Latest iron trash Tenders | Government iron trash Tenders

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

Central Government And Public Sector

CTN :45034370

21 May, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of lockiconorganizationlockpinkiconsign in to unlock| send me onwhatsappmail|wishlistexport20days leftreagent kitsreagentsmicrobiology test kitsmedicinetesting equipment - phased array ultrasonic flaw detector 32-128 elements pr configuration with provision of additional 2 numbers of conventional ultrasonic channels , lithium iron battery pack rechargeable type minimum 70 wh having minimum operating time of 4 hours compatible for phased array ultrasonic flaw detector , external battery charger lithium iron battery pack compatible for phased array ultrasonic flaw detector , standard phased array probe , frequency-5.0 mhz , linear array , 64 elements , 0.5 mm pitch , total active aperture 32x10mm , 5 meter cable length , connector compatible for phased array ultrasonic flaw detector , standard phase array probe , frequency-7.5mhz , linear array , 16 elements , 0.5mm pitch , total active aperture-8mm x 10mm , 2.5 meter cable length , connector compatible to phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (26.67mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (48.26mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (73.03mm)axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (88.9mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (168.3mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (219.1mm)axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 55deg refracted angle in steel , shear wave , with ihc. the wedge should feature curvature matching pipe od (273.1mm) axial outside diameter (aod) for circumferential weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (26.67mm) circumferential outside diameter (cod) for axial weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal scan , 60deg refracted angle in steel , shear wave , with ih. the wedge should feature curvature matching pipe od (48.26mm) circumferential outside diameter (cod) for axial weld inspection , compatible for phased array ultrasonic flaw detector , standard wedge for angle beam phased array probe , normal s

Central Government/Public Sector

CTN :45031655

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, engineering items such as rusted barrigaurds,ferrous pipes,fencing scrap,bolts and nuts,false cealing patti, angles, rails adhered or separate, drum, coach cuttings, trolleys, window grills,fabricated gates,battery box in cut condition,angles, guards, dust bins, heavy nature coach parts parts in broken or full condition, pway support structures,gi sheets, pulley, frames, ferrous boxes, sign boards, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates,ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door,sliding door of various sorts & sizes, battery boxes in cutparts,collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, galvanised sheets rusted condition, roof light/tube light fitting with/without ballast, fl housing, tl patti, crushed drums, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires,chains,boxes,hoop iron,lamps,air filter,clips, panels, corroded gi pipes with/without valves, gi duct, ci covers/piper/joints,coach/wagon cutup parts,sheets,equalizing stay,brake anchor,round/square pipes,pipe wrench,pins, rivets, bolts, nuts, small iron pieces,heavy melting scrap,wire rope/safety rope with/without aluminium sling,box type fitting,pipes,dust bin, hood,rack,bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system,battery tray,trough floor sheets,ferrous parts accessories released from carriage/wagon/loco rolling stocks, galvanized sheets of sorts & sizes, sand pipe,rolling shutter,gi/ms angles and channels,rails,cutmast,protectivetube, wagon/coach springs,shockabsorber, suspensionunit, equilising stay, ls beam, bolster, silent block,iron gate,clower cups,guard gril,irongrill,springs,pins, heavy melting scrap,ac duct,gi ipes,ladders and all the above items are of various sorts and sizes in full/cut/broken/damaged and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: 1) cutting is permitted to lorry loadable size only. 2) if any non-ferrous materials found should be handed over to custodian.3) jcb/crane loading is permitted. location: arumugham yard bin a

Central Government And Public Sector

CTN :45031614

08 May, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amalgamating various type consisting of melting scrap class mf/10, pl/8, pl/4, mp/3, b/9, b/14, cs/1, cs/2, hf/1, b/10, b/11, mp/6, j/4, db/1,p/4, mp/1, mp/4, sp/3 (small qty. in mixed condition), mp/5, gi & ms nuts and bolts,iron chair and small parts,cbc component with or without rubber attachement,flap door,low grade steel parts of wagon bodies e.g. irs m-44 etc. twin pack draft gear f-325 g, gi rods,brake beam and air reservoir tank,brake cylinders, pipe, including upto 5 kgs cast iron with ms attachments. as available as in the lot. nb - cutting not allowed .

Central Government/Public Sector

CTN :44942576

28 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, sliding doors, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 3&4

Central Government/Public Sector

CTN :44934743

28 Apr, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amaigamating the varous typed consisting of fresh plate, sheets plate cuting and shearing of all shaped and size. structural sectons, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with head, screw couplings, ties bar all types of eqaulilising beams & centralize beams, fish plate other than cast steel wire & wire rop all types of chains all types of sleeper all types of bars and rods junk kutchra, steel fabriction nut bolt, grease seal etc. [our offer:- 1. scrap bogie bolster, 2. scrap brake beam, 3. scrap ls beam], i lot no ea982604004 , location- 1. scrap yard 2.besides incoming shop.

Central Government/Public Sector

CTN :44934808

27 Apr, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-94405rcc/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/02/0005. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Iron Trash Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector