Latest iron ore handling plant Tenders | Government iron ore handling plant Tenders

State Government

CTN :44398869

14 May, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of operation and maintenance power house / power plant - work for hiring of 9 to 20 ton mobile hydra crane as and when required for material handling work on rate contract for 18 months at gsecl gtps

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

CTN :45045461

15 May, 2026 NA

Netanar - Chhattisgarh

Tender For providing of operation and maintenance of other machines and plants - providing services of 1 number tipper/dumper for the handling as well as shifting of raw material to specified location within plant premises and providing services of 1 number tractor with tan..

Central Government/Public Sector

CTN :44454811

27 Apr, 2026 NA

Burnpur - West Bengal

Tender For bid to ras providing of custom bid for services - operational job contract for wtp of wrbm and furnace pump house (wrm bm & usm) including all associated jobs related to assistance in operating monitoring of plant equipments tank cleaning material handling and technologica..

CTN :44804667

08 May, 2026 75.27 Crore

Gwalior - Madhya Pradesh

Tender For corrigendum : development of a municipal solid waste processing facility in design built finance operate and transfer (on ppp model) which include waste to bio-gas plant and mrf faclity at gwalior municipal corporation on a public private partnership basis 5th cal - development and operation of bio methanation facility suitable for processing municipal wet waste of 350 tpd and material recovery facility (mrf) suitable for processing dry municipal waste of 277 tpd at kedarpur gwalior (m.p.) on design, build, finance operate and transfer model including survey, investigation, design and preparation of drawings and execution of all related tasks complete in all respect including obtaining all applicable permits for establishment, execution and operation of project from the concerned agency/authority.above project facilities shall be capable of handling waste up-to 150% of designed capacity. after completion of all project works operation period is 20 years

Central Government And Public Sector

CTN :44970800

21 May, 2026 2.92 Crore

Damanjodi - Odisha

Tender For providing of custom bid for services - product/raw material handling and related jobs at sgh (special grade hydrate) main plant and pilot plant of alumina refinery, nalco, damanjodi

corporations/Associations/Others

CTN :44959254

07 May, 2026 86.86 Lacs

Bardhaman - West Bengal

Tender For tender for supply of description of the material, liner, eqp-2"x3" wide clinker grinder part no-553-016, wetting head tail pipe, part no:wht-01 for wetting head, make indur, 11.2 b.8 standard chart for center grinder, bearing support (1 bet of 2 nos) of 2x3 wide clinker grinder, part no-552-010-01, make-indure, for 600 mw, ash, handling planto, gland half, eqp-2x3 wide clinker grinder assy, part no-552-011-02, driving shaft assy with grinding rolleqp-2x3 wide clinker grinder assy part no-a-553-302&953-015, driven shaft assy with grinding roll, eqp-2x3 wide clinker grinder assy part no-a-553-303 & 553-015, wear plate eqp-2x3 wide clinker grinder assy,part no-562-014, driving sprocket 12 teeth, eqp-2x3 wide clinker grinder assy, driven sprocket 42 teeth eqf-2x3 wide clinker grinder assy, door guide rail left). eqp-900x900 inclined feed gate assy for ba hopper part no-547-308l, door guide rail(right) eqp-900x900 inclined feed gate assy. for ba hopper part no-547-306r, roller axel, eqp-900x900 inclined feed gate absy for ba hopper, part no-542-019-00, 7 dia inspection window assy, eqp-bottom ash system part no-a-537, housing (m5 10mm thick 18:2062, 10 mm), part no-553-301 for 2003 wide clinker grinder, make indure, 15x915 inclined feed gate housing-removable panel, make indure part no-547-302 for 600 mw, ash handling plant, 15x915 inclined hied gate housing-door, make-indure, part no 547-011 for 900 mw, ash handling planto, lock nut, eqp-2x3 wide clinker grinder assy part no-km-14, 15x915 inclined feed gate housing-600 mm dia access door assy part no-a-526, make-indure, for 600mw, ash handling planto, 915x915 incined feed gate housing-wear plate, make-indure, part no-547-014, for 500 mw, ash handling plant, 915x915 inclined feed gate housing-impingment plate, part no-543 013/14, make-indure, for 600 mw ash handling planto, 915x915 inclined feed gate housing-pedestal, part co-547-015, make indure, for 600 mw, abh handling planto, 300 nb manually chain optd knife gate valve valve body part no-172x-017, make-indure, for 600 mw, ash handling planto

