 cortical screws titanium , ilizarov fi into ator frame complete set fordeformity correction tibia adult consisting of 10 into 160 mm , pro into imal tibial lateral periarticular locking plate system left or right , pro into imal medial tibial locking plate system left or right complete construct , anterolatereal distal tibial periarticular plate system left or right complete construct , sterile disposable u drape with tube holders 80 into 124 4 into 44 split compliant , disposable leg o u drape bis us fda eu ce full quality assurance , disposable screen cover and trolley cover bis us fda eu ce full quality assurance , synthetic bone graft wedges sterile packed point usfda and ce approved point , post op dressing non woven non adherent with wound pad 5 into 7 point 2 cm 2 into 3 inches , post op dressing non woven non adherent with wound pad 8 into 15 cm , post op dressing non woven non adherent with wound pad 10 into 20 cm , post op dressing non woven non adherent with wound pad 10 into 25 cm , paraffin gauze dressing with antibiotic 10 , orthopedic tear resistant gloves different sizes size 7 or 7 point , ilizarov fi into ator frame complete set for deformity correction femur adult consisting , single use c arm cover pair sterile packed waterproof material point should be compatable with all model c arm point , cling drape film roll sterile transparent point , vertical isolation drape sterile for hip surgery , sterile disposable universal e into tremity drape with conforming circular fenestration tube holders , disposable o drape , drill bits solid 2 point 5 mm , drill bits solid 3 point 2 mm , drill bits solid 3 point 5 mm , drill bits solid 4 point 5 mm , cement gun for cement injection , high viscosity bone cement with antibiotic 40 gm , low viscosity bone cement with antibiotic 40 gm , reconstruction cephallomedullary nail femur complete construct with 02 cephalic lag , uncemented modular radial head prosthesis with modular radial head modular fluted stem //bid details 2 / 45

CTN :45344079 Due date: 18 Jun, 202618 Jun, 2026 NA
Tender For corrigendum : e- 285/mmgpa/ surgical dressing material

CTN :45499694 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For supply of plain glass sheet 6 feetx4 feet x 4mm , plate rack stainless steel 31inch x 24 inch x 10 , bitumen tape 85x25 50kg bag , low level cistern pvc 10 ltr cap , hydraulic door closer cast iron non porous body single speed , cp heatlh faucet set 1.5m tube with hook , pbs tarfelt roll , bath room corner glass shelves 9inch , pu bag 10ltr pack , bitumen tape 4x10mtr , cp toilet paper holder , bitumen pothhole tramix premix , float valve ptmt 20 mm , cp shower with arm 75mm , pvc connection pipe with cp nuts 18inch , looking mirror 600mmx450mmx5mm thick glass , cp towel rack 600 mm , float valve pvc 15mm , bath room glass shelves 18inch , bathroom mirror cabinet of size 522mm x 350mm , union gi 15 mm , soap dish ss of size 5 inch x4 inch , bath room corner glass shelves 24inch , pvc connection pipe with cp nuts 24inch , pvc connection pipe with cp nuts 12inch , bath room corner glass shelves 12inch , pvc water storage tank 1000 ltr capacity , plastic seat cover for wc white , pvc water storage tank 500 ltr capacity , cp telephonic shower with 1.5 mtrs tube , gi tubing15 mm , pvc waste pipe flexible 40mm x 800 mm , multi polyplus 1mtr x 20 mtr length x 0.80 mm upto 2 mm , bitumen felt sheet , helical door spring size 150 mm , galvanised steel wire cloth 0.45 to 0.5mm nominal dia of wire , permanent cold patch material packed in 25 kg poly bag , cp hand shower 1.5m tube with hook , gi socket 20mm , pvc waste pipe flexible 32mm x 800 mm , sliding door bolt 200mm aluminium , gi nipple 20 x 100mm , looking mirror 48 inch x 15 inch x5mm for table dressing , gi elbow 15mm , cp urinal spreader 15mm , gi socket 15mm , ply wood commercial bwr of size 8 feet x 4 feet x6mm thick , gi elbow 20mm , sliding door bolt 300mm ms , paint road marking white , gi union 25 mm , end plug 15mm , shelf acrylic 13 inch long 4 inch width size with 6 nos brush , gi tank nipple 20 mm , ptmt toilet paper holder , bow handle aluminium 150mm , sliding door bolt 250mm aluminium //bid details 2 / 46

