Latest iron angle Tenders | Government iron angle Tenders

CTN :43529278

20 Jan, 2026 NA

Multi City - Multi State

Tender For supply of iron girder 6 mm thickness depth 6 inch x width 4 inch,c channel 6 mm thickness depth 4 inch x width 2 inch,iron trolley c channel,trolley lock,strong iron trolley wheel with bearing and axles,strong iron track,hand winch with iron rope,electrical winch with iron rope,nuts and bolts,iron angle depth 3 inch x width 2 inch,welding rod and iron cutter

CTN :43532006

12 Jan, 2026 NA

Multi City - Multi State

Tender For supply of shunt safe device(unit) working with 12 volt rechargeable lithium ion battery with alarm, battery indication & water proof cover of box with battery overcharging auto cut & battery charging led indicator. 1. the unit should be an audio visible alarm unit to be used by the shunting staff for their own safety during shunting operations.2. the unit should be made of at least 1.2 mm thick ms sheet duly powder epoxy coasted.3. the visible indication is to be provided with the help of a matrix of blue led?s of 5 mm diameter. the front size matrix should be having 4 rows and 4 columns and the matrices on either side should have 1 column of 4 led?s each. the leds should be flashing with one second off and one second on times. the side led?s should be located at an angle of 32 to 35 degrees from the front matrix, with the objective is to disperse the light in the front, as well as on the two sides.4. the audio alarm should comprise of a loud speaker of such intensity as to be audible from a distance of at least 75 meters in a noisy environment. nominal audio power output of the unit should be 10 watt, which should be provided by the means of the sturdy horn type loud speaker. the horn should be protected with the help of ms bracket of suitable size duly powder coated. the sound is to be intermittent to be decided in consultation with railways.5. the unit should be provided with a battery backup of at least 4 to 5 hours.6. battery 12 v 4.5 ah lithium ?ion battery.7. the unit shall be usable in all weather conditions in open areas. the design should be rainwater proof.8. there should be hook for hanging the device with the coach/wagon. the hook should have a diameter of 2.5 inches and it should be possible to rotate the hook in any direction. hook should be strong enough to sustain the regular used of the unit.9. rubber lining or any other type of shock absorbers should be provided at the bottom and the back side.10. the unit should be provided with a suitable and sturdy on off switch, so located that it is not operated accidentally. a jack plug in arrangement should be provided to facilitate the changing of battery with an external charger.11. the led?s should be protected with the help of an acrylic sheet.12. battery on charge indication should be provided at suitable location.13. external smps charger to be provided for charging batteries. [ warranty period: 30 months after the date of delivery ]

CTN :43529638

21 Jan, 2026 NA

Multi City - Multi State

Tender For supply of angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,angle iron,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,cgi sheet,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,photo frame,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,flex map,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air cooler,voltas air

CTN :43532214

23 Jan, 2026 NA

Multi City - Multi State

Tender For supply of tool box size:- 1.85x0.84x0.83 mtr. of iron angle 8 m.s plate frame 10mm thick cover with g.i. sheet 22 swg & 185 wg [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :43527208

22 Jan, 2026 NA

Nagarcoil - Tamil Nadu

Tender For nagercoil corporation dismantling of well parapet wall and providing iron angle with g.i metal sheet near kuruntheru park at ward no.28

CTN :43521851

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of supply and replacement of engine oil , supply and replacement of element oil filter , supply and replacement of element fuel filter , supply and top up of advanced concentrated coolant mixed at one to three ratio one litre , supply and replacement gear oil , wheel alignment and balancing complete including settle og toe and coster angle of all wheel and addition of weight , complete check and rectify hoses for clog and supply replacement of damage hoses , supply and replacement of break liner set , supply and replacement of rear combination lamp left , complete checking and repair of piston assembley , supply and fixing headlight front left 131 h l a b l l lumex , complete checking or servicing of ignition system and cleaning of powder formed, checking of battery connections , providing distilled water as reqd basis incl cost of bty fully charging , supply and fixing seat cover , cabin light checking and replacement of head lamp with connection wire , m and l for greasing of all wheel bearing and hubs , supply and replacement foot mat , over hauling clutch master and slave cylinder and replacement of clutch fluid , supply and replacement of pressure plate , supply and replacement of petrol tank locking assembly , supply and replacement of mud guard rubber flaps on all wheels , supply and replacement of wiper and pumping servicing , supply and replacement of automatic remote centre door locking system and rectification , tacking down all wheel and rotate the all tyres and complete re fixing properly , supply and replacement rear suspension , serving and labour charges ) /bid number : gem/2026/b/7094936 * /dated: 09-01-2026 & & / bid document 1 / 22

