Latest iron chair Tenders | Government iron chair Tenders

CTN :45257491

22 Jun, 2026 2.30 Crore

Sibsagar - Assam

Tender For corrigendum : supply of spares for dresser rand make gas compressor unit #6, #7 and #8 of phase-ii power house, lakwa thermal power station (ltps), maibella, charaideo - cross head rds (with bushing), ring piston 23" non combo, ring piston 13" non combo, ring packing, ring packing, suction valve 200ckt, seat 200ckt, valve plate 200ckt, wafer spring 200ckt, closing spring, suction valve 147cht, seat 147cht, valve plate 147cht, wafer spring 147cht, closing spring 147cht, discharge valve 200ckt, seat 200ckt, valve plate 200ckt, wafer spring 200ckt, closing spring, discharge valve 147cht, seat 147cht, valve plate 147cht, wafer spring 147cht, closing spring 147cht, bearing main, connecting rod bearing, assembly piston and rod, ring piston 23 combo, ring piston 13 combo, yolk assembly, stud cylinder frame, nut cylinder frame to yoke, connecting rod, gasket hp valve seat, gasket hp valve cover, gasket lp valve seat, gasket valve cover, cartridge filter, rexnord@thomas@disc couplings disc pack type amr700, rexnord@thomas@disc couplings hardware kit* amr700(*1 set of hardware kit consists of 16 nos. each of bolts, locknuts and washers.)

State Government

CTN :45510466

25 Jun, 2026 NA

Silvassa - Gujarat

Tender For providing and installing gymnasium equipment at opp. sainik school, mota randha, d&nh. - pec dec flyfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* .50 dia. connecting bolts* extended handle provides multiple gripping positions.* adjustable seat.standard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 503lb / 228.16kgmainframe - 11 gauge 2.375 x 4.625 oval tubingcables - fiberglass reinforced nylon pulleys.upholstery - durafirm upholstery over 2 high density foamdimensions - 34"w x 57"l x 69"h (86cm x 145cm x 173cm), lat pull down + rowingfeatures:* dual-function design: enables both lat pull-down and vertical row exercises in one machine.* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat & leg hold downsstandard weight stack - 2:1 weight ratio with a 210 lb. weight stack provides 420 lbs. of resistance. also available in a 310 lb. weight stack.product weight - 549lb / 249.03kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 41 w x 78 l x 77 h (104cm x 199cm x 196cm), leg curl/leg extensionfeatures:* continuous welded, factory assembled weight frame.* fiberglass reinforced nylon pulleys.* industrially rated, sealed bearings at all pivot points.* 3 gauge steel connecting plates.* adjustable seat back and leg rollersstandard weight stack - includes a 210 lb. weight stack with a 310 lb. weight stack option.product weight - 505lb / 229.07kgmainframe - 11 gauge 2.375" x 4.625" oval tubing,cables - 5.5mm dia., 2500lb rated aircraft cable.upholstery - durafirm" upholstery with over 2" high density foamdimensions: 53 w x 40 l x 62 h (135cm x 102cm x 158cm), dip/chin assist*dual-function design: supports both weight-assisted chin-ups (pull-ups) and dips in one machine.*adjustable weight assistance: allows users to select assistance level based on strength and training goals.*heavy-duty commercial frame: built with high-quality steel for durability in high-traffic gym environments.*smooth counterbalanced system: ensures fluid, controlled motion throughout the exercise range.*ergonomic multi-grip handles: provide varied grip options for targeted upper-body training.*non-slip knee platform: offers secure support and comfort during assisted exercises.*premium upholstery & finish: durable padding and corrosion-resistant coating for long-term usesize: 58 x 46 x 85 inchesweight stack: 80kg, wrist curl machinesize: 18" x 34" x 39.37" weight stack: 100kg, preacher curl bench*ergonomic design: the bench is designed to support the user in a seated position, allowing for proper alignment and reducing the risk of injury.*adjustable components: features adjustable arm pads and seat height to accommodate users of various sizes, ensuring comfort and effectiveness during workouts.*durable construction: built with high-quality materials to withstand heavy use in both commercial and home gym settings.*compact footprint: designed to fit into smaller workout spaces without compromising on performance.size: 36" x 36" x 37", adjustable bench6-position ladder-style back pad adjustmentdimension: 59" length x 27" width x 22" height, simple flat bench, dumbbell rackholds one (1) pair each of 5-50 lb. hex dumbbells.30"h x 20"l x 40"wheavy duty 12-gauge steel construction, plate tree, functional trainersize: 80.8" x 55.3" x 24" weight stack both side: 150kg2:1 pulley ratio for smooth resistance32 adjustable cable positions81" cable travel lengthpremium aluminum pulleys for ultra-smooth motionintegrated multi-grip pull-up barband pegs for added resistance trainingbuilt-in pegboard storage sys

