Tender For supply of procurement of sealed maintenance free lead acid battery 2v 300 ah capacity consisting of 54/52 no's of 2 volt cell each with additional acc essories for ac emu rake maintenance at emu carshed virar as per rdso spec. no-rdso/ pe/ spec/ac/0009-2014 (rev-2). [ warranty period: 30 month s after the date of delivery ]
Tender For supply of low maintenance lead acid stationary secondary cell 2volt 80 ah with hard rubber co ntainer / poly propylene (ppcp) container accessories inter- cell connectors with nut, bolt and washers microporous ceramic vent plug in dry & uncharged conditions, conforming to rdso specification irs:s - 88/2004 ver 1.0 or with latest amdt if any, without maintenance tool kit. [ warranty period: 36 month s after the date of delivery ]
Tender For corrigendum : procurement of consumables/non-consumables for the department of biomedical engineering division - consumables and non-consumables requirement, electrical insulation tape (black color), power cord : power cord should be approved by regulatory body such as iec/url/bis and comply indian plug type d/m, male and female metal connectors for nibp hose to cuff conection (pack size-one set), male and female connectors for nibp hose to cuff conection compatible for ge 350 model(pack size-one set), male and female connectors for nibp hose to cuff conection compatible for nihon kodhen vismo model. (pack size-one set), plug top 16 amps, plug top 6 amps, ventilator (humidifier) consumable - heater wire adaptor with dual cable comaptible for adult disposable circuit to fit in fischer and paykel mr 850/nice neotech humidifier, ventilator (humidifier) consumable - temperature/flow sensor with minimum length of 150cm compatible for adult disposable circuit to fit in fischer and paykel mr 850/nice neotech humidifier, adult flow sensor for bel cv200/ hamilton c3 ventilator, oxygen cell compatible for wipro ge ventilator model. sle5000, oxygen cell compatible for maquet ventilator, oxygen cell compatible for schiller graphnet ventilator, oxygen cell compatible for bellavista/galileo gold ventilator, oxygen cell compatible for puritan bennett pb840 model, battery for defibrillator - rechargeable lead acid battery 10v, 2.5ah compatible for zoll m series defibrillator, battery for defibrillator - rechargebale 10.8 v lithium ion 5.8ah battery compatible for zoll m2 series defibrillator, battery for defibrillator - rechargeable ni-mh battery 12v 2800mah compatible for nihon kodhen tec 5500 series defibrillator, battery for syringe pump - rechargeable battery ni-mh battery 6 v - 1,8 ah compatible for fresenius agilia syringe pump, battery for syringe pump - rechargeable battery ni-mh battery 6 v - 1,8 ah compatible for fresenius infusia sp 7s syringe pump, battery for infusion pump- rechargeable battery ni-mh battery 6 v - ah compatible for fresenius model: optima, battery for syringe pump - rechargeable ni-mh battery 8.4v 1.3ahr compatible for plenumtek zion plus syringe pump, battery for syringe pump - rechargeable lithium battery 11.1v compatible for comen m200a syringe pump, reusable 3 lead ecg cable(adult) for spacelabs monitor, reusable 3 lead ecg cable(adult) for vismo model (nihon kodhen), reusable 3 lead ecg cable (adult) compatible for ssmed monitors(model:max 66), reusable 5 lead ecg cable (adult) compatible for ssmed monitors(model:max 66), reusable 3 lead ecg cable (adult) compatible for philips goldway monitors, reusable 5 lead ecg cable (infant) compatible for ssmed monitors(model:max 66), reusable 3 lead ecg cable (adult) compatible for meditech england (model: meditech england ), reusable 3 lead ecg cable (infant) compatible for meditech england (model: meditech england ), reusable 3 lead ecg cable compatible for bpl monitors (model: ultima prime ), reusable 3 lead ecg cable compatible for skanray monitors (model: truskan s600 ), ecg cable compatible for slim 50 model(ocean make), 3 lead ecg cable compatible for risian model, 3 lead ecg cable compatible for riransa model, ecg cable for komed model, ecg cable for star 55, ecg cable for bpl monitor, reusable nibp hose compatible for philips mp series, reusable nibp cuff (double hose) compatible for ge monitor, reusable nibp cuff (single hose) compatible for multipara monitors, reusable nibp hose compatible for vismo model(nihon kodhen), reusable nibp hose compatible for schiller truscope model, reusable nibp hose compatible for komed model, reusable nibp hose compatible for ge carescape model, reusable nibp hose compatible for risian model, reusable nibp hose compatible for vistaview model, reusable nibp hose compatible for riransa model, reusable nibp hose compatible for truskan monitors, reusable nibp hose compatible for ss med monitor/comed/criticare, reusable nibp hose
Tender For corrigendum : supply of 360 v, 2110 ah, hdp tubular in san container lead acid batteries including installation and commissioning and removal of old battery banks , hdp tubular in san container , type test for 2110 ah hdp tubularbattery , seismic test for 360 v 2110 ah hdp tubular , inter-cell connectors , inter stand connectors , inter row connectors , inter row connectors between two stands , vent plugs , end take off connector assembly , electrolyte , cell containers with lids , insulated shrouds , petroleum jelly , syringes , filler hole thermometer , funnels , jugs , rubber aprons , rubber gloves , shoe cover , cell lifting straps , face mask , safety goggles , torque wrench , siphon
Tender For procurement of lab equipments for quality control lab of no.1 hrbhlc subdivision q.c channarayapatna - supply, installation, testing and commissioning specific gravity bottle-100ml conforming to is2386 mis-401-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 3.35mm , item code aim-05304 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item code aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, specimen size 100mm & 150mm cube, 100mm dia x 150mm dia cylinder, one electric motor, single phase 220v, 50hz, ac supply digital display, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 90 microns, item code aim-05325 with all lead and lift complete as per directions of the engineer-in-charge of work. , supply, installation, testing and commissioning heating gloves item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and universal automatic compactor aim-11001-ms ,compaction mould 100mm id, 127.3mm height 1000ml volume,complete with collar and base plate, made of mild steel and aim-11101-ms - compaction mould 150mm id, 127.3mm height 2250ml volume, rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight, drop - adjustable to 310mm or 450mm.with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and commissioning digital laboratory california bearing ratio test apparatus , as per is2720 (part xvi). suitable for operation on 220v, 50hz, single phase, ac supply,digital indicator. no of channels - 2 nos, load cell , capacity - 50 kn compression type, maximum overload -110% of the rated capacity, item code aim-121-4-ms with all lead and lift complete as per directions of the engineer-in-charge of work, supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. cylindrical core cutter, made of steel 100mm dia x 130mm long, steel dolly, 25mm high and 100mm dia rammer with steel rod item code aim-161 with al
Tender For supply of "lead acid low maintenance stationery secondery cell 2v,300ah capacity at 10 hrs. rate of discharge, assembled with tubular positive and pasted negative plates in hard rubber container with microporous vent plug, lead coated inter cell connector, nuts, bolts and washer in dry uncharged conditio n as per irs specification no.-s-88-2004 with latest amendments/version." [ warranty period: 30 mont hs after the date of delivery ]