Latest iron rod Tenders | Government iron rod Tenders

Central Government/Public Sector

CTN :45733183

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as mg/bg carriage frames, coach battery box ,tension spring, seat frames of different sizes, berth frames, wheel stand, tie bar gate, ms gate, battery box, empty electrical box, ms window, ms window, hand trolley, hydraulic trolley, gi re mast, window grills, ms grills, ms stands, rolling shutters and partition frames of coaches , wheel stand, suspension rods , foot step, ms boxes, luggage rack, ms pipes, ms cylinder, cut parts of coaches, zinc sheet, transformer body, coach sheets, point machine cover, iron rods, trolley, ms wire, bolt & nut and other nmg coach cutting scrap items coming under ms items with/without ss, plastic, electrical and other nfs attachments on as is where is condition, available under the custody of cdms 08 ward ap. note: pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. note: cutting permitted up to loadable size only ( loc: bin no. 132 at scrap yard)

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

State Government

CTN :45722922

15 Jul, 2026 2.45 Lacs

Satna - Madhya Pradesh

Tender For supply of urchages sanitation material - alum, sanitizer, painting brush 4'', painting brush 6'', sgsv pipe (ceramic pipe 2.50x8), aggregate mix, iron rods (all sizes), iron nails (all sizes), iron angle, iron flat bar, cement sheet (8 ft long), steel mosquito mesh (3 x 1/2 width), chain-link fencing mesh (5 ft width), iron sheet (16 mm), iron pipes (all types), toughened glass (2.6 x 2 ft size), steel tap, kangaroo hp-45 large stapler

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45690190

06 Jul, 2026 NA

Doda - Jammu And Kashmir

Tender For supply of welding machine , black goggle , hammer drill machine , angle grinder machine , welding gloves , welding protection screen , chipping hammer , welding tung , cutter blade , finishing blade , note book , pen , pencil , eraser , pencil sharpener , steel rectangle pipe , iron rod , welding rod , welding cable , hiring of one instructor for trg to 10 beneficiries

Central Government And Public Sector

CTN :45675457

30 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot miscellaneous scrap - lot of scrap ferrous consisting of diesel piston, chain cutter,track machine parts,rr box,pully, liner, piston pin, bearing iron rod,bearing housing diesel loco piston part,cylinder head parts, bull gear of loco & c and w components and other machinery items etc. with or without minor and slightly nf/ steel and other attachment (p.l. no-98321523).

Central Government / Public Sector

CTN :45561156

02 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of a platinum sensor soldering iron rod heating element with an integrated tip temperature controlled soldering station. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45629436

29 Jun, 2026 10.00 Lacs

Deesa - Gujarat

Tender For supply of cleaning equipment at deesa nagarpalika(ii attempt) - first/broom approximately 600 to 700 gram, v type shovel, square m.s shovel, square galvanized shovel, v type shovel with long iron rods, a broom with a raised handle with stick, toothed, trikam, plastic brush with raised handle 3 feet with iron clamp handle, mask(cotton), acid, white phinyle, m.s wire brush with raised handle, pink tablet, gumboot, reflect apron with deesa nagarpalika printed, galvanized supadi, spade, handle of shovel, toothed, spade, trikam, proper shoes, sweater with best quality (male/female), sanitizer 100 ml., sanitizer 200 ml., dettol soap 100 gram, paper napkin, dettol antiseptic liquid 500 ml., dettol hand wash 500 ml., plastic handles of shovels, toothed etc, trikam plastic handles, toothpicks, hand gloves heavy long, stick long 5 foot, rope, scented phenyl, galvanized bucket 10 liter, senetary paid, pvc tagara 16 inch, pvc tagara 18 inch, galvanized tagara 16 inch, galvanized tagara 18 inch, vasi with iron hand, vasi with stick hand, nifa indonesian broom approximately 600 to 700 gram, rain coat with best quality for female, rain coat with best quality for male, broad axe with handle, axe with handle 2.0 k.g, ghan with handle 3.0 k.g, ghan with handle 4.0 k.g

CTN :45632165

11 Jul, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of installation of galvanised wire mesh security fence -security chain link , iron angle y shape , iron rod bar , concertina coil , concrete base , labour and tpt charges

CTN :45450342

25 Jun, 2026 NA

Agra - Uttar Pradesh

Tender For corrigendum : supply of bearing for 15 ft. flex wing rottery cutter , blade set for 15 ft. flex wing rottery cutter , side spindle for 15 ft. flex wing rottery cutter , shaft bolt for 15 ft. flex wing rottery cutter , khinch (pulling iron rod) for 15 ft. flex wing rottery cutter , shocker spring for 15 ft. flex wing rottery cutter , main khinch (primary pulling iron rod) for 15 ft. flex wing rottery cutter , tractor to flexi joint hook for 15 ft. flex wing rottery cutter , side wing shaft set for 15 ft. flex wing rottery cutter , hydraulic lever for 15 ft. flex wing rottery cutter , 'u' hook with lock set for 5 ft. width jungle jim

Iron Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government / Public Sector

corporations/Associations/Others