Central Government/Public Sector

CTN :45499723

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For supply of 1 insert , 2 upper stopper , 3 nut , 4 nut , 5 forked adopter , 6 washer , 7 tube , 8 lever , 9 fork , 10 fork , 11 cover , 12 adjustable end tip , 13 nut , 14 end tip , 15 adjustable lugged terminal , 16 end piece with lug , 17 eye end tip , 18 double lug adjustable tip , 19 frok-shap terminal , 20 adjustable tip , 21 lug , 22 catch , 23 support , 24 adapter , 25 elbow , 26 elbow , 27 elbow , 28 angle plate with flange , 29 angle , 30 flange angle plate , 31 elbow , 32 flange angle , 33 t-piece with connecting flange , 34 t-piece , 35 tee-piece , 36 tee- piece , 37 flanged angle plate , 38 flanged t-piece , 39 adapter t-piece , 40 flanged t-piece , 41 flanged t- piece , 42 axis , 43 bush , 44 bush , 45 bush , 46 bush , 47 flanged elbow , 48 flanged t-piece , 49 t-piece with flange , 50 lever , 51 fork-shape terminal , 52 collector , 53 nut , 54 body , 55 flange , 56 flanged angle plate , 57 flange , 58 end tip , 59 seat , 60 turn buckle , 61 plate , 62 bush , 63 body , 64 t-piece , 65 flange , 66 elbow , 67 angle , 68 flange , 69 flange , 70 flange , 71 body , 72 tee-piece , 73 elbow , 74 pipe connection , 75 angle , 76 body , 77 tee piece , 78 t- piece , 79 elbow , 80 eye end , 81 lug , 82 fork , 83 lug , 84 eye end , 85 bush throttle assly , 86 bush throttle assly , 87 bush throttle assembly , 88 screw , 89 elbow , 90 pipe connection , 91 handle , 92 pipe connection , 93 valve , 94 limiter of consumption , 95 nut , 96 ring , 97 ring , 98 ring , 99 bush , 100 flange , 101 flange , 102 pipe connection , 103 pipe connection , 104 pipe connection , 105 elbow , 106 fork , 107 end piece , 108 end piece , 109 nut , 110 nut , 111 ring , 112 ring , 113 flange , 114 body , 115 body , 116 body , 117 body , 118 body , 119 body , 120 sleeve , 121 sleeve , 122 sleeve , 123 sleeve , 124 sleeve , 125 sleeve , 126 sleeve , 127 ring , 128 nut , 129 nut , 130 nut , 131 nut , 132 flange , 133 flange , 134 flange , 135 nut , 136 nut , 137 nut , 138 nut , 139 nut , 140 nut , 141 nut , 142 nut , 143 end pipe , 144 body , 145 body , 146 plug , 147 plug , 148 plug , 149 plug , 150 pipe connection , 151 nut , 152 pipe connection , 153 pipe connection , 154 pipe connection , 155 pipe connection , 156 pipe connection , 157 cap , 158 frame of cap , 159 bush , 160 flange , 161 adapter , 162 cross piece , 163 cross piece , 164 tee-piece , 165 angle , 166 elbow , 167 pipe connection , 168 flanged elbow , 169 tee- piece , 170 flanged t-piece , 171 adapter t-piece , 172 tee-piece , 173 cross piece , 174 screw in adapter , 175 locator clamp , 176 flange , 177 end piece , 178 elbow , 179 end tip , 180 flange , 181 roller