CTN :43503922

19 Jan, 2026 NA

Delhi - Delhi

Tender For supply of supply of insulation material and maint items for assets d d -wooden beading patti , air bubble flim , nails assorted size , rectangular pipe , ms plate 5 mm x 3 ft x 3 ft , angle 2 inch x 3mm , puf panel 16 ft x 3 point 5 ft , ppgi sheet 10 ft x 3 point 5 ft , ridge cover 10 ft , drainage cover sheet , nut and bolt with washer , self thread tapping , iron cutting blade , iron grinding wheel , led surface light , ceiling fan , wire 1 point 5 sqmm , fan regulator modular , pvc conduit pipe , pvc 3 way conduit , pvc 4 way conduit , 32 amp 2 pole mcb with pvc box , squre pipe 1 comma 1 by 2 inch , ppgi sheet 8ft , cement , sand , bricks , pvc door with frame assy , ms square pipe 2 inch x1 point 6mmx 20 ft , bib cock , nani tap 110mm with jali , stop cock , 20w led tube light , switch board moduler with box and plate with 6 amp switch , led bulb 9w , angle holder , 1 sqmm wire , paint rfu black , paint rfu blue , acrylic distemper , red oxide , screw 1 by 2 inch , thinner , hindges , maint of genr sets 82.5 kva incl welding and replacement of oil and filters , control panel for gen set , bty 12v 88ah , exhaust fan , exhaust expansion , carburrator chock cable , fuel control valve , door for genr set , fuel tank strainer , servicing of 15kva genr se , servicing of 7 point 5 kva genr set tmtl , thermostat , static charge defuser , compressor liquid filling of air conditioner , copper pipe , extra heavy duty hdpe tarpauline , servicing of concrete mixture , zephyr insulation for shelter , zephyr insulation for pipes ) /bid number : gem/2026/b/7087378 * /dated: 08-01-2026 & & / bid document 1 / 57

State Government

CTN :42900968

12 Jan, 2026 NA

Haldwani - Uttarakhand

Tender For bid to ras corrigendum : supply of steel rule,try square,caliper inside spring type,caliper hermaphrodite spring type,caliper outside spring type,divider spring type,scriber,centre punch,screw driver,chisel cold flat,hammer ball peen with handle,hammer ball peen with handle,file flat second cut,file flat smooth,file half round second cut,hacksaw frame fixed type,safety goggles,dot punch,steel rule graduated both in metric and english unit,straight edge steel,spirit level metal,stud extractor ezy out,combination set,micrometer outside,micrometer outside,micrometer outside,micrometer inside with extension rods,vernier caliper,vernier height gauges,vernier bevel protractor,screw pitch gauge metric,wire gauge metric standard,surface plate granite with stand and cover,marking table mild steel,universal scribing block,v block pair with clamps,angle plate,punch letter set,punch number set,portable hand drill electric,drill twist straight shank,drill twist taper shank,taps and dies complete in box,taps and dies complete,file knife edge smooth,file fea

Central Government/Public Sector

CTN :43508860

30 Jan, 2026 36.83 Lacs

Lucknow - Uttar Pradesh

Tender For special repair of chain link fencing with iron angle and concertina coil at old location of adm bn, annual maintenance contract c and c alongwith addn/alt to various bldgs of iaf hq cc under ge (east) lucknow.

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Iron Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government