Central Government/Public Sector

CTN :44947084

11 May, 2026 NA

Surat - Gujarat

Tender For providing of custom bid for services - job contract for material handling and maintenance of stores at ongc, hazira plant for three years

State Government

CTN :44924949

08 May, 2026 NA

Gandhinagar - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work of removing handling any extraneous material big lumps etc from various running conveyor belts while handling unwash coal in chp at gandhinaga..

CTN :44891328

30 Apr, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous works in thermal-2 - miscellaneous works in thermal-2, the work shall be carried out on a manday basis and includes collection, segregation, and shifting of metallic and non-metallic waste materials from the thermal-2 building premises. the activities cover handling of rusted metallic items, structural scrap, insulation materials, oil sludge/oil slick, mud, debris, and other miscellaneous scrap lying at various locations such as the ground floor near boiler area, pipe rack area, tg floor area, cooling tower area, and other surrounding premises. the work also includes bringing down waste materials from different floors of boiler units 1, 2, and 3 to ground level and consolidating them at a designated location. all manpower, tools, tackles, and equipment shall be provided by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be executed on a manday basis and includes loading and unloading of segregated metallic and non-metallic scrap/waste materials within the fact ud / petro plant premises as directed by the engineer-in-charge. all required manpower, tools, tackles, and handling equipment including concrete lump breakers shall be arranged by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., transportation of scrap and waste materials loaded under sl. no. 2 from cpp - pd premises to the designated scrap yard, waste dumping area, or any other location within the fact ud / petro plant premises, as directed by the engineer-in-charge. the contractor shall provide a suitable truck having carrying capacity up to 2 tonnes for the purpose.the rate per trip shall be inclusive of all charges such as vehicle hire, driver wages, fuel, and any other incidental expenses.copies of the relevant scrap dispatch advice and weighbridge report shall be submitted by the contractor for each lot of material transported. the quantity indicated is tentative and payment shall be made based on actual number of trips certified by the engineer-in-charge., the work shall be performed on a manday basis and includes moving and rearranging used materials and equipment parts such as valves, pumps, flanges, motors, radiators, drums, welding sets, structural items, roof sheets, and other related materials stacked at various locations including cpp building north and south entrance areas, boiler feed pump area, tg floor area, and other specified locations, as instructed by the engineer-in-charge. required cleaning materials, rigging materials, tools, tackles, and manpower shall be arranged by the contractor. the eot crane at the tg floor may be used free of cost, subject to availability. loading and unloading for shifting within the petro plant premises shall be in the contractor s scope. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be carried out on a manday basis and includes removal of vegetation from the outer side walls and top platforms of cooling tower cells, removal of vegetation from the side walls and floor of the cooling tower pond, and removal of accumulated mud, slurry, and other unwanted materials within the cpp cooling tower area. all manpower, tools, tackles, and equipment required for execution shall be arranged by the contractor. cleaning of all four cooling tower cells shall be treated as a single activity., the work shall be executed on a manday basis and includes thorough cleaning of the furnace oil (fo) pump house area. furnace oil spillage on floors, including areas beneath oil heaters, around pumps, condensate drains, and adjoining areas, shall be removed by spreading sawdust and collecting the oil-soaked sawdust for proper disposal as instructed by the engineer-in-charge. sawdust, cotton waste, manpower, tools, and all other materials required for complete execution of the work shall be arranged by the contractor. payment shall

Iron Ore Handling Plant Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government