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

State Government

CTN :45491660

11 Jun, 2026 NA

Rohtak - Haryana

Tender For quotation for fiber seat with frame

CTN :45373225

12 Jun, 2026 NA

Jaipur - Rajasthan

Tender For bid to ras supply of curtain rode holder , water tank cover , glass plain 4mm 4x3 , cp whb mixture 15mm dia , cp bib cock 15 mm , ewc floor mounted tile complete set , kitchen stand ss 40x36x10 , ss tower bolt 150mm , cp angle valve 15 mm , ewc seat cover , glass shelf 18 inch , glass corner 10 inch eith angle frame , cp towel ring , door stoper double aluminium , pvc waste pipe 32x 800 , fancy overhead shower 150 mm , gi tubing 20 mm , door seal 4 feet long , syphon set complete , cpvc pipe 20 mm , oil putty , tower bolt aluminium 150 mm , door handle aluminium 150mm , spindle 15mm , cp tower rail 600mm , tumbler holder , tower bolt aluminium 100mm , cpvc pipe 25 mm , cpvc pipe 15 mm , cloth hanger 5 pin , mcb 4 pole 63 amp , mccb 4 pole 250 amp , false ceiling light 2x2 , copper cable 1.5sqsingle core , regulator for fan , copper cable sigle core 4 sqmm , geyzer 25 liter , sp 32 amp , regulator socket type for fan , led bulb warm white threaded , mcb sp 10 amp , copper cable single core 2.5 sqmm , socket modular 6 amp , mcb sp 25 amp , mcb 16 amp , modular gang box 4 module , wash hand basin , waste coupling , angle valve , connection pipe , soap dish , towel ring , health faucet , toilet paper holder , towel rack , towel rail , soap dispensor , wash hand basin mixer , ewc , two way bib tap , grating 150 x150 , corner self , looking mirror , wall mixer , bathroom shower , hand shower , sink mixer , sink stainless stell , urinal , pressmatic , urinal partition , pillar cock 200 mm extention , bottle trap , singlr pc water closet , automatic hand dryer , capacitors for electric fan motors as per is 1709 (v2) (q3) //bid details 2 / 60

CTN :45488099

17 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - pl no.98057054, sc. melting gr.d consisting of coach cutting of m.s.items, axle guide, a.l.bkt, l.s.box, t/floor, solebar, panel, body patch, endwall, sidewall, outer headstock, composite headstock, miscellaneous bogie fittings item, cross bar, cut pcs of pannel and channel,misc. ferrous nuts and bolts, foot step, pipe fittings, moulding, short cross member, inner wave, door collar,diagonal top plate, protection tube, handle, step hanger, cut pcs of l.s.beam and plates, ms tressle, bk. beam and dash pot spring, oxy cutting of ms seat-berth frame and miscellaneousllaneous m.s items of sorts and sizes. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

CTN :45488104

17 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - pl no.98057054, sc. melting gr.d consisting of coach cutting of m.s.items, axle guide, a.l.bkt, l.s.box, t/floor, solebar, panel, body patch, endwall, sidewall, outer headstock, composite headstock, miscellaneous bogie fittings item, cross bar, cut pcs of pannel and channel,misc. ferrous nuts and bolts, foot step, pipe fittings, moulding, short cross member, inner wave, door collar,diagonal top plate, protection tube, handle, step hanger, cut pcs of l.s.beam and plates, ms tressle, bk. beam and dash pot spring, oxy cutting of ms seat-berth frame and miscellaneousllaneous m.s items of sorts and sizes. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

CTN :45469639

16 Jun, 2026 NA

Bulandshahr - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; furniture; buyer - bed for female students: size 6'x3'x1.5'; angle iron frame (35x35x5 mm, isi marked); 10 mm plywood base (isi marked); front (1 ft) and back (4") supports; finished with black/grey paint; two additional supports fitted with nuts and bolts on the middle frame. desk for female students: size 3'x2'x2.5'; 18-gauge 1"x1" square pipe frame; footrests provided in the middle and on the sides; finished with black/grey paint; edges fitted with polished wooden beading. chair with armrests for female students: seating height 18", backrest height 34", seat size 18"x18"; 12 mm plywood (isi marked) with 8 mm laminate finish; sheesham wood armrests. dining table: size 8'x3'x2.5'; steel angle iron frame (35x35x5 mm, isi marked); 19 mm commercial board with 8 mm laminate finish; sheesham wood edge beading; 6-leg support structure; polished finish. armless dining chair: 25x25 mm square pipe (18-gauge); steel sheet seat and backrest; size 33" (height) x 16" x 18".

State Government

CTN :45478262

13 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te

Iron Chair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government