Get complete information related to latest Iron Bar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Iron Bar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Iron Bar Tenders.
Tender For supply and erection of 15 feet gi pipe of 100 mm dia 4.5m thickness of medium quality isi no: 1230(part 1) 1990. having an iron base plate 10 mm thick x 30 cmx 30cm welded at the bottom of the pipe with four supports of ironbars of sizes 10 mm dia. the 3 feet pipe shall be buried in the ground and 12 feet shall be. above the ground. the work includes digging of the pit on platform, laying of cable in between poles in suitable underground gl pipes, erection of pole and filling the pit with 1:3:4 cement, concrete and sand. final plastering should be done on the surface. the iron bracket on the top of the pole shall be provided to fix the cctv camera, protection cover and junction box. the work includes supply of all the materials required in this item. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of portable high-pressure compressor (300 bar) for refilling self-contained breathing apparatus (scba) cylinder with spares as per specification attached in annexure-a. [ warranty period: 30 months after the date of delivery ] ]
Tender For tender for supply of danfoss make compressor and other spares -hermetically sealed scroll compressor , model no. sm110s4vc , 3 phase , 50hz , make danfoss. , reciprocating compressor rotolock type , model no. mtz80hp4ave , 3 phase 340-440v , make danfoss. , reciprocating compressor , rotolock type , model no. mtz56hl4bve , 3 phase , 400v , 50hz , make danfoss. , compressor reciprocating , model nomtz64hm4bve , make danfoss maneurop , hermetically sealed reciprocating compressor model no. mtz72-4vm , 3-phase , 50 hz , make danfoss , hermetic filter drier , model no.023z5007 , type dcl 162 , makedanfoss. , hermetic filter drier , model no.023z5013 , type dcl 032s , make danfoss. , hermetic filter drier , model no.023z5029 , typedcl 163s , make danfoss. , hermetic filter drier , model no. 023z5063 , type dml 162s , make danfoss. , hermetic filter drier , model no.023z5067 , type dml 164s , make danfoss. , hermetic filter drier , model no. 023z5044 , type dml 164 , make danfoss. , hermetic filter drier , model no. 023z4581 , type dml 165s , make danfoss. , hermetic filter drier , model no .023u4381 , make danfoss. , thermostatic expansion valve , typetd 1 , model no.068n2937 , makedanfoss , filter drier model no023z5005 , make danfoss. , thermostatic expansion valve type te2 , model no.068z3403 , make danfoss , thermostatic expansion valve type te2 , model no.068z3209 make danfoss , thermostatic expansion valve type te2 , model no.068z3348 , make danfoss , thermostatic expansion valve type tz2 , model no.068z3496 , make danfoss , pressure switch , 060-124391 type kp15 , contact function spdt , pressure connection size 1/4 , pressure connection type flare , pressure male. , pressure switch model kp5 8 to 32 bar , spdt , flare type make danfoss , orifice for t2 /te2 type therm ostatic expansion valve , model no. 068-2015 , make danfoss , orifice for t2 /te2 type ther mostatic expansion valve , mode l no. 068-2006 , make danfoss , orifice for t2 /te2 type therm ostatic expansion valve , model no. 068-2007 , make danfoss , orifice for t2 /te2 tyep therm ostatic expansion valve , model no. 068-2008 , make danfoss , orifice for t2 /te2 type therm ostatic expansion valve , model no. 068-2009 , make danfoss , solenoid coil model no. 042n7 651 , electrical connection 230 v ac , make danfoss. , digital temperature controller model no. 080g3266 , erc213g , temp. sensor , supply voltage 230vac , make danfoss. , rotolock valve set , model no. 7703006 v07 (1-3/4in-7/8in) , v04 (1-1/4in-3/4in) make danfoss. , rotolock valve set , model no. 7703005 , v09 (1-1/4in-5/8in) , v 06 (1in-1/2in) , make danfoss. , rotolock valve set , model no. 7703004 , v06 (1in-1/2in) , v01 ( 1in-3/8in) , make danfoss. , rotolock valve set , model no. 7703009 , v02 (1-3/4in -1-1/8in) , v04 (1-1/4in-3/4in) , make danf oss. , filter drier for a.c.plant make danfoss model dcl dml-165 , cooling thermostat make danfoss model kp-69 range -5 to 35 degree centi. diff lt 4.5 to 25 degr cent ht 1.8 to 07 degr