CTN :45498266 Due date: 20 Jun, 202620 Jun, 2026 NA
Tender For supply of spironolactone 25 mg tab , rifaximin 550 mg cap , octreotide 0 point 1mg per ml inj , zoledronic acid 4 mg powder for inj , 5 amino salicylic acid sr 1 point 2 g tab , secnidazole 1 gm tab , hydrocortisone 20mg tab , misoprostrol 25 mcg, tab , gentamycin sulphate inj im and iv 40mg per ml 2 ml inj , metronidazole inj for iv use containing 500 mg per bott of 100 ml , prednisolone 20 mg tab , vancomycin cp 500 mg inj , thyroxine sodium 0 point 1mg tab , calcium phosphate 0 point 24 mg per 5 ml syp , calcium polystyrene sulfonate powder sachet of 15gm , erythropoietin recombinant human 4000 iu , protein supplement for renal patients on hemodialysis capd 400gm , chloramphenicol 0 point 5 per plus dexamethasone sodium 0 point 1 per bott of 5 ml , flurbiprofen sodium ophthalmic soln 0 point 03 per vial of 5 ml , ketorolac tromethamine 0 pont 4 per eye drops , carboxy methyl cellulose 1 per eye drop bott of 10 ml , syp diphenhydramine 10 to 15 mg per 5 ml and ammonium chloride 100 to 150 mg sodium citrate 50 to 85 mg per 5 ml bottle of 100 ml , cefixime syp 50 mg per 5ml bott of 30 ml , midazolam nasal spray 0 point 5 mg per spray 5 ml bottle , cyproheptadine hcl 2 mg per 5 ml bott of 100 ml , syrup calcium phosphate 80 mg per 5 ml 200 ml bottle , tab isoniazid 60 mg plus rifampicin 60 mg , tab dispersable isoniazid 60 mg plus rifampicin 60 mg plus pyrazinamide 150 mg , methyl phenidate hydrochloride er 36 mg tab , nortriptyline 25 mg tab , acamprosate 333 mg tab , etophylline 115 mg and theophylline 35 mg in slow release form tab , tiotropium bromide 18 mcg and formoterol 12 mcg dry powder cap , vitamin e 200 mg cap , fluticasone propionate inhaler for adults 125 mcg per dose , glucosamine 500 mg tab , rivaroxaban 15 mg tab , mapleson non rebreathing system bain circuit , inj benzathine penicillin 1200000 i u vial , catheter foleys silicon 2 way 5 ml size 16fg , knife bard parker blade size 2 fitting commercial no 20 packet of 6 , adhesive plaster micro porous tape 1 inch box of 12 , adhesive plaster micro porous tape 2 inches box of 6 , adhesive plaster micro porous tape 3 inches box of 4 , dressing medicated adhesive 25 cm x 6 cm in a single strip pack , dressing medicated gauze paraffin 10 cm x 10 cm tin of 24 , dressing wound care 10 cm x 10 cm box of 5 , dressing collagen wound management material 5 ml , gauze absorbent folded 1 cm x 100 metres , gauze absorbent folded 2 point 5 cm x 100 metres , serum anti human globulin , glucose solution 5 per in non toxic disposable plastic bott of 1000 ml ffs technology , sodium chloride solution isotonic in nontoxic disposable plastic bottle of 1000 ml ffs technology , disposable nebulizer mouth piece mask channel tube and cup , pigtail catheter drainage set , post operative waterproof flexible or conformable dressing 10 x 15 cm , promethazine syp 5 mg per 5 ml bott of 60 ml , chloroquine phosphate syp containing 50 mg base per 5ml bottle of 60 ml , benzocaine 20 percent pectin based oral ointment tube of 5 gm , cetrimide powder , erythromycin 4 per gel tube of 20 gm , sisomicin sulphate skin cream 0 point 10 per tube of 7 point 5 gms , tacrolimus oint 0 point 03 per 20 gm tube , roxithromycin 50mg per 5ml syp in bott of 30 ml , amoxycillin 250 mg plus clavulanic acid 50 mg 300 mg inj , cefuroxime 750 mg per vial inj , cefuroxime susp 125 mg per 5 ml bott of 30 ml , acyclovir syp 400 mg per 5 ml , dressing shell compressed , dydrogesterone 10mg tab midazolam 5 mg, 1 ml inj, paracetamol 150 mg/ml, 2 ml iv, inj, morphine 15 mg, 1 ml inj, tizanidine 2 mg + ibuprofen //bid details 2 / 79

CTN :45498780 Due date: 22 Jun, 202622 Jun, 2026 3.90 Lacs
Tender For supply of files stainless steel size no 25 length 25 mm set of 06 , k files stainless steel size no 30 length 21 mm set of 06 , k files stainless steel size no 30 length 25 mm set of 06 , k files stainless steel size no 15 to 40 length 25 mm set of 06 , hand rotary niti file assorted 21 mm , niti files 15 to 40 25 mm , plugger spreaders 15 to 40 , formacresol solution , metapex calcium hydroxide root canal dressing , gic type ii cement , cotton wool absorbent pkt of 500 gm , gauze absorbent folded ribbon reel , cotton roll absorbent , pad cotton wool dental box of 100 , pad abdominal swab , kalsogen powder and liquid , endo access burs kit , endo z burs kit , bur diamond round pkt of 5 , bur diamond inverted cone pkt of 5 , bur diamond straight fissure pkt of 5 , g p cloth pkt of 100 , lignocaine spray anaesthetic surface bott of 100 ml , mta based root canal sealer pack of 2 to 3 gm , caoh based root canal sealer paste , sterile suture 3 by 0 silk 1 by 2 circle cutting needles , normal saline bott , 3m ketak molar glass ionomer cement , cidex bott of 5 ltr , mmr miracle mix material , saliva ejector suction tips , plastic wedges , pulpryl d pulp , pmt set ss gdc , articulating paper of 12 book , gic type ix cement , disposable gown for ot , paper point absorbent root canal assorted box of 6 , gutta purcha point germicidal assorted box of 100 15 to 40 , hyflex rotary files 6 percent assorted size 21 mm , hyflex rotary files 6 percent assorted size 25 mm , dental napkin box of 100 , bur straight fissure cross cut tc for straight hand piece , abrasive white acrylic bur w3 for straight hand piece , diamond bur cylindrical 835 by 014 for airotor hand piece , syringe hypodermic cartridge type needle 35 mm long pkt of 100 , barbed broaches set of 10 to 12 , etchant tube , dologel tube , desensitizing paste icpa , gloves sterile operating size 6 point 5 , examination gloves size medium , examination gloves size small , nitrile non sterile gloves size medium , patient drapes , hemostatic sponge gelatin gel foam , denture cleaning tablet , denture adhesive powder fixon , prophylactic paste polishing , polishing cups , calcium hydroxide powder or paste , periodontal co pack gc , disposable rvg sensor sleeves , sterillium bott of 500 ml //bid details 2 / 74
 Loading, Please wait...

Connect us via What's Up