Tender For supply of spares of m/s elgi make air compressor model no. 132-8.0 against ssp-81 - maintenance kit 4000 hr, part no 412400929, maintenance kit 16000 hr, part no 412400940, o-ring tube bundle, part no b011307100005, gasket moisture separator, part no 415400434, gasket - mist separator, part no 413400481, o ring, part no 415400656, o ring, part no 990402910, mesh moisture separator, part no b000308380005/ old part no - 413400478, o-ring moisture separator, part no 415401498, rubber elbow ow2, part no 415305938, air filter eg200-250, part no b004700770037, ccva assy ss ow2, part no a410677, air oil separator spinon, part no b006700770010, o-ring id32.9 x 3.5, part no 015402685, o-ring id45.0 x 3.0, part no 035400047, separator hsg assy.,part no 015321611, mesh separator d75 x 80, part no 015404543, elbow connector-g1/4, part no 415401516, elbow connector-g1/2, part no 015403848, 1/4 bsp bonded sealwasher, part no 000959385, 3/8 bsp bonded sealwasher, part no 000959386, 1/2 bsp bonded sealwasher, part no 000959387, valve assy air vent nh1x, part no 41041x022, nylon tube 12x10mm white , part no 000919253, manifold solenoid valve, part no 415302072, oil filter element-75 lpm, part no x017503, kit auto drain valve ad-5, part no b001303900006, grease unirex , part no 015404151, pressure transmitter -1 to 1 bar, part no 018364572, pressure transmitter -1 to 3 bar, part no 018364573, pressure transmitter 0-6 bar, part no 008979018, pressure transmitter -1 to 6 bar, part no 00897902r, temp transmitter (0-150 c), part no 018400478, temp transmitter (0-300 c), part no 018400479, neuron -iv controller plc, part no 018364634, item wise boq
Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 2/a ,7/a & ground floor at near bin -37.exmp.06.2026-27.03 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as- scrap aluminium cylinder for tap changer, aluminium number plate, aluminium feeder wire, steady arm, anti wind clamp, wiper motor, bus bar connector (aluminium), part of filter element of emu motor coaches, compressor & air dryer spares, horn, gauge cover, piston sub assembly, and other aluminium misc.as in the lot which are kept in bin no-2/a & ground floor of near bin 37. qty= 1929 kgs. b) scrap aluminium rear & front cover with or without rubber and grease attachment. in bin no- 7/a . qty- 2462 kgs. loading will be done by purchaser's own arrangment.
Tender For supply of air compressor spares, dryer and overhauling oil seal pump shaft , oil filter , air filter complete , piston ring , valve discharge complete , channel & spring set , oil seal -c-shaft , oil pump assmbely , connecting rod and cap assembly , gasket set complete , valve inlet complete , ring piston , o-ring , plunger unloader complete , aux valve (range 60x125) , head frame complete , piston complete , oil pressure gauge , spares for air compressor , make:- ingersoll rand , model : 2540 , crankpin bushing , connecting rod , ball bearing , ball bearing w/snap ring , inner bearing spacer , ring/gasket kit , gasket set , ring lock , pin piston , pin piston , element filter-10 micron , assembly ,spacer /valve low pressure , assembly ,spacer /valve high pressure , valve finger , filter- inlet complete , element filter-10 micron , ring set complete 7100 , valve set complete 7100 , gas kit set complete 7100 , air filter ir , csc unloader-7100 , pilot valve - lp , auxilary valve-lp , discharge tube -97045405 , size: 182mm x 512mm , oil t-30 , hp head cylinder with piston & accessories for air compressor make : ir model ir 7100 , lp head cylinder with piston & accessories for air compressor make : ir model ir 7100 , air dryer , make-ir, model-d144 in-a , sr.no. nar10084230 , air flow : 2400 i/min , electric power :74kw max , pressure : 14 bar , ambient temperature : 50 deg c , max. inlet temp : 60 deg c , cooling fluid: r134a-0.3kg , power supply : 230v/1/50 , overhauling of air compressors with necessary spares replacement
Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat ironbars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one